If you mean “YouTube Live video playlist kaise loop kare” as a viewer, open a video in the playlist and enable Loop in its playlist controls. If you mean broadcasting devotional videos continuously on your channel, playlist repeat will not start a livestream; you need a separate live feed.
Those are two different jobs, even though both involve a playlist and repeated video. The viewer controls repeat playback on one device. A channel broadcast sends a live signal through YouTube Live so viewers can watch it as a stream.
First decide whether you are watching or broadcasting
A playlist Loop control changes what happens in your own YouTube playback session. It can repeat the playlist, or on some devices repeat the current video, but it does not publish a live programme to your channel. You can leave a playlist playing on your television overnight and still not be broadcasting a YouTube Live event.
For a continuous channel stream, you need to create or access a live broadcast in YouTube and send it a feed. YouTube describes mobile, webcam and encoder-based routes for going live; an encoder can be software or hardware. A prepared sequence of bhajans, devotional songs, mantras or visual loops therefore needs to be played into that broadcast workflow, not merely placed in a viewer playlist. See YouTube’s overview of ways to live stream.
The distinction matters before you prepare files or buy equipment. If you only want to listen while doing puja, studying or working, use the ordinary playlist controls and no broadcast setup is needed. If you want viewers to find an ongoing channel stream, work through YouTube Live and your chosen feed method.
| What you want | Use this route | What it does not do |
|---|---|---|
| Keep a playlist playing for yourself | Turn on playlist Loop in the YouTube player | Does not create a live event or send content to your channel |
| Show a continuous devotional programme to viewers | Start a YouTube Live broadcast and send it a feed | Does not follow automatically from creating a playlist |
| Repeat just one track or video | Use the single-video repeat control | Does not repeat the entire playlist |
Loop a playlist while watching on a computer
On a computer, open a video that belongs to the playlist you want to hear. Expand the playlist panel, usually shown beside the player, and click Loop in the playlist controls. The playlist should begin again after its last item rather than stopping at the end.
If you cannot see Loop, first check that you opened the video through the playlist rather than as a standalone video. Then expand the playlist panel so its controls are visible. YouTube may adjust player layout and labels, so the exact position can differ; the official desktop playlist-repeat instructions are the right reference if the control has moved.
There is an important difference between looping the playlist and looping one item. On desktop, the player’s context menu can offer Loop for the current video. That setting repeats just the item on screen, not every entry in the playlist. If your sequence is a morning prayer, aarti, bhajan and closing mantra, use the playlist-level control when you want that order to repeat.
After setting Loop, let the final item finish and check that playback returns to the first entry. That simple check confirms you selected the behaviour you wanted. It still only confirms repeat in your local player; it gives you no indication that your channel is live.
Repeat a playlist on a phone, TV or console
In the YouTube Android app, start playback from the playlist and use Loop in the playlist control box. YouTube’s Android instructions for repeating videos and playlists distinguish playlist repeat from repeating the current video: activating the control again can switch to the current item, shown with a “1” on the loop icon. If the playlist is meant to play in order, check the icon before leaving it running.
On a TV or gaming console, open the playlist, bring up playback controls and select Repeat until the display indicates Repeat • Playlist. That label is a useful check that the whole list, rather than just the current item, will begin again. Interfaces differ between apps and devices, so use the device’s current YouTube Help guidance when the label or control does not match.
If repeat is missing on either type of device, confirm that you are playing a playlist and not a single video. Also try opening the playlist directly from its page and expanding the control area. A viewer may have to repeat these checks after switching devices, because a setting visible on a television is not proof that a separate phone or browser session has the same setting.
For a household devotional routine, a playlist is convenient because you can organise the viewing order and repeat it without starting each item manually. It is not a substitute for channel scheduling or broadcasting. Keep that boundary clear if your aim is to reach viewers who are not signed into your account or are watching from somewhere else.
Prepare devotional videos before you go live
If you are creating a channel broadcast, start with the programme rather than the encoder. Decide what should play, in what order and whether the sequence should repeat without an awkward pause. For example, a channel might arrange an opening prayer, several devotional performances and a closing visual in one sequence, then test how the end connects back to the beginning.
Inspect each source file before relying on it for an overnight or all-day run. Listen for silence at the start or end, abrupt cuts, unexpected changes in volume and missing audio. Watch the transition between adjacent pieces. A technically valid file can still make a poor continuous programme if one video ends with a long black frame or the next begins much louder than the previous one.
Check that the picture and sound are appropriate for the broadcast method you choose. YouTube’s encoder workflow expects an encoder to send a live feed, and the feed must remain active for the event to continue. If you have several files, decide how the encoder will play them in sequence and repeat them; a YouTube viewer’s Loop button does not control this programme. For a command-line workflow, the guide to looping several videos in sequence with FFmpeg covers a more technical route. It is not necessary if you use a simpler playback or cloud workflow.
A small test is useful before announcing a recurring channel schedule. Check the first minutes, a transition between two items, and the point where the sequence returns to its beginning. Confirm that the intended audio is present and that the image is not cropped in a way that hides text or faces. If you add captions or on-screen Hindi text, review them on a television-sized screen as well as on your computer.
Make a written run sheet with the file order, the point where the sequence restarts, and a contact or recovery step for whoever is responsible. This is practical even for a small channel: if a family member takes over monitoring, they can tell whether a pause is planned or something has stopped. A guide to preparing video files for a continuous YouTube Live playlist can help when frame rate is part of your file preparation.
