XSplit Broadcaster’s Video Playlist source lets you add multiple video files to a scene, and XSplit describes it as supporting continuous playback. The documented path is Add source > Scene Widgets > Video Playlist; XSplit’s setup article does not identify a specific loop or repeat control by name.
You configure the playlist and the YouTube broadcast as separate parts of the job. Follow the source steps below, then set up YouTube as the output, test with representative content, and do not assume that continuous playback means an uninterrupted broadcast, automatic recovery, or a complete archive.
Add a Video Playlist source to the scene
In XSplit Broadcaster, open the scene you want to use and choose Add source > Scene Widgets > Video Playlist. This adds a playlist source to the scene, rather than sending anything to YouTube by itself. XSplit describes a scene as a collection of sources, so the playlist can sit alongside other material you need in the composition.
If you have not built a scene before, XSplit’s sources menu introduction explains the role of sources and how they are added. A scene might contain only the playlist, or it might include a logo, a background, or other visual elements. Keep the first pass simple: confirm the video is visible and that the scene is composed as intended before adding refinements.
A source is not the same thing as an output. The playlist determines what XSplit presents within the scene; a broadcast output determines where that scene is sent. Keeping these steps distinct makes troubleshooting clearer. If the video does not appear in the scene, inspect the source and its files first. If the scene looks right but is absent from the live event, inspect the broadcast connection and event state.
For a devotional channel, for example, the playlist might hold a sequence of bhajan videos, while the scene adds a channel mark in a corner. A study channel might use a single ambience file with a simple visual. These are content decisions, not special XSplit settings. Choose files you have permission to use and check that their picture and sound suit an ongoing broadcast.
Add video files to the playlist
Open the playlist source properties and use Add to choose the video files you want included. Select the files from your computer, confirm the selection, and use OK to save the source. The XSplit Video Playlist guide describes this basic workflow: create the source, add videos, and save.
Before loading a long sequence, make a small test playlist. Confirm that each chosen item is the right file, has the expected audio, and can play in your scene. A filename such as morning-bhajan-final.mp4 is useful only if it really points to the version you intend to broadcast. Check content outside the live event so that a mistaken export, blank section, or unrelated clip does not become the first thing viewers hear or see.
The playlist source is a way to organise multiple videos in one scene. It does not settle every operational question about the media. Think through whether the clips have compatible picture dimensions, whether their sound levels are broadly consistent, and whether any transition between them will be acceptable to a viewer. If a channel depends on spoken introductions or scheduled segments, a simple sequence of files may not produce the editorial timing you need.
For a local setup, the files need to remain available to the computer running XSplit. A playlist pointing to moved or unavailable files is not a durable unattended workflow. If you want to avoid keeping media on the local machine, compare that distinction with streaming music without storing files locally. That is a different operating model from loading local video files into XSplit, and the right choice depends on how much scene control you need and who will keep the media accessible.
Save the source and check the scene
After adding the files, save the playlist source with OK. Return to the scene and check that the source appears as expected. Play through enough of the content to verify that the picture is framed correctly and that sound is reaching the intended output. XSplit’s general image, video and audio source guidance is useful when the issue is about how a source is displayed or handled, rather than the YouTube connection.
Treat saving as the point at which you preserve the source configuration, not as proof that every file will play correctly for an extended session. A short check can catch a missing file or a silent clip, but it cannot establish behaviour across a night or across every later transition. Watch the point where one file ends and another begins. If the result has a gap, abrupt sound change, or unwanted black frame, revise the media or the presentation before scheduling an unattended broadcast.
If you add overlays, make sure they do not obscure important parts of the video. A title bar that works over one clip may cover a face or devotional image in another. The article on overlay tools for YouTube compares the general role of overlays; whatever you use, preview it with the actual playlist rather than judging it on an empty scene. Remove elements that are decorative but make the content harder to watch.
Keep a known-good version of the scene and playlist before making substantial changes. That practical precaution gives you a route back if a new file or overlay introduces a problem. It is also worth checking that you selected the intended scene before you configure the broadcast; a correctly configured playlist in a different scene will not help if another scene is sent to the event.
What XSplit documents about continuous playback
XSplit describes Video Playlist as a way to create a playlist of multiple videos with continuous playback and other options for controlling how videos play in a scene. That is the basis for using the source when you want a sequence to keep moving through its content. It is not evidence that a particular current version has a named checkbox, or that every detail of its behaviour is specified by the retrieved setup guide.
The setup article does not show the detailed playlist-properties panel or state the exact label of a loop or repeat control. For that reason, do not follow instructions elsewhere that depend on a guessed label without checking the version in front of you. The documented steps establish where to add the source, how to add files, and how to save. They do not verify a particular version’s settings or promise gapless playback.
If your installed version exposes additional playlist options, read their descriptions in context and confirm the result with a test. A control that affects playback order, for example, would not necessarily control whether a finished list starts again. Do not infer one behaviour from another. XSplit’s wording supports the general description of continuous playback, while the exact visible controls and resulting transitions should be confirmed in your own setup.
There is also a difference between content repeating and a broadcast staying live. A playlist can be intended to continue playing while the computer, XSplit, network connection, and YouTube event are all still operating. A crash, power loss, disconnection, or event ending is a separate failure. If you are evaluating a local PC workflow for a 24/7 music stream in India, include the computer and connection in your plan, not only the playlist.
