Larix Broadcaster’s published materials describe reconnect behaviour for network interruptions, but do not document a guarantee that the app will relaunch and resume a YouTube broadcast after a crash. If the app process has stopped, plan to reopen Larix and start the broadcast again unless Softvelum confirms crash recovery for your exact device and build.
That distinction matters for an unattended channel. A network retry can work only while the app is running; a crash removes the process that would make the retry. Background streaming and auto-start are also separate features, not proof of crash recovery.
Short answer: reconnect is not crash recovery
The practical answer is: do not rely on Larix Broadcaster to restart itself and resume a YouTube stream after an app crash. Softvelum’s published material describes network reconnect settings and background operation, while the app listings describe auto-start for automated workflows. The material checked for this article does not promise that Larix will relaunch after a crash and restore an interrupted YouTube broadcast.
This is a limit on what the documentation establishes, not a claim that no particular phone or build could ever behave differently. Mobile operating systems and device settings can affect what happens when an app stops. Unless Softvelum confirms the behaviour for your setup, assume that an app crash requires you to open Larix again and start the broadcast manually.
It helps to name the failure correctly. A stream can lose its network while Larix remains open. Larix itself can be closed or killed. Or Larix can still be sending a feed while YouTube reports a separate stream-health issue. Those events may look similar from a viewer’s perspective, but the recovery steps are not the same.
What Larix network reconnect settings address
Softvelum’s Larix FAQ describes advanced connection settings that include a reconnect timeout. It also discusses retry behaviour when a network interruption occurs. These settings govern attempts to restore a publishing connection while the app is present to make those attempts. They should not be treated as an instruction to reopen a terminated app.
The FAQ also notes that, by default, streams do not retry when the network occasionally goes offline, and describes an option for attempting connection regardless of network presence when starting or resuming. Check the current FAQ and the settings shown in your app before changing anything: labels and behaviour can vary by app version or platform. The useful question is whether Larix is still running and trying to publish, not simply whether the phone has internet again.
For example, suppose a shop’s Wi-Fi drops while a promotional loop is running. If Larix remains open, its configured reconnect behaviour may be relevant once the connection returns. If the app process has crashed during the same outage, a reconnect timeout cannot by itself recreate that process. For a broader diagnosis of interruptions that do not involve a confirmed app crash, see our guide to fixing YouTube Live disconnections in an overnight shop loop.
Treat reconnect settings as one layer of a recovery plan. They may reduce the need for a person to intervene after a temporary connection loss, but they do not remove the need to check whether the app is still open. For a phone-based setup, keep a way to inspect the device and reopen the app available, particularly before leaving the stream unattended.
What happens when the app process crashes
A crash means the app process has stopped unexpectedly. If Larix is no longer running, its in-app publishing and retry logic is no longer active. That is why a configured retry cannot be assumed to relaunch the app. The missing step is not another connection attempt; it is getting the app running again and initiating the encoder feed.
There are several ways a failure can be mistaken for a crash. A black or frozen preview, an offline indicator in YouTube Studio, a dropped network connection, or the app disappearing from view each gives different clues. Check the phone first: is Larix still open, is it showing a live session, and is the device connected? If Larix has vanished or returned to its home screen, treat that as a possible process stop, rather than waiting for a network reconnect setting to fix it.
Background operation is not the same as recovery from termination either. Softvelum documents Android streaming in the background until the app is explicitly closed. Its FAQ describes a substantial iOS limitation: in background mode, the encoder and camera are unavailable and only audio is possible. These descriptions concern operation while the app is present and subject to platform limits. They are not promises to recover a process after a crash.
The difference matters if the channel depends on video as well as sound. An Android phone may continue a background stream under documented conditions, but that does not establish what happens after a crash. On iOS, the documented background restriction means you should not assume that a camera-based stream continues as normal if the app is sent to the background. Confirm how your specific streaming mode behaves rather than generalising from the word “background”.
How to reopen Larix and restart the broadcast
When you have access to the phone, first make sure it is powered, connected to a suitable network, and not showing an operating-system warning that needs attention. Open Larix and inspect the selected connection or stream configuration. Confirm that it is the intended YouTube destination, then start the broadcast from Larix. YouTube’s encoder setup guidance describes configuring the encoder with the server URL and stream key, then starting the feed from the encoder.