Check rights before sending devotional material
Devotional subject matter does not settle who owns a particular recording or visual. A bhajan may have a traditional composition but a specific performance, arrangement, recording, cover image or video can involve separate rights. Do not assume a track is free to rebroadcast because it is old, already on YouTube, or included in another person’s playlist.
YouTube says livestreams are scanned for third-party content. A match may result in a placeholder, interruption or termination, and even licensed third-party material may be interrupted unless its owner has added the channel to the relevant Content ID allowlist. Read the current YouTube guidance on copyrighted content in live streams before planning the programme.
YouTube’s livestream terms also place responsibility on the provider to have the necessary rights, including music licensing rights. That is why you should confirm rights for each recording and visual before broadcasting, rather than treating a successful upload or an available playlist as permission. The terms do not determine whether a particular song, rendition or image is cleared for your use; you need to establish that for your own material.
Keep a record of the source and permission for the material you plan to use. If a rights holder has given you permission, retain the documentation and ask whether the channel must be allowlisted for Content ID. If you cannot establish the necessary rights, choose content you created or content whose terms expressly permit the kind of live use you intend. Check YouTube’s current official requirements because platform rules and interfaces can change.
Send a separate live feed through an encoder
Once the programme is prepared and rights are checked, open YouTube’s live workflow and choose the encoder route. An encoder takes audio and video playback and sends it to YouTube as the feed for a live event. It can be an application on a computer or a hardware device; a dedicated hardware encoder is not required for every ordinary stream. YouTube’s encoder setup guidance describes the setup and notes that first-time live enablement can take up to 24 hours.
Follow the instructions in YouTube Studio or Live Control Room for the event and stream key. Treat the key like a password: do not publish it in a video, chat or screenshot, and replace it if you believe someone else has seen it. Add the key only in the encoder or broadcast tool you intend to use. Start with an unlisted or otherwise appropriate test if you need to check the feed privately, and verify your channel’s current visibility and event settings before you begin.
YouTube’s eligibility guidance says the channel must be verified and must not have had a live-streaming restriction in the preceding 90 days. Check the official page for the current requirements rather than relying on old setup notes. First-time enablement may take time, so do not wait until the planned devotional programme is due to start before checking that live access is available.
For a modest channel, software playback and encoding may be sufficient if your computer and connection can sustain the work. A hardware encoder is an optional production choice; YouTube recommends professional-grade hardware encoders for higher-production-value events, not as a universal prerequisite. Consider how much hands-on attention your setup needs, what happens if the computer restarts, and whether someone can see that the stream has stopped.
A computer running a local encoder must remain available and connected for the broadcast to continue. That is a practical limitation for channels whose owner wants to switch the computer off overnight. If avoiding a machine left running is the specific problem, a cloud 24/7 streaming service cost guide for India can help you compare the operating approach with a local setup. StreamNeo removes that particular need to keep your own computer running by taking an uploaded video and running it as a YouTube live stream; it does not remove the need to prepare content or check rights.
Choose a playback arrangement you can maintain
There is no single right arrangement for every devotional channel. A volunteer who is present during a short morning broadcast may prefer a computer and software encoder, because it is straightforward to inspect and adjust. A channel aiming to leave a prepared sequence running while its operator sleeps should consider who will notice a stopped feed and what recovery steps are realistic.
Think through the failure points before you choose. With a local computer, power, internet access, operating-system updates and the playback application can all affect whether the feed continues. The article on keeping a 24/7 YouTube stream running after Windows updates is useful if a Windows machine is part of your plan. It is a lofi use case, but the restart and monitoring questions apply to any long-running local broadcast.
For any approach, keep a copy of the source files and a short recovery checklist. Note where to confirm the encoder is connected, which event is active, and how to verify audio and video from a separate viewer session. A viewer-side check is important: the encoder can appear ready locally while the public playback experience is silent, delayed or showing the wrong event.
Do not promise viewers an uninterrupted feed simply because the programme is designed to repeat. A loop can make content repeat; it cannot guarantee that a connection, computer, encoder or YouTube event will remain healthy. Tell viewers what the channel intends to provide, then monitor the actual broadcast and review the current YouTube status and policies when something changes.
Before committing, compare the operating options on the pricing page. When the file and channel are ready, start free — 24-hour trial, no card.
FAQ
Does playlist Loop make my devotional playlist live?
No. Loop repeats playback in the player where you enabled it. To broadcast a continuous programme to viewers on your channel, start a separate YouTube Live event and send it a feed through a supported method such as an encoder.
How do I repeat a playlist on a computer?
Open a video from the playlist, expand the playlist panel and select Loop in its controls. If only one video repeats, check that you used the playlist control rather than the player’s single-video Loop option.
Can I use bhajans already on YouTube in my livestream?
Being available on YouTube does not establish that you have rights to rebroadcast a recording or its visuals. Confirm the necessary rights for each item and consult YouTube’s current live-stream copyright guidance; third-party matches can interrupt a live feed.
Do I need a hardware encoder for a 24/7 devotional stream?
Not necessarily. YouTube supports encoder software as well as hardware, and hardware is an optional route often suited to higher-production-value events. The important practical question is whether your chosen setup can keep sending the feed and whether someone can respond if it stops.