Configure YouTube Live as a separate output
Once the scene is ready, configure the YouTube broadcast output separately. XSplit’s guide to streaming to YouTube Live directs you to select a YouTube output from the Broadcast menu and fill in the broadcast details before starting. Follow the current prompts for the event you intend to run; playlist settings do not create or configure the YouTube event.
If your encoder workflow requires a generic destination rather than a direct YouTube selection, YouTube’s encoder setup guidance says to use the stream URL and stream key supplied for the event. Treat the key as a credential: do not show it in a public screenshot, paste it into public instructions, or share it with someone who should not be able to send video to your channel. Use the active values shown in YouTube Live Control Room rather than relying on an old note.
Check the event title, visibility, and other details in the YouTube workflow before going live. The appropriate choice depends on whether you are testing privately, scheduling a public event, or running an established channel. YouTube policies and interface wording can change, so check the current official guidance for the event you are preparing rather than treating an old setup as a guarantee.
XSplit’s instructions for a scheduled stream also discuss Manual Transition. That concerns whether you must make a final Go Live action in YouTube Studio after starting the XSplit output. It is about the event’s start sequence, not an automatic restart or recovery feature if the broadcast later drops. Do not confuse a successful hand-off into a scheduled event with an always-on safeguard.
If you are still choosing between operating locally and hosting a stream elsewhere, compare the practical differences: local scene and live control, responsibility for the running computer, and how you will respond when something needs attention. StreamNeo removes the need to leave your own computer running for a file-based YouTube broadcast, which addresses the specific burden of keeping a local machine on overnight; it does not change the separate need to prepare the media and YouTube channel correctly.
Start the broadcast and verify playback
Before you leave a stream unattended, run a representative test with both moving video and audio. YouTube’s live streaming troubleshooting and health guidance recommends testing content representative of the planned stream and monitoring stream health and messages. Do not use a silent still image as your only test if the real playlist contains music, speech, or motion.
Watch the YouTube event preview and confirm that the expected scene arrives. Listen to the audio on a device other than the XSplit computer if possible, because a local monitor can sound correct while the audience output is muted or routed differently. Check the transition between playlist items, not only the first few seconds of the first clip. A channel with a long sequence should test representative points, including a transition that matters to its programming.
Check that the upload connection can sustain the chosen output settings with room for ordinary variation. Use guidance appropriate to your resolution and content; the YouTube bitrate guide for 1080p in India is a starting point for that specific context, not a substitute for checking your actual connection. A speed result at one moment does not prove stability throughout a long broadcast. Review YouTube’s stream health messages while testing and respond to warnings before leaving the event unattended.
A 24/7-style output does not mean YouTube will preserve one uninterrupted replay of the entire period. YouTube states that streams under 12 hours are automatically archived; the cited guidance does not promise that a longer session will be available as one complete replay. If you need a record of all content, plan a separate recording or archive process and verify it independently. Do not assume that a live event’s duration and its saved replay are identical.
After starting, verify that the event is actually live where intended. For a scheduled broadcast, complete any required final action in YouTube Studio. Then leave the test running long enough to observe normal playback and a playlist transition. This helps distinguish a configuration that starts correctly from one that continues to behave as expected after the opening moment.
What the setup guide does not specify
The XSplit setup page does not expose the detailed properties panel or identify a current loop-control label. It also does not verify a particular installed version or establish that transitions are gapless. If the exact repeat behaviour matters to your channel, inspect your installed XSplit version and test the playlist before relying on it overnight.
The guide also does not say that a playlist source automatically handles a power failure, network outage, software crash, or YouTube event interruption. Those are different from playback reaching the end of its list. A robust plan considers the local computer, power, connection, stream health, and who will notice a problem. In a local workflow, you remain responsible for the machine and for checking the event.
Nor does the scheduled-stream transition setting establish recovery behaviour. It tells you something about starting a scheduled event, not whether a dropped encoder will reconnect or resume the same playlist position. Treat restart and recovery as questions to verify separately in the documentation for the tools you choose. Do not infer them from the presence of continuous-playback wording.
Finally, the source setup does not resolve rights, monetisation, or content policy questions. A video that plays in a scene is not necessarily appropriate for rebroadcast. Check permissions and the current YouTube rules for your material; no playlist setting can guarantee approval or protect a channel from a rights claim. If your concern is originality and repetition, the practical questions in avoiding duplicate-content problems with a 24/7 stream are relevant alongside the technical setup.
Before committing, compare the operating options on the pricing page. When the file and channel are ready, start free — 24-hour trial, no card.
FAQ
How do I loop a video playlist in XSplit?
Add a Video Playlist source through Add source > Scene Widgets > Video Playlist, add your files, and save the source with OK. XSplit describes the source as supporting continuous playback, but its setup article does not name a specific loop or repeat control. Check and test the options in your installed version rather than relying on a guessed label.
Can XSplit Broadcaster play videos continuously?
XSplit describes its Video Playlist source as providing continuous playback of multiple videos in a scene. The setup article does not establish exact transition behaviour or guarantee uninterrupted output. Test the files and transitions you intend to use before leaving a stream unattended.
Does a continuous playlist keep YouTube live all day?
No. Continuous playback describes the playlist, while a live broadcast also depends on XSplit, the computer, the connection, and the YouTube event remaining active. Test stream health and plan how you will detect or respond to an interruption.
Will YouTube archive a 24/7 stream as one replay?
YouTube says streams under 12 hours are automatically archived, but the cited guidance does not promise one complete replay for a longer stream. If you need a full record, arrange and test a separate recording or archive process.