If Larix opens but does not appear to publish, check the selected server URL and stream name or key against the YouTube workflow you intend to use. Larix’s connection documentation explains its connection setup, including the YouTube RTMP connection details. Keep credentials private: do not post a stream key in a screenshot or send it through a public support channel. If the key may have been exposed, follow YouTube’s current instructions for managing it.
Do not assume that an existing scheduled broadcast in YouTube will cause a stopped phone app to restart. YouTube receives the encoder feed; the phone app must be open and configured to send it. If you need to understand what happens to a long-running channel when a source restarts, our guide on reusing a YouTube stream key for a 24/7 channel covers that adjacent question. Reusing a key and relaunching Larix are different actions.
If you cannot reach the device, a remote-control feature does not necessarily solve the problem. Softvelum’s Larix Tuner documentation describes remote start, stop, pause, and resume actions for a Larix instance after control has been handed to the service. That describes control of an instance, not documented detection of a crash or recreation of a stopped app. Ask Softvelum whether the feature covers your particular recovery case before making it part of an unattended plan.
Check the YouTube stream state after recovery
After starting Larix, check both ends of the workflow: the encoder on the phone and the live stream in YouTube Studio. Look for evidence that Larix is publishing and that YouTube is receiving the feed. Confirm that the correct scheduled or live broadcast is selected, and that its preview or stream-health view reflects the new feed. Do not infer success solely because Larix shows a running timer; the receiving side also needs to be checked.
The order of operations matters. YouTube’s encoder instructions put the configured server URL and stream key in the encoder, then call for starting the stream from the encoder. Depending on the YouTube workflow you selected, there may be a separate step to start or confirm the live broadcast in Studio. Follow the current instructions for that workflow rather than assuming that restarting the encoder always makes a public broadcast visible immediately.
If the stream is not arriving, pause before repeatedly changing settings. Check network access, destination details, selected event, and any YouTube status message. A fresh attempt with the wrong key or a different destination can add confusion to the original failure. Our article on recovering after an encoder restart and a YouTube stream-health warning is useful when the app has been restarted but YouTube still reports a problem.
For a devotional channel, for instance, a person might reopen Larix, confirm that the configured feed is reaching the intended YouTube stream, and then check the viewer-facing page from another device. That simple second-device check can reveal a mismatch between a local app display and what viewers receive. It is a verification step, not a guarantee that a stream will remain available after the person leaves.
Reduce avoidable interruptions with a test plan
Before relying on a phone for a long unattended run, test the workflow while someone can intervene. Record the phone model, operating system, Larix version, stream mode, and network used. Start a non-critical test broadcast or other suitable private test, then observe what happens when the network disconnects and returns. Note whether Larix remains open and whether its configured reconnect behaviour restores publishing.
Test app termination separately, and do so only in a way that does not disrupt a production broadcast. The point is to find out what your device actually does when Larix stops, not to assume that a network test covers a crash. If the app must be opened manually, write down who can do that and how they will confirm that YouTube is receiving the feed. If the behaviour is unclear, ask Softvelum about that exact device and build before relying on it overnight.
A useful recovery note should be short enough for someone else to follow: where the phone is, how to unlock it, which Larix connection to select, where the current YouTube stream is monitored, and who can access the stream key if a configuration repair is necessary. Store credentials securely and give only the access needed for the task. A written procedure will not make the app restart automatically, but it can shorten the time between discovering a failure and restoring the feed.
Compare recovery expectations across the failure types before choosing your operating plan:
| Event | What may still be running | What to check | Sensible recovery assumption |
|---|---|---|---|
| Temporary network loss | Larix may remain open | Network state and Larix reconnect settings | A retry may help if the app remains active; verify the feed returns |
| App process crash | Larix may have stopped | Whether the app is still running and whether the phone reports an error | Expect to reopen Larix and start the feed unless your exact setup is confirmed otherwise |
| App in background | Larix may remain active, subject to platform limits | Operating system, app mode, and whether audio/video are still being sent | Do not treat background behaviour as crash recovery |
| Encoder feed restored | Larix may be publishing again | YouTube Studio’s selected stream and incoming feed | Confirm YouTube receives the feed and follow its live workflow |
A device test has limits. It tells you what happened on that handset, operating-system version, app build, network and test conditions. It does not prove that a later update, another phone, or a different crash condition will behave identically. For an important channel, keep a human recovery route even after a test appears successful.
