Yes. Restream’s prerecorded Playlist feature lets you choose videos in your Restream library, arrange them in order, preview the sequence and schedule it as a broadcast to YouTube.
That is different from giving Restream a YouTube playlist URL and asking it to import the videos. The documented workflow uses files already in Restream or files you upload there, and a playlist broadcast is not the same thing as a native YouTube playlist.
Short answer: yes, with a Restream playlist
Restream supports a playlist made from prerecorded videos in its own library. You can select those videos, arrange the order before broadcast, preview the result and schedule the playlist for YouTube. Restream describes Upload & Stream as a way to schedule recorded videos to appear as live streams, so viewers encounter a live broadcast rather than a conventional YouTube playlist page.
The playlist has fixed boundaries: Restream’s Help Center says it can contain up to 40 video entries and run for up to 24 hours. The order can be changed before it goes live, not once the playlist is under way. If you need a sequence that continues past that limit, or needs editing while it is playing, plan for another workflow rather than assuming the playlist will keep extending itself.
It also does not currently loop as a playlist. Restream’s separate guidance for looping a single prerecorded video describes a different feature; do not treat that as a way to repeat a multi-video playlist indefinitely. For other approaches to recurring playback, compare the practical trade-offs in this guide to looping S3 videos to YouTube and the FFmpeg concat demuxer and playlist file.
Prepare videos in your Restream library
Start with the media, not the YouTube URL. From Restream’s home screen, choose Pre-recorded livestream, then Playlist. Select videos that are already in the Restream library, or upload the files you want to include, then continue to the playlist editor. The official playlist instructions describe selecting or uploading files before arranging them.
Before you upload, make a simple inventory: filename, intended position, duration, and any notes about the opening or ending. A devotional channel, for example, might place an opening welcome before a set of bhajans and a closing notice at the end. That checklist helps catch a wrongly named file before it is added to the broadcast sequence. It does not replace checking the rendered preview.
Think about the total duration as well as individual files. Restream’s playlist cap is 24 hours, and the account’s available library capacity and resolution may also matter. The Help Center lists the Marathon tier with a four-hour video library and maximum 1080p resolution, and the Media tier with a 12-hour library and maximum 4K resolution. Restream’s page was published on July 25, 2026; as listed on Restream’s site in September 2026, those tiers were $79 and $239 per month respectively. Confirm the current eligibility, capacity, price and resolution directly with Restream before buying, since plans can change.
Do not infer that the library allowance means a single playlist can exceed the playlist-specific duration limit. These are separate constraints: the account plan affects stored media and supported resolution, while the playlist itself has its own maximum duration and item count. Check that your files fit both before planning a long day of programming.
Create a prerecorded playlist
Once your files are available, select the items for this broadcast and continue to the playlist editor. Restream’s screen labels can change, so follow the current interface and Help Center rather than relying on an old screenshot. The important distinction is that you are assembling a broadcast from Restream-held videos, not constructing a YouTube playlist by pasting a YouTube page address.
You can add other material, such as a countdown or visual designs, where the interface offers it. These additions should serve a clear purpose. A short countdown can tell viewers that the programme is about to begin; a graphic can identify the channel or explain what is playing. Captions and QR codes may suit some broadcasts, but they are not substitutes for checking the video sequence and destination settings.
Choose the playlist items with the audience’s actual viewing pattern in mind. If a viewer joins after the broadcast starts, they will see whatever is currently playing, not necessarily the opening video. Put essential context in the live title, description or persistent visual design rather than relying only on an introduction that most late arrivals will miss. For a channel that uses a short test stream first, the prerecorded kirtan test checklist offers useful checks to adapt before making the real broadcast public.
Arrange videos in the desired order
The editor allows you to drag and drop videos into the sequence you want. Restream’s guide describes reordering before you preview or schedule the playlist. That makes it possible to put an introduction first, keep related material together, and end with a closing message rather than leaving the order to the order of upload.
Use a written running order before dragging files. A table is enough to reveal an accidental gap or a misplaced segment:
| Position | Example item | Check before scheduling |
|---|---|---|
| 1 | Welcome or opening slate | Does it identify the channel and programme? |
| 2 | Main programme segment | Is this the version you intended to use? |
| 3 | Supporting segment or notice | Does it belong here, rather than after the close? |
| 4 | Closing slate | Does it end cleanly without implying the playlist will repeat? |
The examples are a planning aid, not a required playlist length. Keep the actual list within Restream’s stated maximum of 40 videos and 24 hours. If you want an item to appear more than once, duplicate that file in the sequence before it goes live, while keeping within both limits. Restream says playlist looping is not currently supported, but repeating a selected item manually is different from an automatic, indefinite loop.
After arranging the list, read it from top to bottom and check each filename against your inventory. This catches common operational errors such as placing a sponsor notice in the middle, scheduling an outdated version, or ending with a test card. If you use Tamil or other subtitles embedded in the video, make sure they are legible in the rendered file; the guide to displaying Tamil subtitles on prerecorded streams covers the separate preparation concerns involved.
