Yes. CameraFi’s Android beginner guide lists YouTube as a streaming destination and video files as selectable broadcast sources, so you can use CameraFi Live to send a saved clip to YouTube from an Android phone.
The guide documents the destination and source controls, but it does not give one dedicated, end-to-end procedure for this exact combination. Use the route below as a guide to the documented controls, then test the file and the YouTube result in your installed app before scheduling a stream.
CameraFi documents video-file sources
CameraFi’s Android beginner guide, published by the CameraFi team on 27 December 2024, describes choosing a streaming platform from the home screen, signing in to that platform, and selecting broadcast sources from the app’s Video controls. Its source list includes the smartphone’s built-in camera, a USB camera, video files and image files. The same guide identifies YouTube among the platform choices.
That is enough to answer the capability question: a prerecorded video file is a documented source, and YouTube is a documented destination. It is not enough to assume every detail of playback on your phone. The pages reviewed do not specify supported file formats or maximum file size or duration, and they do not say whether a selected file repeats when it reaches the end. Try the precise file and version you intend to use before relying on it for a planned broadcast.
The workflow is distinct from streaming a live camera feed. With a camera source, the app transmits what the camera sees; with a file source, it uses a saved video as the input. CameraFi also describes a source switcher on its main screen, which lets you change sources during a broadcast, but that does not establish how a file behaves at its end or whether switching is seamless.
The Google Play listing for CameraFi Live likewise describes video files as a source and YouTube as a streaming server. It states Android 5.0 or above as the compatible OS version and notes that available video sizes vary by streaming platform and smartphone model. The listing was updated on 17 September 2026. These details help set expectations, but the listing does not replace a check on your particular device.
Select YouTube as the destination
Start at CameraFi Live’s home screen and choose YouTube from the platform options. The destination determines where the app will send the broadcast; selecting a video file later is a separate choice about what the broadcast contains. Keeping those two decisions distinct makes it easier to diagnose a problem: a selected clip does not by itself mean YouTube is properly connected, and choosing YouTube does not by itself mean the clip is the current source.
Follow the prompts in the app after selecting the platform. CameraFi’s guide describes a platform login flow, rather than supplying a single combined local-file-to-YouTube walkthrough. Menu wording and screen layout can change between app versions, so use the current screen labels instead of relying on screenshots or instructions for a different release.
Before moving on, confirm that YouTube is the destination shown in the app. If you have more than one streaming platform available in your version, do not assume the last-used choice is the one selected now. The important check is that the destination you intend to use is visible in the broadcast setup before you proceed to the source controls.
For an ongoing channel, a saved clip may be only one part of a longer rotation. This app-guide question is about selecting one file as an input, not about building a repeatable schedule of multiple clips. If you need a rotating playlist for an always-on channel, compare that requirement with a separate workflow such as rotating videos in a 24/7 YouTube live stream. Do not infer continuous rotation from CameraFi’s source selection guide.
Complete the YouTube platform login flow
CameraFi’s Android guide says to choose a platform and continue through that platform’s login process. Complete the prompts shown in your app, and read any permission or account-selection screen before confirming it. If YouTube offers a choice of account, take care to use the channel you mean to broadcast from, particularly if the phone is shared or several accounts are signed in.
The guide does not establish whether your account currently has live-streaming access. Availability and account status are matters to verify in YouTube itself, not something to assume from being able to open CameraFi. Check YouTube’s current live streaming help and the Live controls in your own account for any current restrictions or setup prompts. The CameraFi FAQ on YouTube streaming is dated 2020, so it should not be treated as a statement of current account requirements.
After login, look for an indication in CameraFi that the platform setup is complete or that you have reached the broadcast interface. If the flow returns you to the home screen or asks you to sign in again, resolve that before selecting a source. Avoid treating an unconfirmed sign-in as a working broadcast connection.
This is also the point to check which channel is active in YouTube, not simply which Google account is present on the phone. YouTube may expose channel identity separately from account identity. Confirm the intended channel in YouTube’s own controls before you start a public or scheduled broadcast, and use a private or otherwise low-risk test where that suits your workflow.
Open the Video source controls
Once the app is in its broadcast interface, use the swipe menu described by CameraFi’s guide and open the Video control. CameraFi says this area is where sources to transmit can be added. The guide’s source list includes video files as well as camera and image inputs. Follow the current interface prompts to reach the file selection step.
The main-screen source switcher and the Video control serve related but different purposes. The Video control is where the documented guide says to add sources; the source switcher is for moving between sources in the broadcast interface. If the clip is not visibly selected after you add it, do not assume it has become the active input. Use the source-selection controls to inspect what the app is set to transmit.
If you are used to sending a live camera image, remember that your camera may remain available as another source. Check for an explicit selected-source indication before starting. A camera preview when you expected a file is a reason to pause and correct the selection, rather than to proceed on the assumption that the app will switch automatically.
Keep the first test simple: one intended destination and one intended file. Adding extra sources or switching repeatedly makes it harder to tell what viewers will receive. If your aim is a single recorded lesson, bhajan, ambience video or announcement, the most useful check is that the file itself is the current input and that the destination still reads YouTube.
