To continuously play a Hindi songs playlist on YouTube through Streamlabs Desktop, play authorised tracks in a separate audio player, route that player’s sound into Desktop, and test the transitions in a private or unlisted stream. Do not assume Streamlabs Desktop has a built-in playlist loop: the current Desktop guidance reviewed here does not confirm a version-independent playlist source or loop control.
The reliable part of the setup is not simply making a playlist repeat. You also need permission for live and archived use, a capture route that works on your operating system, and a way to hear that the next song starts cleanly. The instructions below keep those jobs separate so you can find a failure before the audience does.
Check music rights before broadcasting
First confirm that you have the right to broadcast every track on YouTube. YouTube’s livestream terms and conditions require the necessary rights for use of live content on Google services worldwide, including music rights from artists, labels, publishers and other rights holders. Buying a song, crediting the singer, or finding it labelled “free” does not by itself grant those rights.
Make a track list before building the playlist. For each song, record where it came from, the licence or permission that covers it, any attribution requirement, and whether the permission covers both a live broadcast and the resulting archived video. Check whether monetisation, territories or a particular channel are restricted. A permission that covers personal listening or a social media post may not cover a continuous YouTube broadcast.
YouTube’s guide to finding safe music describes public-domain music and music used with permission as safe categories, and points creators towards options such as the Audio Library and original music. If you use a third-party catalogue, read its current terms rather than relying on a search result or a “royalty-free” label. That label does not tell you, on its own, what uses are allowed.
Live scanning can affect a stream even when you believe you have a licence. YouTube says live streams are scanned for third-party content; it may show a warning, replace the stream with a placeholder, or interrupt or terminate it if the material remains. A rights owner may need to add your channel to a Content ID allowlist for licensed music to be recognised during a live broadcast. Archived live video may also receive a claim after the broadcast ends. Keep written permission and allowlisting confirmation, where applicable, with your track records, and check YouTube’s current guidance before going live.
If you are still choosing a format, this distinction matters: a music playlist that repeats technically is not automatically a playlist you are entitled to stream. For a broader look at the content and format question, see whether you can stream the same song playlist 24/7 on YouTube. Rights and repeat behaviour are separate checks; passing one does not settle the other.
Choose an authorised audio source
There are two practical choices: use local files you have permission to broadcast, or use a catalogue whose licence expressly covers your intended live and archived uses. Local files give you control over the exact tracks and playlist order, but you are responsible for establishing and keeping evidence of each track’s rights. With a catalogue, verify that Hindi or other Indian-language tracks are actually available and that the licence applies to YouTube live use, your territory and any monetisation you plan to enable.
Compare sources by their rights, not just by sound quality or convenience. A useful checklist is shown here.
| Check | Questions to answer before you add a track |
|---|---|
| Live use | Does the permission cover a YouTube live broadcast, rather than only personal or offline playback? |
| Archived use | Can the stream remain available as a VOD after it ends? |
| Territory | Are the countries where your channel is available covered? |
| Monetisation | Does the permission allow your intended monetisation, if any? |
| Attribution | Must you credit the artist or follow a particular format? |
| Content ID | Must the rights owner allowlist your channel to avoid live interruptions? |
Keep the source file and the licence details together. If a rights owner has a process for allowlisting, follow it before your first broadcast and allow time to confirm the channel is covered. Do not assume that a message sent to a distributor or a licence purchase automatically updates YouTube’s Content ID system.
A ready-made application is not a substitute for this check. Streamlabs’ support materials mention music-related tools, but its notice says the Streamlabs Music app was discontinued in Desktop beginning 1 April 2025; do not plan a setup around installing that discontinued app. The available research does not establish Hindi catalogue coverage or current partner availability for other services, so verify any provider’s own current licence and catalogue before relying on it.
Set up a looping playlist in a player
Use an audio player that can repeat a playlist, such as VLC, rather than relying on an unverified Streamlabs Desktop playlist-loop feature. VideoLAN’s VLC Lua documentation exposes playlist loop and item repeat controls. That documentation supports the external-player approach, but it is not a step-by-step guide to every version’s graphical interface. Check the controls in the VLC version you have installed.
Prepare the playlist deliberately. Put only cleared tracks in it, give the files understandable names, and arrange them in the order you want listeners to hear. If you are using a folder of files, inspect the ordering: a player may sort by filename rather than by the order you expected. Keep a separate copy of the track list and rights notes so a future edit does not quietly introduce an uncleared song.
