A 24/7 YouTube stream with Livepush uses uploaded prerecorded videos rather than a computer running an encoder all night. You upload the files, arrange them in a looping playlist, connect your YouTube channel, and then launch a prerecorded live event.
The important distinction is that preparing a Livepush schedule does not necessarily start the YouTube broadcast. You still need to create or select the live event, set its details, enable the destination and use the launch control before viewers can receive the stream.
Decide whether a cloud playlist suits your channel
There are two broad ways to run an always-on YouTube channel. You can keep a computer running OBS or another encoder, or you can upload the videos to a cloud playlist service and let that service send the feed after setup.
A self-hosted encoder gives you direct control over video settings, scene changes and local files. It also leaves you responsible for the computer, electricity, local internet connection, operating-system updates, encoder settings and recovery after a fault. The practical details are covered in this guide to setting up OBS on a low-end PC.
A cloud playlist reduces the amount of equipment that must stay powered at your premises. You still need to upload the files and manage the channel, but you do not need to keep the streaming computer running. The trade-off is a recurring service cost, storage limits, destination limits and less direct control over the encoder.
Livepush’s cloud workflow is suited to a channel made from finished files: bhajans, devotional programmes, ambience videos, revision lessons, local information loops or product demonstrations. If your format depends on a person operating scenes live, taking calls or changing sources every few minutes, a local encoder may be the better fit.
If the main problem is leaving a home or office computer switched on overnight, StreamNeo removes that particular task by turning an uploaded video into a YouTube stream that runs from the cloud, with the stream monitored and restarted automatically if it drops. It is still important to check the service’s current features and your own content requirements before choosing a workflow.
Check YouTube live access and choose a Livepush plan
Check the YouTube channel before spending time uploading files. YouTube says the channel must be verified, must not have had a live-streaming restriction in the preceding 90 days, and the person streaming must meet YouTube’s minimum age requirement. Read the current YouTube live-streaming requirements because platform rules can change.
For a newly enabled channel, activation may not be immediate. Livepush’s setup documentation says that first-time live-stream activation can take up to 24 hours. If your channel shows a pending state after verification, this explanation of YouTube live access still being pending may help you separate an eligibility delay from a Livepush configuration problem.
Do this check before building a long playlist:
- Sign in to the correct YouTube channel.
- Confirm that the channel is verified.
- Open YouTube Studio and check whether live streaming is available.
- Check for any current live-streaming restriction.
- If this is the first activation, allow time for YouTube’s review or activation process.
- Confirm that the Google account you will authorise in Livepush has access to the intended channel.
Livepush’s current help-centre material identifies the Creators plan as the plan that includes its 24/7 social-streaming schedule channel. The same material lists the plan at $39 per month, or $32.50 per month when billed annually, with 20 GB of video storage, as listed on Livepush’s site in October 2026. Treat those figures as a dated reference, not a permanent price. Check the current Livepush pricing page before subscribing.
The plan pages and help material have not always used the same naming or displayed every destination limit in the same way. Older Livepush material has used the name Editors, while newer help pages use Creators. The relevant question is whether the plan you are buying currently includes the 24/7 schedule feature, enough storage for your files and enough destinations for your channel. Free and Pro are not identified in the reviewed current help material as including that 24/7 schedule channel.
Do not choose a plan on the assumption that continuous streaming automatically produces YouTube monetisation, approval or additional reach. Those outcomes depend on YouTube’s own eligibility and policy decisions, not simply on the length of a broadcast.
Prepare and upload the prerecorded videos
Prepare the source files before opening the playlist editor. Give each file a useful name, such as morning-bhajan-01.mp4 or revision-algebra-unit-02.mp4, rather than leaving a camera-generated name. Clear names make it easier to check the running order later.
Livepush’s setup guidance recommends MP4 files with H.264 video and AAC audio, 1920×1080 resolution at 30 frames per second, and a constant bitrate around 4,000–6,000 Kbps. These are vendor recommendations for a practical upload format, not universal requirements for every YouTube channel. The guide also says 720p can be acceptable for smaller channels.
For a devotional or music channel, listen to the beginning, middle and end of each file before uploading. Check for silence, clipped audio, an unintended advert, a black frame or a title card that refers to an old date. For a study channel, confirm that the lesson is complete and that any downloadable notes or contact details are still current.
For a local news or information loop, review every date, phone number and notice. A file that was accurate when produced can become misleading when it is repeated for several days. Consider putting the production date inside the video so that viewers can understand what they are seeing.
