To change a YouTube stream’s title or thumbnail in LiveReacting, open the project’s Settings, edit Video Title in Primary Settings, or upload an image under Advanced Settings → Thumbnail, then save. The title can also be changed directly on YouTube while the stream is live or after it ends.
The image used for Create Live Announcement is a separate asset, not the YouTube thumbnail. If the stream is scheduled, check whether it is a one-time event or part of a multi-date or repeat schedule before editing, because the latter has additional restrictions.
Open the project Settings
Open the LiveReacting project for the stream you want to update, then select the gear icon to open Settings. Check that you have the intended project open before making changes: a saved project, a scheduled event, and an event already connected to YouTube may not represent the same upcoming broadcast.
LiveReacting’s YouTube settings guide describes the title and thumbnail controls in this project Settings panel. Interface labels can change over time, so if the guide and your screen differ, use the labels in the current interface and consult LiveReacting’s help material rather than assuming a similarly named control does the same job.
If you are editing a stream that has already been scheduled, first identify its schedule type. A one-time stream and a multi-date or repeat schedule do not have the same editing rules. The schedule guide and advanced scheduling guidance explain the distinction. This matters because a title change that appears to save in a project may not update every already-created scheduled event.
A useful starting check is to note the current title, where the stream is scheduled, and whether the image you intend to replace appears on the stream listing or only in an announcement. That makes it easier to tell whether you have updated the actual YouTube thumbnail or simply changed a promotional image.
Edit Video Title in Primary Settings
In Settings, find Primary Settings and edit the Video Title field. Enter the title you want viewers to see on the YouTube stream, then review it for spelling, date, language, and any wording that might be left over from a previous broadcast. Keep the change in this field focused on the title; the thumbnail is managed separately.
For example, if you run a daily devotional stream, change a title such as “Morning Bhajans — Monday” to the correct day’s wording before publishing or scheduling the relevant broadcast. A clear title helps viewers distinguish the current stream from older recordings or another scheduled session. It does not alter the video itself, the audio, or the image attached to an announcement.
The project field is the natural place to edit before a stream goes live, particularly if you are preparing a new event. But it is not the only route. LiveReacting’s settings guide also says the title can be modified directly on YouTube while the stream is live or after it has ended. If you only need to correct a typo after going live, YouTube may be the more direct place to make the correction.
Do not assume that typing into the field alone has completed the job. Save the settings, then verify the resulting public stream details in the appropriate place. For scheduled streams, use the schedule-specific instructions below before relying on the project’s saved state.
Upload an image under Advanced Settings → Thumbnail
To set the YouTube thumbnail, open Advanced Settings in the project Settings and use Thumbnail to upload the image. This is distinct from the Video Title field and from the announcement image control. Choose the image you intend viewers to see on the stream’s YouTube surface, rather than an image selected only for an announcement.
LiveReacting’s settings documentation identifies this separate Thumbnail control. It explains that the uploaded thumbnail is displayed when the stream is live or after it has been saved. The guide should be your reference for where to find the control; do not infer undocumented image dimensions, file limits, or automatic synchronisation behaviour from the fact that an upload is accepted.
Before uploading, make sure the image belongs to the correct stream and communicates what the broadcast contains. For a study stream, that may mean using the lesson or subject identity; for a local news loop, it may be the programme name and date. This is an editorial check, not a claim that a particular design guarantees discovery or performance.
If you are replacing an image, distinguish the old thumbnail from any image already used in an announcement. The image you see in a promotional post or event announcement might not be the image currently attached to the live stream. Replacing one does not prove that the other has changed. The controls have separate purposes, so treat them as separate edits and check each destination that matters to you.
If there is no Thumbnail field where expected, confirm that you are in the right project and have opened Advanced Settings. If the project is connected to an existing scheduled YouTube event, check the connection details before creating another event or assuming the project’s title is the one that YouTube currently displays.
Save the settings and handle scheduled streams
After changing the title or uploading the thumbnail, save the settings using the project’s save action. Saving makes the project edits persistent, but it is not a reason to assume that every existing scheduled YouTube event has been updated. Verify the public event after saving, especially where a schedule has already been created.
For a multi-date or repeat schedule, LiveReacting’s guidance says the title and description cannot be edited after scheduling. Its documented route is to cancel the scheduled streams, make the changes, and reschedule. This is a meaningful difference from editing an unscheduled project: cancelling and rebuilding the schedule can affect the planned events, so check the schedule before taking that step.
For changes to a repeating or multi-date project, look for Apply changes to all scheduled streams when you save or reschedule, if the same change should reach all remaining events. LiveReacting warns that without applying changes to all scheduled streams, edits may affect only the next stream, while the original scheduled snapshot may be restored for others. Make an explicit choice based on whether every remaining date should share the revised title and image or whether only the next broadcast should differ.
| Situation | Practical route | What to check |
|---|---|---|
| Project not yet scheduled | Edit Video Title and Thumbnail in Settings, then save | Confirm the intended title and image appear on the public stream details |
| One-time stream already live or ended | Change the title directly on YouTube if needed | Check the stream page after the edit |
| Multi-date or repeat schedule | Follow LiveReacting’s cancel, edit, and reschedule guidance for title changes | Decide whether to apply changes to all scheduled streams |
| Existing event scheduled on YouTube | Check the connection to that event before editing | Confirm which event and channel are selected |
The table is a decision aid, not a promise that a saved project edit immediately changes every YouTube event. When in doubt, use the current LiveReacting instructions for that schedule type, then inspect the event that viewers will actually open.
