When IRL Pro keeps disconnecting from YouTube, check the current stream URL and key first, then confirm the protocol and destination before changing network settings. A saved URL can stop working after a key is rotated or its region or protocol changes.
If those settings are current, test the upload connection under realistic conditions. The IRL Pro setup guide recommends SRT for mobile streaming affected by packet loss while moving; if SRT still falters, reduce bitrate and check where the broadcast drops out. None of these steps guarantees a stable connection, and the available guidance does not identify a fault with Indian broadband providers as a group.
Confirm the current stream URL and key
Start in YouTube Studio's Live Control Room, not in the encoder. Open the stream you intend to use and confirm that you are looking at the right scheduled event or live stream. Copy the current server URL and stream key from YouTube's encoder settings. YouTube's encoder setup instructions explain how those values are used: the server URL goes into the encoder's server field and the key into its stream-key field.
Now compare the values in IRL Pro with the current values in YouTube or the relay service you use. Do not assume a URL stored in an app is still valid because it worked last week. A rotated key, changed region or changed protocol can invalidate an earlier URL. If any of those settings changed, replace the entire published URL and enter the matching key again rather than editing only part of an old address.
Treat the URL and key as a pair that belongs to a specific destination and configuration. A copied key from another event, an extra space, a truncated URL or an old saved profile can look like a network problem in the field. If you have more than one stream profile, label them by destination and use the one that matches the current YouTube event. Never share a stream key publicly; if you think it has been exposed, reset it in YouTube and update the encoder.
If you are using a relay between IRL Pro and YouTube, check its current published connection details as well. The IRL Pro setup guidance from Enhanced IRL describes a workflow in which a region or protocol change, or a key rotation, means you must use the newly published URL. Follow the exact field format that your chosen relay specifies. A YouTube key and a relay's ingest URL are not interchangeable simply because both appear in the same workflow.
For a scheduled YouTube stream, connection and event controls are separate. You may see a preview arrive in Live Control Room without the public broadcast having started. YouTube's instructions say to wait for the preview and select Go live when required by the event settings. Auto-start and auto-stop settings can affect how the event begins or ends; they do not repair an invalid encoder URL or transport connection.
Check protocol and destination settings
Once the credentials match, verify the selected protocol at both ends of the path. IRL Pro's cited setup guide describes RTMP and SRT options, but the relay or destination must also accept the selected protocol. Check the service's current instructions rather than assuming that every URL works with either option.
YouTube's current help recommends RTMPS for encrypted ingestion. That does not establish that every IRL Pro and relay combination supports RTMPS, so confirm support in the exact app and service configuration before switching. If the documented path supports only RTMP or SRT, use the protocol the path actually accepts and investigate any mismatch before testing signal strength.
A change from RTMP to SRT is not simply a cosmetic switch. It may require a different URL or a different destination entry, depending on the service. If you toggle the protocol but leave the old URL in place, you can create a failure that looks like a poor mobile connection. Copy the newly generated connection information after a protocol change and update every relevant field in IRL Pro.
Keep the comparison focused on what your route can handle. RTMP may be the familiar, documented option for a fixed, steady connection. The IRL Pro-specific guide advises SRT when a single mobile connection loses packets while moving. The useful distinction is not that one protocol is universally best; it is whether your destination supports it and whether it addresses the kind of interruption you actually see.
For a wider explanation of how YouTube's ingest choices behave, see our guide to YouTube primary and backup ingest URLs. A backup URL is not a second internet connection, and selecting one does not combine links or correct a stale key. Confirm the primary destination and current credentials before changing the ingest endpoint.
Inspect the single-connection uplink
With credentials and protocol checked, look at what happens on the connection that carries the stream. The cited Enhanced IRL configuration for IRL Pro uses a single connection. Do not assume that Android is combining mobile data and Wi-Fi, or two SIMs, simply because both are available on the phone. A bonded setup requires an app and service configuration designed for bonding; it is distinct from switching between available networks.
This matters especially when you walk. At home, Wi-Fi or fixed broadband may appear adequate while the phone is stationary. Moving outdoors changes the path and can introduce brief loss or variation in upload capacity. A speed test taken beside the router, or a download result on the phone, does not establish that the upload can sustain your chosen video bitrate along the route.