Choose the prerecorded file
Use the file picker or selection prompt presented by CameraFi to locate the saved video on your phone. The exact labels and storage locations depend on your installed app and Android version; the official guide establishes that video files are a supported source category, but it does not document every picker screen. Select the intended clip and allow the app to return to its broadcast interface.
Before broadcasting, check the selected filename or preview if the app presents one. If there are similarly named versions, compare them deliberately. For instance, a channel operator with both a short sample and a full-length recording should make sure the full recording is selected, not infer it from a thumbnail or the order of files.
CameraFi’s reviewed official pages do not state a list of supported local-file formats, a maximum file length or size, or whether the app loops the file after playback. Avoid building a schedule around those unknowns. Play the clip through the app in a test session and observe what happens at the end, if the duration matters. If you need a repeating stream, do not treat a single file-source selection as proof of a looping feature. For a workflow specifically about repeating saved content, see how to loop pre-recorded study-with-me videos on YouTube Live; it addresses a different operational question.
The Play listing says available video sizes vary by platform and smartphone model. That is a useful reason to inspect the actual result rather than expect the same output on every phone. Use the device you will stream from and check for cropping, an unexpected aspect ratio, unreadable text, or an image that appears too small. This check concerns what reaches the viewer, not just whether the file is accepted as a source.
If your clip has spoken content or music, also check that sound is present in the test. The reviewed CameraFi sources identify video files as sources but do not give a detailed audio checklist for this route. A stream that displays the right image but not its expected sound is still a failed test; if your normal workflow uses a desktop encoder, this checklist for a YouTube stream with no audio can help frame the symptoms to inspect, though its VLC-specific fixes do not automatically apply to CameraFi.
Check the selected source before broadcasting
Treat source selection as a pre-flight check, not as a step you can safely skip. Confirm the intended YouTube destination, confirm the correct local file, and confirm the app’s visible active-source state. Where a preview is available, inspect it long enough to catch an accidental camera feed, a blank frame or the wrong clip. These checks are more reliable than remembering what you selected several screens earlier.
Check practical conditions on the phone as well. Make sure the file is accessible, the device has enough battery or power for the planned test, and the network connection is suitable for the session. Those are ordinary operational checks, not CameraFi guarantees. The official sources reviewed do not promise that a file will keep playing through a device interruption, a network change or an app exit.
For an important broadcast, use a short test before the planned session and verify both sides: the app’s outgoing source and the picture and sound visible in YouTube. If you are preparing a longer channel schedule, test at the time and location you expect to use. A file opening correctly on a different device or network does not prove the same outcome in your actual setup.
A useful test record can be very brief: note the phone model, app version, filename and what appeared on YouTube. That gives you something concrete to compare if you replace the file or update the app. Do not turn that note into an assumption that future versions behave identically; repeat the check after a material change to the app, phone, file or destination setup.
Verify the result on the YouTube Live page
After you initiate a test broadcast, check YouTube’s Live page or Live control room for the incoming picture and sound. Confirm that the stream appears on the intended channel and that the expected file is visible, rather than relying solely on a “connected” state in CameraFi. YouTube’s live streaming help is the primary place to review current Live controls and account-side information.
Look for the details that matter to your content: the correct clip, legible framing, expected audio and a stable-looking preview during the test. If the YouTube page shows a camera image, blank output or the wrong video, return to CameraFi’s source controls and check what is selected. If the app shows the intended file but YouTube does not show the same result, check the destination and the YouTube session before repeating the test.
Do not make a public announcement or rely on an all-night run until you have seen the test from the viewer side and know what happens when the clip reaches its end. The official guide confirms source and destination availability; it does not promise a particular playback duration, looping behaviour or uninterrupted operation. For a channel where an unattended overnight run matters, a single successful preview is not evidence that the file repeats or that all later interruptions will resolve automatically.
If your real requirement is that a prepared file continue as a 24/7 stream while your computer is switched off, this is a different operating need from selecting a file in a phone app. StreamNeo turns an uploaded video into a YouTube live stream, so you do not have to leave a phone running beside a local file for that specific always-on task. Keep the CameraFi route for a phone-based broadcast you can supervise and test; choose a workflow to match whether you need a one-off source selection or an ongoing channel.
Before committing, compare the operating options on the pricing page. When the file and channel are ready, start free — 24-hour trial, no card.
FAQ
Can I stream a saved video from my Android phone to YouTube using CameraFi Live?
Yes. CameraFi’s Android guide lists both YouTube as a platform and video files as a Video source. It does not provide a single dedicated procedure for this exact pairing, so follow the platform and source controls in your installed version and test before relying on it.
Does CameraFi Live loop a selected video file?
The CameraFi pages reviewed do not confirm whether a video repeats or stops after one play. Test the selected clip in your installed version if its end behaviour matters, and do not plan a continuous stream on an assumed loop.
Which video formats and file sizes are supported?
The reviewed guide and Play listing do not specify supported file formats or maximum file size or duration. Try the actual file on the phone you intend to use, and check the result on YouTube before scheduling a broadcast.
Is RTMP input needed for this local-file workflow?
No RTMP input is needed for the documented route of choosing a local video-file source in CameraFi and selecting YouTube as the destination. CameraFi’s June 2026 Android update describes RTMP input as a separate beta feature for receiving an external feed, not as the local-file-to-YouTube steps described here.