If a night-time failure would be costly, compare the phone’s manual recovery burden with other operating approaches before committing. A prerecorded channel may be easier to manage from a workflow designed to keep playing when your personal computer is switched off; our guide to choosing a cloud service for a prerecorded YouTube live channel explains the questions to ask. That is a different use case from a mobile camera stream, so choose based on what your channel actually needs.
What to verify for your exact device and build
Check the current Larix FAQ and platform pages for the behaviour and settings relevant to your operating system. The Android and iOS pages are not interchangeable, and broad compatibility information does not predict how every current handset behaves after a process crash. Check the live app listing and release notes too, but read an auto-start feature or a crash-fix note narrowly: neither statement on its own documents crash relaunch followed by YouTube stream restoration.
The current Google Play listing describes auto-start as a professional feature for automated live workflows. Apple’s App Store version history has also listed streaming auto-start in Advanced settings. Those descriptions establish that an auto-start capability is presented in the listings; they do not establish that the app is relaunched after it crashes or that an interrupted YouTube session is restored. If you use auto-start, ask Softvelum what it starts, under which conditions, and whether the answer covers process termination on your device.
The App Store history also includes a release note for a crash fix on older iOS versions. A fix for a reported crash is not a recovery feature. It may reduce one cause of failure, but it cannot be read as a promise that every crash will be followed by automatic restart. Check current notes for your own installed version and distinguish “fixes a crash” from “recovers a stream after a crash”.
Before putting a setup into unattended use, verify the exact phone, OS version, Larix build, stream mode, power arrangement, and YouTube workflow you intend to keep in service. Confirm whether sending Larix to the background changes video or audio, what happens after an ordinary network outage, and what happens if the app process ends. The research behind this article did not test devices; do not treat the checks described here as results from a device test.
If you need a dependable answer for a particular combination, give Softvelum the device model, operating-system version, Larix version, and a clear description of the failure. Ask specifically whether it supports relaunching the app process and resuming the YouTube broadcast after that process stops. A general statement about reconnect, background streaming or auto-start is not a substitute for confirmation of that specific behaviour.
For a mobile stream that cannot be interrupted, decide in advance what should happen when no one is beside the phone. That might mean accepting a manual restart window, assigning someone to check the channel, or selecting a different operating approach. The right choice depends on whether you need a live camera feed, a continuous prerecorded loop, or simply a stream that is convenient to start from a phone. There is no need to call a setup fully automatic if a person still has to reopen the app after a crash.
Before committing, compare the operating options on the pricing page. When the file and channel are ready, start free — 24-hour trial, no card.
FAQ
Does Larix reconnect after the internet drops?
Softvelum documents reconnect settings for connection interruptions, including a reconnect timeout. Whether a retry succeeds depends on the app still running and the configured workflow. Check the current Larix FAQ and verify that YouTube receives the feed when connectivity returns.
Does Larix auto-start mean it recovers after a crash?
Not on the strength of the published auto-start descriptions alone. The store listings describe auto-start for automated workflows, but do not promise that Larix relaunches after a process crash and restores a YouTube broadcast. Ask Softvelum about your exact build and device before relying on that behaviour.
Does background streaming keep a Larix broadcast alive?
Softvelum documents Android background streaming until the app is explicitly closed, while its FAQ describes iOS background limitations that leave only audio available. Neither description promises recovery after the app process stops. Check the current platform guidance for your setup and test before an unattended run.
What should I do when Larix has crashed during a YouTube stream?
Reopen Larix, confirm the intended connection and stream details, and start the feed again. Then check YouTube Studio to verify that the correct stream is receiving it and follow the current YouTube live workflow. Keep a recovery note and a person available if the channel must be restored promptly.