YouTube advises using enough outbound bandwidth for the selected bitrate, leaving headroom and testing in conditions similar to the actual broadcast. Think in terms of sustained upload, not the best number briefly displayed by a test. If your programme includes walking between indoor and outdoor areas, include those transitions in a private or unlisted test where practical. Record where and when the preview or broadcast breaks up, and whether the phone was moving, stationary, on Wi-Fi or on mobile data.
Do not assign a drop to an Indian ISP or mobile carrier without evidence. The reviewed material does not document a particular provider, city or carrier fault. Broadband can mean fibre, fixed wireless, a Wi-Fi router or cellular data, and each can fail at a different point. If you need to report a pattern, note the location, access type, device, time and whether other services also lost connectivity; those observations are more useful than a general claim that a network is unreliable.
If you are streaming from home on a computer rather than directly from the phone, power interruptions can resemble network problems. Our UPS guide for a PC running a 24/7 YouTube stream in India covers that different failure mode. For an IRL Pro phone stream, first establish whether the encoder is still connected and whether the uplink itself changed.
Try SRT for packet loss while moving
If the URL, key and destination are correct, and the issue appears during movement or brief packet loss, test SRT if your full route supports it. The IRL Pro setup guide recommends SRT for a single mobile connection on the move because its guide describes it as more tolerant of packet loss than RTMP. That is guidance for the documented setup, not a promise that SRT prevents disconnects or fixes a weak uplink.
Change one setting at a time. Confirm SRT is supported by the relay and destination, obtain the matching current URL, and update the corresponding IRL Pro profile. Then repeat a short test on the same route and with similar movement. If you change protocol, bitrate and network at once, a successful test will not tell you which change mattered, and a failed one will be harder to diagnose.
Keep a small test record: protocol, selected bitrate, connection type, whether you were walking or stationary, and the time of any interruption. It need not be elaborate. A note such as “SRT, same route, upload on mobile data, preview stopped near the junction” is more actionable than “stream drops outside”. Avoid exposing the full key in screenshots or support messages.
Understand the limits of a single connection. If your requirement is to combine cellular links or cellular and Wi-Fi for resilience, verify that the specific encoder and relay support a bonded setup. The cited IRL Pro guide distinguishes its single-connection workflow from SRTLA bonding and points to setups involving Moblin or BELABOX for that purpose. The IRL Pro website also mentions SRTLA as a feature, so capabilities depend on the exact app version and service path; confirm the current documentation rather than inferring bonding from a protocol label.
SRT is most relevant when your observed failure fits packet loss in a moving connection and the destination supports it. If the stream fails while stationary, or Live Control Room never receives any preview, revisit the credentials and destination. Changing protocols cannot compensate for a wrong key, an inactive event or an unsupported endpoint.
Lower bitrate if SRT still falters
If SRT is already selected or does not resolve the interruptions, reduce the video bitrate and test again. The point is to bring the stream's demand within what the connection can sustain with some headroom. A lower setting can reduce the load, but it does not guarantee stability; severe or repeated upload interruptions can still stop the stream.
YouTube's live encoder settings guidance includes H.264 recommendations of 14 Mbps for 1080p30 and 8 Mbps for 720p30, with minimums of 5 Mbps and 3 Mbps respectively. These are platform encoder figures, not a diagnosis of your connection and not a promise that an Indian mobile or home uplink can sustain them. Choose a setting based on a real upload test and field test, not merely on the resolution you would prefer to send.
Reduce bitrate in a controlled way and repeat the same kind of test. If the preview holds longer or the stream remains intact on the same route, the previous load may have been too demanding for the connection in those conditions. If the failure is unchanged, check for a destination, key, app or network interruption instead of lowering the figure indefinitely. Where the app permits it, reducing resolution or frame rate can also reduce the amount of data being sent, though it changes the picture viewers receive.