Keep the files within the storage allowance of the Livepush plan. A long set of high-resolution files can use storage quickly, especially when several versions of the same programme have been uploaded. Remove test exports and duplicates before treating the available space as a content archive.
Upload the files to Livepush and wait for processing to finish. Do not assume that a file visible in the account is ready to stream. If processing is incomplete, a playlist may show the item while the eventual launch still fails or skips it. Check that each upload has a usable thumbnail or preview and that its duration appears sensible.
A playlist does not grant permission to use the material. You should own the recordings or have the necessary permission to rebroadcast them. This matters particularly for commercial music, film clips, television material, stock footage, recorded sermons supplied by another organisation and public-event recordings. YouTube’s live-streaming policies still apply to a prerecorded feed.
Build and loop the Livepush playlist
Once the videos are processed, create a playlist in the Livepush dashboard. Add the files in the order in which you want them to appear. The order is part of the viewing experience: a prayer channel may move from morning chants to readings and then to music, while a revision channel may need lessons to follow a teaching sequence.
Enable the Loop Playlist option. Livepush’s guide says that the playlist repeats when it reaches the end. Without looping, the feed may stop after the final item or require a new action, which is not the same as an always-on schedule.
Before launching, review the playlist as if you were a viewer joining at a random time. Ask whether the titles make sense, whether a long silent gap appears between files and whether the transition from the final item back to the first item feels deliberate. A short holding slide or audio bed can make a boundary less confusing, but it should not be used to disguise a broken file.
The playlist itself is not the YouTube event. It is the source schedule that Livepush will use when you launch the event. You can have a complete playlist and an authorised YouTube destination while the public channel is still offline.
Livepush’s documentation says playlists can be edited while they are running and that changes apply at a subsequent video transition. That can be useful when you need to remove an outdated notice without rebuilding everything. Make changes carefully, however. If a file is being replaced during a live schedule, wait for the next transition and verify that the new order is what you intended.
If you want to understand the viewing logic before committing to a tool, this explanation of using different prerecorded videos in a YouTube 24/7 stream covers why a playlist and a single long video behave differently.
Connect and authorise the YouTube destination
In Livepush, open Destinations and add YouTube. Follow the Google authorisation process, choose the intended YouTube channel and grant the permissions requested for sending the live feed. Read the channel name carefully before continuing, especially if one Google account manages several channels.
The account-linked route is preferable when it is available because Livepush’s documented connection flow retrieves the required RTMP settings through the authorised YouTube account. You do not need to copy a stream key into several screens when the destination is connected in this way.
After authorisation, select whether to create a new live event or use an existing one. The wording can vary as Livepush updates its interface, but the working sequence remains the same: authorise the channel, choose the event, enter the event information and save the destination.
Do not confuse authorising the destination with starting the broadcast. Authorisation gives Livepush permission to work with the selected YouTube channel. It does not by itself mean that viewers can watch a live feed.
If the wrong channel appears, stop before saving. Check which Google profile is active, whether the channel is a Brand Account or another managed channel, and whether the account has the necessary permissions. Reauthorising repeatedly can make the situation harder to diagnose if several Google profiles are open in the same browser.
Create or select the live event
The next step is to create or select the YouTube live event that will receive the playlist. A new event is usually the clearest choice for a new channel or a new programme. Reusing an event can be convenient, but only if its title, description, visibility and intended date still match the broadcast.
Set the event title so that it describes the actual content. “24/7 devotional music” is clearer than a private file name. If the schedule includes several types of content, say so rather than presenting one programme as though it were the entire channel.
Write a description that helps a viewer decide whether to stay. Include the languages used, the broad schedule, the channel’s contact method and any relevant production date. Avoid claims about official status, medical results, guaranteed learning outcomes or spiritual benefits unless you can substantiate them and YouTube’s rules permit the presentation.
Choose the privacy setting deliberately:
| Setting | Useful for | What to check |
|---|---|---|
| Public | A channel intended for general viewing | The title, thumbnail and description are ready before launch |
| Unlisted | Testing the feed with selected viewers | Anyone with the link may be able to watch or share it |
| Private | Internal checking or restricted access | Test viewers must have the appropriate access |
The precise labels and available options belong to YouTube, not Livepush, so check the current event screen before launch. A private or unlisted event can be useful for testing the picture and sound, but it does not prove that a public launch will be configured correctly.
Select the looping playlist as the source for the event. Then save the destination or event configuration. Look for a status that shows the YouTube destination is enabled. If the destination remains disabled, the event may exist in YouTube without receiving the Livepush playlist.