In the player, select playlist repeat or loop for the whole playlist, not repeat of the current item, if your aim is to hear all songs in sequence and then start again. The distinction matters: repeating one item can sound like the stream has stopped advancing even though the player is still active. Exact labels and behaviour can differ by version, so confirm the selected mode using a short test with two or more tracks.
Before opening Streamlabs Desktop, play the sequence locally. Listen for the end of one song and the beginning of the next, then let the playlist reach its end and confirm it returns to the beginning. Watch the player’s current-item indicator as well as listening. A visible change can help distinguish an actual transition from a long fade, silence within a track or a player that has paused.
Do not treat instructions for a different Streamlabs product as Desktop instructions. Streamlabs’ article about selecting multiple local tracks to form a queue is for Talk Studio; it does not establish that the same queue or loop workflow exists in Streamlabs Desktop. Desktop versions and available sources can vary. This guide uses VLC as the player and asks you to verify the route in your installed Desktop build.
Route player audio into Streamlabs Desktop
Once the player is looping correctly, make its audio audible to Streamlabs Desktop. Streamlabs’ Desktop getting-started guide covers adding sources and setting up audio capture. Its current quick-start guidance describes selecting Desktop Audio on Windows and matching it to the Windows default audio device. The names shown in your build may differ, so check the Audio Mixer rather than assuming that a source is already active.
On Windows, play a cleared track and look for movement on the relevant meter in Streamlabs Desktop’s Audio Mixer. If the meter moves when VLC plays, the desktop-audio route is probably capturing that sound. Mute other applications and sources during the check where practical. This makes it easier to tell whether the meter is responding to the playlist or to a notification, browser video or microphone.
On macOS, desktop audio is not automatically available to Streamlabs Desktop in the same way. Streamlabs says audio-routing software is needed to bring desktop sound in as a Mic/Aux source. The route therefore has two parts: configure the routing software to receive the player’s output, then select that routed device as the Mic/Aux input in Streamlabs Desktop. Follow the routing software’s current instructions and check its device selection in both applications; the exact setup depends on the software and macOS version.
In either operating system, avoid capturing the same player twice. If both Desktop Audio and a Mic/Aux route carry the same sound, the result may be louder or echo-like. Use the mixer meters and a test recording or private stream to identify which source carries the playlist, then mute any duplicate route. Keep your microphone separate if you need to speak over the music, and verify its level without letting it obscure the track transitions.
A local setup still depends on the computer staying on, the player remaining open and the audio route staying connected. If leaving the computer on is the problem you are trying to remove, StreamNeo turns an uploaded video into a YouTube live stream, so you do not have to keep the playlist player running locally. That addresses the always-on computer burden, but it does not grant music rights: you still need permission for the material and must check how your chosen content is handled.
Check desktop audio capture on macOS
Treat macOS routing as its own setup task, not as a minor variation of the Windows steps. Streamlabs’ Desktop guidance calls for audio-routing software to bring desktop audio into the broadcast as Mic/Aux. First install and configure the routing tool you choose according to its own current documentation, then set the player to output through the device that tool receives. Select the corresponding routed input in Streamlabs Desktop.
Use a simple signal test before you adjust stream settings. Start a cleared track at a moderate volume and watch the Mic/Aux meter. If it stays still, check the player’s output device, the routing software’s input and output selections, macOS permissions, and the selected Mic/Aux device in Desktop. Change one setting at a time and repeat the test; changing several devices at once makes it harder to identify where the route broke.
If the meter moves but the stream recording is silent, check that the source is not muted and that it is assigned to an output track used by your stream or recording. The interface can vary by Desktop version, so use the labels in your installed build and consult Streamlabs’ current guide where they differ. A meter proves that sound reached a mixer input; it does not by itself prove that the audience will hear it.
Listen with headphones while testing. Speakers can feed music back into a microphone and make it seem as if the routing is working when Desktop is actually capturing room sound. If you need a microphone, test it separately and keep it at a level that does not mask the playlist. For a different audio fault, the steps in how to fix audio delay while streaming may help you diagnose timing after you have confirmed that the route is capturing sound.
Verify transitions in a test stream
Before the public broadcast, make a private or unlisted test stream and check the actual output. YouTube recommends testing and monitoring stream quality; the YouTube Live Control Room help explains the live setup and monitoring process. Keep the test short enough to manage but long enough to hear a full track change and, if practical, the playlist returning to its first item.
