If an end screen appears between items in what you call a YouTube loop stream, first work out whether it is a YouTube-added overlay or an ending already present in the footage. Remove YouTube end-screen elements in Studio; for a continuous live feed, edit the source clips before they go out.
The distinction matters because YouTube Studio edits a video or archive, while a live broadcast is a feed sent to YouTube. Repeating a video in a player does not edit that feed or remove an outro baked into a clip.
Identify which kind of loop stream you mean
“Loop stream” can describe several different things: a viewer replaying one video, a playlist repeating in an embedded player, an archived live video, or a channel sending a continuous sequence of clips as a live broadcast. The same phrase, “end screen”, can also mean YouTube’s clickable overlay or a visual card that is part of the video itself. Those cases call for different fixes.
Start by asking three questions: who controls the thing on screen, where does it exist, and what is playing? If you own the video and see clickable recommendations or a subscribe element near the end, it may be a creator-added YouTube end screen. If you see a logo, “subscribe” animation, black pause, or credits as part of the picture, that is probably in the footage. If you are a viewer rather than the channel owner, you cannot change the creator’s Studio settings.
| What you are seeing | Where it lives | Where to start |
|---|---|---|
| Clickable video or channel elements at a video’s end | YouTube’s end-screen layer | Check the video’s End screen editor in Studio |
| An outro, title card, or blank tail visible in the picture | The source video pixels | Trim or replace the source clip |
| A viewer-facing end screen on an archived live stream | Potentially the archive’s Studio settings | Open that specific archive in Studio and check its editor |
| An end card between clips in a live broadcast | The clips or sequence being sent as the feed | Inspect the source clips and the sequence |
| An end screen seen while watching somebody else’s video | The video’s creator settings | Use Hide if it is available for that viewing session |
A useful test is to pause or scrub to the moment in question. If the item looks like a separate clickable recommendation or subscribe prompt, inspect Studio. If it moves with the picture, remains part of the image when you watch the original clip outside the live stream, or appears during a transition, inspect the footage and playlist order instead.
These distinctions are relevant when you plan a clip sequence too. For example, a guide to scheduling different videos on a 24/7 YouTube livestream helps with the order and rotation of a broadcast, but sequence planning cannot remove a card already recorded into an individual clip.
Remove end-screen elements in YouTube Studio
If you own the video and the elements are YouTube overlays, use Studio to remove them. Open YouTube Studio, choose Content, and select the relevant video. Open Editor, choose End screen, then use the delete control for each unwanted element and save the edit. The labels or layout may vary as YouTube updates Studio, so follow the current controls shown for that video.
YouTube’s end-screen Help page explains the editor and eligibility. Its documented end-screen window is the last 5–20 seconds of an eligible video, and the video must be at least 25 seconds long. Treat those as YouTube’s stated conditions, not a guarantee that every upload or live archive will expose the same editor controls.
Delete only what you mean to remove. A video element, playlist recommendation, or subscribe prompt may be useful on a normal upload but unwanted on a looping archive. You can remove one element and leave another, then review the result. If the whole end-screen section is unsuitable, remove all of its elements rather than assuming that changing the video title, thumbnail, or playback setting will affect the overlay.
The editor applies to the selected video or archive, not automatically to every item on your channel. If the same problem occurs on several uploads, check each one. Keep a local source copy before making edits, particularly if you are also changing the footage itself. YouTube’s trim guidance describes edits to eligible videos; check the current interface and eligibility before relying on it.
A live archive deserves a separate check. Open the specific stream under Content and see whether Studio presents an End screen option for it. YouTube’s live archive guidance covers managing archives, but it does not promise that every archive will have the same editor options as a regular uploaded video. If there is no End screen control, do not assume you have missed a universal switch; the archive may not offer that editing path.
Adjust when end-screen elements appear
Deleting an element is not the only possibility. If you want to keep a prompt on an ordinary video but prevent it from covering the moment viewers care about, use the timing controls in the End screen editor. YouTube allows end-screen elements within the final 5–20 seconds of an eligible video. Move them later in that window, or remove them if no timing works for the loop you are creating.
This helps when an archive has a short closing moment that you want viewers to see clearly, or when the end screen appears too early over the final line of a prayer, song, or announcement. It does not create a seamless transition into another clip. The elements still belong to the selected video and appear in its end-screen window; the next item in a separate live sequence is not being controlled by that Studio timing setting.
Preview the timing, then view the saved video in the same context where you noticed the issue. YouTube notes that end screens may display differently across viewing contexts. A desktop preview is not enough evidence that the result looks the same on a television, mobile screen, or embedded player. If the element is only a problem for a particular archive, change that archive rather than making a channel-wide assumption.
If it is a live clip feed, inspect the source clips
For a live broadcast assembled from prerecorded clips, the clean fix is usually upstream of YouTube. Inspect the files that enter your playlist or sequence. If each clip ends with a branded card, silence, black frames, credits, or a fade to a still image, those moments are part of the clip itself. Remove or shorten them in your editing workflow, then replace the versions used by the feed.