Set the event details and start the stream
After the destination and event are ready, create a new prerecorded event in the Livepush workflow, select the looping playlist and set the start time. Review the event title, privacy, playlist and destination one more time before using Go Live.
This is the point at which many setups stop short. A saved playlist is preparation. An authorised destination is preparation. The broadcast begins only when the event is launched and Livepush starts sending the feed to YouTube.
Use the launch sequence slowly:
- Open the prerecorded-event creation screen.
- Select the playlist with looping enabled.
- Select the authorised YouTube destination.
- Set the intended start time.
- Confirm the event details and privacy.
- Use Go Live.
- Open YouTube Studio or the public viewing link and check the result.
If the broadcast is scheduled for later rather than now, confirm which clock and time zone the interface is using. A correct date with an unexpected time can look like a failed launch when the event is simply waiting for its scheduled start.
Livepush states that it monitors the connection and can automatically restart after connection problems. Treat that as the vendor’s stated behaviour rather than a guarantee of uninterrupted streaming or a promise of a particular recovery time. You should still know where to check the event status and what you will do if the feed remains offline.
Verify the broadcast and plan the schedule
Do not close the browser immediately after launch. Watch the YouTube event from YouTube Studio and, where practical, from a separate device or network. Check that the video is moving, the audio is present, the correct playlist is playing and the public visibility matches your intention.
Look at the first transition between files if you can. A stream that displays one file correctly can still fail at the boundary because of a damaged second file, an unexpected audio format or a playlist-order mistake. Keep a short record of the launch time, event name, first item and any warning shown by YouTube or Livepush.
For viewers on Indian mobile connections, avoid treating a higher resolution as automatically better. Test the actual picture and audio on the audience’s likely devices. If YouTube reports bitrate or stream-health warnings, use this practical guide to bitrate fixes for Indian internet connections, then compare the source settings with the requirements of the current YouTube interface.
Remember the archive limitation. YouTube’s encoder guidance says streams under 12 hours are automatically archived. A deliberately continuous 24/7 broadcast exceeds that duration, so you should not promise viewers one complete replay of an uninterrupted session. Livepush’s 24/7 guide says it creates a new stream session to continue beyond YouTube’s 12-hour limit. That is Livepush’s stated operating behaviour, not a guarantee from YouTube or an independently verified test.
If a complete replay matters, publish important programmes separately as ordinary YouTube videos or keep your own source files and upload selected recordings. A live channel can be useful for continuous discovery, but it is not automatically a permanent archive.
Plan a maintenance routine even when the stream is cloud-hosted. Review the playlist for expired announcements, check that the YouTube event is still visible, remove files you no longer have rights to use and test any major change before putting it into the main schedule. For a teaching channel, update the term or exam information. For a devotional channel, check that labels and language descriptions remain accurate.
YouTube’s rules apply to the whole broadcast. Continuous streaming does not create permission to use copyrighted music or footage, and it does not guarantee entry to the YouTube Partner Programme, advertising revenue or watch-hour credit. Monetisation is conditional on YouTube’s current eligibility and policy requirements.
The complete Livepush sequence is therefore: verify the YouTube channel, choose a plan with the needed schedule feature, upload processed files, create and loop the playlist, authorise YouTube, create or select the event, save the details, launch the prerecorded event and verify the live result. Keeping those stages separate makes it easier to identify whether a problem is with channel access, file processing, playlist design, authorisation or the event itself.
Before committing, compare the operating options on the pricing page. When the file and channel are ready, start free — 24-hour trial, no card.
FAQ
Does creating a Livepush playlist start the YouTube stream?
No. The playlist is the prepared source schedule. You must connect and authorise the YouTube destination, create or select the live event, enable the destination and launch the prerecorded event before the broadcast starts.
Which Livepush plan is needed for a 24/7 YouTube schedule?
The current Livepush help-centre material identifies the Creators plan as the plan with the 24/7 social-streaming schedule channel. Its listed price and included limits can change, so check the current plan page before subscribing rather than relying on an older article or plan name.
Can I use any video file in the playlist?
Use files that Livepush accepts and that have been processed successfully. Livepush recommends MP4 with H.264 video and AAC audio, while also noting that its recommended resolution and bitrate are not universal YouTube rules. More importantly, use content that you own or are licensed to rebroadcast and that complies with YouTube policies.
Will a 24/7 stream create one complete YouTube replay?
Do not assume that it will. YouTube’s guidance says streams under 12 hours are automatically archived, while a 24/7 broadcast exceeds that duration. Livepush describes creating new sessions beyond the 12-hour limit, but that does not guarantee one complete archive or uninterrupted viewing.