Check three things separately: the player advances, Streamlabs captures the audio, and YouTube receives it. The player’s item indicator can confirm the first. Streamlabs’ mixer meter helps confirm the second. Listening to the test stream or its recording confirms the third. If you only check the player, you have not tested the broadcast route; if you only check a mixer meter, you have not confirmed what reached YouTube.
Listen through headphones on a second device or browser if possible. Check that the first song is not clipped at the start, the end of one track does not leave an unexpected silent gap, and the next track begins at an acceptable level. Then leave the test running long enough to observe whether the playlist returns to the beginning. Make a note of the player state and Desktop mixer state when something goes wrong.
Also check the stream status and any copyright notice in YouTube Studio. A clean audio transition does not mean a track has cleared rights checks. A stream may be scanned while it is live, and a VOD may receive a claim later. If a track triggers a warning or interruption, do not simply restart the same playlist and hope it clears; identify the material, confirm your permission and contact the rights owner about allowlisting where appropriate.
If your plan is to run a continuous video channel rather than a desktop audio session, compare the mechanics with YouTube Live playlist streaming versus looping a single video. For a music-only workflow, the key question remains whether both the audio route and repeat behaviour survive the transition in the setup you actually intend to use.
Troubleshoot silent or interrupted playback
When the stream is silent, work from the source towards YouTube. Confirm that the player is actively playing a cleared track and that its output device is correct. Check the relevant Streamlabs mixer meter next; if it does not move, the issue is in capture or routing, not YouTube’s live output. If the meter moves, make a short test recording or private stream and listen to that before changing the playlist.
When a song ends and the next does not start, check whether the player is paused, whether it is set to repeat the current item rather than the whole playlist, and whether the playlist contains the next file in the expected order. Test with local files that play correctly on their own. If you rearranged or renamed files after building the playlist, reload it and test the full sequence again.
If the mixer meter moves but the sound is too quiet, check the player’s volume and the mixer source level independently. Raise one at a time while monitoring a recording, rather than pushing both to maximum. If the sound is distorted, reduce the level at the player or mixer and test again. A meter that reacts is not evidence that levels are clean.
If audio drops after an operating-system or application change, re-check the selected output device in the player, the input device in the routing software if used, and the source selected in Desktop. Updates and device changes can alter defaults. On macOS in particular, a routed input may remain listed while no longer receiving the player’s sound, so use the mixer meter rather than relying on the device name alone.
If YouTube interrupts the stream or shows a copyright warning, treat it as a rights issue until you have evidence otherwise. Consult the notice, identify the track and review the permission and any allowlisting requirement. Do not assume that a technically correct loop, artist credit or purchase receipt resolves a Content ID match. For a visual streaming fault rather than an audio one, how to fix an OBS scene that goes black on a 24/7 YouTube stream covers a separate class of problems.
If the route works only while you are watching the desktop, note that this is a local-computer dependency: the player, capture route and Streamlabs Desktop must all remain available. Decide whether you are prepared to monitor that setup and recover it when a device or application changes. Do not promise yourself an unattended night until a realistic test has shown that the playlist advances and the stream remains audible under your actual operating conditions.
Before committing, compare the operating options on the pricing page. When the file and channel are ready, start free — 24-hour trial, no card.
FAQ
Can Streamlabs Desktop loop a Hindi songs playlist?
The official Desktop guidance reviewed for this article does not confirm a particular in-app playlist-loop source or version-independent controls. Use a player such as VLC for playlist repetition, route its audio into Desktop and verify the transition in a test stream.
How can I make the next song play after one ends?
Set the external player to repeat the whole playlist, rather than repeat the current item, and check the order of its tracks. Play through a transition locally, then confirm the next song is audible in a private or unlisted test stream.
Does Talk Studio’s music queue work in Desktop?
The queue instructions described in Streamlabs’ Talk Studio help are product-specific. They are not evidence that Streamlabs Desktop has the same queue or loop controls, so do not apply those steps to Desktop without confirmation in your installed version.
Can I use any Hindi song if I credit the artist?
No. Credit is not a substitute for permission to broadcast music on YouTube. Check that your rights cover live use and archived video, and confirm whether the rights owner requires your channel to be allowlisted.