Do not confuse an embedded player setting with the output of a live encoder. Google’s YouTube player parameters document looping a single embedded video or an embedded playlist. YouTube’s live-streaming tips describe preparing and sending live content with an encoder. Neither source documents a setting that strips the ending from each clip in a creator’s continuous broadcast.
A practical review is to play each source clip from its last section into the next clip, not just inspect the first few seconds. Note where the image goes black, where an end card appears, and whether the audio cuts or fades. Then trim or rebuild those sections in the source project and check the transition in the exact sequence that will be broadcast. If the sequence has many clips, keep a simple record of which files have been checked so an old version is not reintroduced later.
For a devotional channel, for instance, a clip may have a few seconds of silence and a static “subscribe” card after the chant. If the live sequence repeats that file, the card will return each time the clip plays. Removing a YouTube Studio end-screen element cannot alter those recorded frames. A 24/7 Om chanting stream guide can help with the broader broadcast setup, but the source clips still need their own content review.
If your channel uses a player playlist rather than a live broadcast, say so when you diagnose the issue. You may be able to change the playlist or the embedded player’s looping behaviour, but that is not the same as editing the underlying videos or a separate live feed. For a clip-based live stream, the source sequence is the place to remove repeated visual endings.
Why the player loop setting is not a live-feed control
A loop option can sound like a master switch, but the documented YouTube player loop behaviour concerns playback in that player. The developer documentation describes repeating an individual embedded video or a playlist in an embedded player. It does not describe controlling an encoder-sent live broadcast or suppressing creator-added end-screen elements across the clips in that broadcast.
That is why toggling a player loop setting is unlikely to fix a transition you see on a channel’s continuous live stream. The live feed arrives as content being sent to YouTube; the player presents that content to viewers. A visual outro within the feed remains visible because it was included in the clip or sequence. A Studio end-screen overlay belongs to a particular video or archive. Neither problem is addressed by changing a setting intended for embedded playback.
Likewise, DVR is not an end-screen switch. YouTube’s DVR help page describes pausing and seeking during a live stream. Those controls affect how a viewer navigates the live programme; they do not edit its images, remove overlays from its archive, or rewrite the sequence being sent.
If you are the viewer of somebody else’s video, YouTube has described a Hide control for dismissing an end screen on the current video. YouTube Creator Liaison Rene Ritchie explained that Hide dismisses it for “that video, that time”, not for every video permanently. The official YouTube post explains the limitation. Use it as a viewing workaround where available, not as a channel owner’s production fix.
Test the edited video or feed
After changing an end screen or replacing source footage, test the actual item that caused the complaint. For a Studio edit, save and open the video in its normal viewing context. Check the ending, including whether any unwanted clickable element remains and whether the final section is still covered. Do not treat an editor preview as proof that every device will show precisely the same presentation.
For a live feed, run a private or otherwise suitable test workflow if available to your channel, and inspect a transition from one clip into the next. Confirm both picture and sound: an outro may be gone while a long silent tail remains. Also make sure the broadcast is using the revised file, not a cached, duplicated, or older copy with the same name. If you maintain a playlist, update the entry that actually feeds the broadcast.
When the content is an archive, check both the archive and the live source separately. A Studio change to an archive does not retroactively modify the clip files used in a later broadcast. Likewise, replacing files in a live sequence does not necessarily change an already-published archive. Keep those workflows distinct in your notes so a successful edit in one place is not mistaken for a fix everywhere.
If the cause remains unclear, capture the moment and ask whether the display is clickable or part of the image. That is more useful than reporting only that “the loop shows an end screen”. It tells you whether to investigate the Studio End screen editor, the clip’s last frames, or the viewer’s playback controls.
For a long-running prerecorded playlist, the repeated operational burden is often keeping the right clip version in the sequence and checking that the broadcast continues after updates. StreamNeo can remove the need to leave your own computer running for that 24/7 YouTube broadcast, but it does not remove endings already present in the uploaded clips; prepare the content before it enters the feed. If you are comparing a local encoder workflow with other ways to run a channel, this OBS and FFmpeg comparison is relevant to the operating choice, not a substitute for editing the source footage.
Before committing, compare the operating options on the pricing page. When the file and channel are ready, start free — 24-hour trial, no card.
FAQ
Can I turn off every end screen on my YouTube channel?
You can remove creator-added end-screen elements from videos you control using the End screen editor in Studio, where that editor is available. Check videos individually; the control does not remove visual outros that are part of the footage, and not every live archive is guaranteed to expose the same editor.
Why does an end card still appear after I removed the end screen?
The card may be part of the video image rather than a YouTube element. Play the source clip around its ending; if the card appears there, edit or replace the source file and update the live sequence.
Does looping a video in the YouTube player remove an end screen between live clips?
No. The documented player loop setting repeats a video or playlist in an embedded player. It is not a control for the playout of a separate continuous live broadcast.
Can I hide end screens when watching someone else’s video?
Use YouTube’s Hide control if it is available in your viewing context. It is a per-video, per-viewing workaround, not a permanent preference that removes end screens everywhere.