Do not treat a plan cap from a relay vendor as a recommended bitrate for every user. A service's limit describes what its own plan accepts, while YouTube's encoder recommendations describe platform guidance; neither tells you what your particular uplink sustains. Vendor caps and procedures can change, so check the current service page before applying them. The practical test is whether the chosen settings remain within both destination requirements and the connection's demonstrated capacity.
When you compare outcomes, preserve the other settings. Keep the same route, device, protocol and destination while changing bitrate, then note whether the failure point moves. This takes longer than changing everything at once, but it prevents guesswork. For a separate kind of continuous broadcast built from recorded material, our guide to looping multiple MP4 files on YouTube explains why a pre-recorded loop has different operational demands from a mobile IRL stream.
Locate the failure in YouTube or relay dashboards
A disconnect report is more useful when you know which link stopped. Look at IRL Pro's status or error message, the relay's chain or status view if you use one, and YouTube's Live Control Room preview and stream health information. Establish whether the phone stopped sending, the relay stopped receiving or forwarding, or YouTube stopped receiving the feed. A visible preview in YouTube means the path reached YouTube at that moment; it does not by itself prove the stream is publicly live.
If the relay has no incoming feed, focus on IRL Pro's URL, key, protocol and uplink. If the relay receives the feed but does not forward it, inspect relay status, subscription state and output configuration. If YouTube reports no incoming signal while the relay says it is forwarding, check the YouTube destination URL and key. These are working hypotheses, not definitive diagnoses; use the actual status messages and timestamps to confirm them.
Where the service's documented workflow allows it, try a short test from another phone encoder using the same URL and key. Enhanced IRL's troubleshooting guidance suggests this as a way to separate an IRL Pro configuration issue from a key or subscription issue. If the test reaches the expected destination, examine the IRL Pro profile and app behaviour. If it does not, revisit the credentials, destination and service status. Do not leave a test running publicly without checking the event and audience implications.
Keep the YouTube event controls in view. A scheduled stream may receive encoder input and show a preview but still wait for you to press Go live. Conversely, an event can be live even as the encoder feed is interrupted. Check the Live Control Room's state and messages before concluding that an ingest disconnect and an event-start setting are the same failure.
Before contacting support, capture the exact error text, app and Android version, protocol, bitrate, connection type, whether it happened stationary or while moving, and the time it occurred. Include whether the same URL worked from another encoder and whether the relay showed input and output. Redact stream keys from screenshots. This information gives app, relay or YouTube support something specific to investigate and helps avoid repeating tests that have already ruled out a cause.
For a 24/7 channel based on an uploaded file rather than a phone broadcasting on the move, the failure pattern is different: the encoder process, power or source file may be the weak link. StreamNeo is useful in that separate situation because it removes the need to keep a computer running to turn an uploaded video into a continuous YouTube broadcast, rather than solving a mobile IRL Pro uplink issue.
Before committing, compare the operating options on the pricing page. When the file and channel are ready, start free — 24-hour trial, no card.
FAQ
Why does IRL Pro disconnect when I start walking?
Movement can expose variation or packet loss on a single mobile connection, but that is not the only possible cause. Confirm the URL, key and destination first, then test SRT if your full path supports it and repeat the test on the same route. Record whether the failure happens in the same place or at the same point in the route.
Should I use RTMP or SRT with IRL Pro?
Use the protocol that your app, relay and destination all support. The cited IRL Pro guide recommends SRT for a single mobile connection affected by packet loss while moving, but it does not guarantee a disconnect-free stream. If your current endpoint requires another protocol, first confirm whether there is a compatible SRT destination.
What bitrate should I use on mobile data?
There is no single bitrate that suits every device, route or mobile connection. YouTube's encoder recommendations are platform guidance, not a measurement of your upload capacity. Test with movement similar to the broadcast, leave headroom and lower bitrate if SRT still falters; verify the result rather than assuming a lower setting guarantees stability.
How do I tell whether YouTube or IRL Pro is dropping the stream?
Compare IRL Pro's status with the relay's incoming and outgoing status and YouTube Live Control Room's preview or health messages. Those views can help locate the break between encoder, relay and destination. Save timestamps and exact errors, and keep keys private when sharing evidence with support.