Treat the go-live boundary as a point after which the sequence is fixed. Restream says videos can be added, removed or rearranged before the playlist goes live; during playback, graphics and chat are the editable elements it identifies. Do not schedule a sequence that depends on last-minute file swaps or edits after the first segment has begun.
Preview the sequence
Preview the playlist before scheduling it. Check that the intended first and last videos appear in the right places, that the sequence follows your running order, and that any added countdown or graphics look as expected. A preview is an opportunity to spot a wrong selection or order; it is not proof that every viewer will have the same experience on YouTube.
Check the practical details that are easy to miss when you look only at the thumbnails. Confirm that audio is present at the beginning of each file, that a video does not open on a blank frame for an unexpectedly long time, and that its ending does not leave a silent or frozen-looking interval before the next item. If a transition matters to your channel, judge it in the preview rather than assuming that two adjacent files will feel like one continuous programme.
The destination matters too. Restream’s YouTube event guidance lists Playlist as a setup choice, and its YouTube streaming guide says the channel must have live streaming enabled. Confirm that the right YouTube channel is connected and selected, then check the event’s title, description, privacy setting and planned start time in the current interface. For a first broadcast, test the channel and the specific presentation on a private or otherwise suitable test event if that is appropriate for your setup.
A clean preview is particularly useful for channels where a mistake is costly to notice late. A local news loop might have an obsolete date card; a study station might include a section that was meant to remain unpublished. The preview cannot verify rights or guarantee YouTube approval, so check the current official YouTube requirements and your own permissions separately.
Schedule or start the YouTube broadcast
When the sequence is ready, schedule it and select YouTube as the destination. Restream documents scheduled file and playlist events as starting automatically at the appointed time. Its scheduling help also cautions that some destination platforms may require a manual start on that platform. Check the current event flow and do not assume every connected service behaves identically.
The broadcast is a prerecorded live event. In other words, the audience sees the videos sent as a live stream at the scheduled time; this does not turn the uploaded files into a native playlist on your YouTube channel. Restream’s Upload & Stream overview explains the prerecorded-streaming feature, while its YouTube Live Event guide covers destination setup.
Plan someone’s availability around the start even if the scheduled event is expected to begin automatically. That person can check the YouTube event, confirm that the audience sees the right content and respond if the destination asks for an action. Scheduling reduces the need to be at the computer to start the sequence, but it does not remove the need to verify the event and monitor the channel’s normal operating responsibilities.
If a single prerecorded file is all you need, compare that with a multi-file playlist before committing to this workflow. Restream’s looping guidance treats looping a standalone video separately from playlists; the distinction is useful if your aim is repeated ambience rather than a finite ordered programme. A continuous loop built another way may be a better fit, as discussed in this guide to keeping an FFmpeg radio broadcast running. Choose based on whether you need multiple files, manual ordering, a finite duration, or repeat behaviour.
What a YouTube playlist URL does not do here
The reviewed Restream instructions do not describe pasting a YouTube playlist URL to import its contents. The supported steps are to select videos in the Restream library or upload files, then arrange those files in the playlist editor. If you have already made a playlist on YouTube, do not assume its URL will create the same sequence in Restream.
Instead, identify the source files you have permission to use, obtain copies suitable for upload, and add those files to the Restream library. A link to a YouTube watch page or playlist is not a substitute for a media file in the documented workflow. The fact that a playlist is visible on YouTube does not establish that you can download, rebroadcast or otherwise reuse its videos; check the applicable rights and platform rules.
The result is a Restream-scheduled prerecorded broadcast to YouTube, not a newly created native YouTube playlist populated with the source videos. Viewers may see the broadcast as a live event and the resulting recording according to YouTube’s settings, but that is distinct from a playlist of separate uploads on your channel. Check the current YouTube event and archive behaviour in YouTube Studio before designing a workflow around how the recording will appear afterwards.
Before committing, compare the operating options on the pricing page. When the file and channel are ready, start free — 24-hour trial, no card.
FAQ
Can I paste a YouTube playlist URL into Restream?
The reviewed official instructions do not describe importing a playlist from a YouTube URL. They describe selecting videos held in Restream or uploading files, then arranging those items in a Restream playlist. Check Restream’s current documentation if its workflow changes.
Can I change the order after the broadcast starts?
Restream says you can change the order before the playlist goes live. Once it is running, its guidance identifies graphics and chat as editable, not the video sequence. Finalise and preview the order before the scheduled start.
Will the playlist repeat when it reaches the end?
Restream’s playlist guidance says playlists do not currently support looping. You can duplicate selected videos within the item limit to repeat them once or more in the arranged sequence, but that is not indefinite looping. Its single-video looping feature is a separate workflow.
Does the scheduled event become a YouTube playlist?
No. It is a prerecorded live broadcast sent to YouTube, not a native YouTube playlist assembled from separate video uploads. Check YouTube Studio’s current event and archive settings for how the broadcast and its recording will be displayed.