Change the title directly on YouTube
LiveReacting’s guide notes that you can modify a title directly on YouTube while the stream is live or after it has ended. This can be useful when you spot a mistake during a broadcast, or when you want to correct the title on a completed stream without returning to the LiveReacting project.
Open the relevant stream in the YouTube account that manages it and edit its details there. YouTube’s official help for managing live streams is the appropriate place to check current controls and account-specific behaviour. Confirm that you are editing the right event: a channel may have an active stream, a saved recording, and future scheduled streams with similar titles.
This direct edit addresses the YouTube title. It does not mean that a title changed in YouTube has also been written back into the LiveReacting project, nor that a later scheduled occurrence inherits it. If the project will be reused, update its Video Title as well where appropriate, then follow the schedule rules and verify the next public event separately.
For a live correction, favour a concise, accurate title over a hurried rewrite. A clear correction can fix an incorrect date or subject, but changing the words cannot alter the content of the stream itself. Review the title as a viewer would see it and make sure it describes the broadcast that is actually running.
Thumbnail versus announcement image
The YouTube thumbnail and the LiveReacting Create Live Announcement image are not the same control. LiveReacting describes the announcement image as appearing only as part of the announcement. The thumbnail is uploaded separately under Advanced Settings → Thumbnail and is used for the YouTube stream when it is live or after it has been saved.
That distinction explains a common source of confusion: you can update the announcement and still see an older thumbnail on the YouTube stream, or update the Thumbnail field without changing the image in an announcement that has already been created. Do not treat one image as a substitute for the other. If you need both, make both edits and inspect both destinations.
For example, a channel preparing a weekend music stream might make an announcement image with a date and a short invitation. The YouTube thumbnail can use a related visual, but it remains its own uploaded asset. A visual resemblance between the images does not make them the same file or establish that changes to one are copied to the other.
LiveReacting’s announcement and stream settings documentation describes the relevant controls. Use the current help page to confirm the labels and expected display purpose. The key operational rule remains simple: Thumbnail is the control for the YouTube thumbnail; Create Live Announcement is for the announcement image.
Verify the public stream details
After saving, check the public-facing stream or event on YouTube rather than relying only on what the LiveReacting project shows. Review the title and thumbnail where viewers will encounter them. If the stream is live, check the live event; if it has ended, check the saved stream. If it is upcoming, inspect the scheduled event that corresponds to the date you intended to change.
When a channel has more than one upcoming stream, match the event by date and content as well as title. This is particularly important after cancelling and rescheduling a multi-date or repeat schedule. Confirm that the correct event remains scheduled, that the title is the expected one, and that the thumbnail shown is the one you uploaded for that stream.
If you connected LiveReacting to an existing YouTube scheduled event, consult its guide to connecting an existing scheduled stream. LiveReacting says selecting an existing event under Advanced Settings → Connect to existing stream pulls information such as title and description from the channel. That is useful context when an event already exists, but it is not a reason to assume every later edit synchronises automatically. Check the actual selected event and the public result.
A simple verification record can prevent repeat mistakes: note the project name, which event you checked, and whether you changed the YouTube title, the project Video Title, the thumbnail, or the announcement image. For a recurring channel, this makes it easier to distinguish a one-off correction from a change intended for every remaining scheduled stream.
If your broader goal is a channel that keeps running while you are away from your desk, metadata is only one part of the preparation. A guide to restarting a scheduled 24/7 Punjabi music stream covers the separate planning question of keeping a recurring broadcast arranged. If a local setup has dropped unexpectedly, the troubleshooting guide for YouTube Live disconnects addresses another problem that changing a title or thumbnail will not solve.
For channels where the source is a recorded lesson, it can also help to plan the content separately from the stream listing. See the CBSE maths revision stream example for a recorded-content use case, or the guide to looping podcast episodes on YouTube Live for another format. These are different workflows; neither changes the LiveReacting settings path described here.
If you want the stream to keep running without leaving your own computer on, StreamNeo removes that particular operating burden by turning an uploaded video into a YouTube live stream that runs with your computer switched off and is monitored and restarted automatically if it drops. It does not replace the need to set the correct title and thumbnail in the tool or YouTube account you are using.
Before committing, compare the operating options on the pricing page. When the file and channel are ready, start free — 24-hour trial, no card.
FAQ
Where do I change the title in LiveReacting?
Open the project’s Settings and edit Video Title under Primary Settings, then save. LiveReacting also says you can change the title directly on YouTube while the stream is live or after it has ended. For a multi-date or repeat schedule, follow LiveReacting’s cancellation and rescheduling guidance before relying on a project edit.
Where do I upload the YouTube thumbnail?
Use Advanced Settings → Thumbnail in the LiveReacting project and save the settings. This is separate from the image used by Create Live Announcement. Check the stream or event on YouTube to confirm the thumbnail viewers will see.
Does changing the announcement image change the YouTube thumbnail?
No. LiveReacting describes the announcement image as part of the announcement and provides a separate Thumbnail control for the YouTube stream. If both need updating, change each separately and verify both destinations.
What if my stream is part of a repeat schedule?
LiveReacting says title and description edits are restricted after multi-date or repeat streams have been scheduled, and its documented guidance is to cancel, make changes, and reschedule. When editing a repeating schedule, choose Apply changes to all scheduled streams if the change should reach all remaining events. Check the current help instructions and verify the resulting YouTube events before the next broadcast.