To stream a looping Malayalam yoga nidra video as a YouTube Live broadcast, send a local, rights-cleared video file from an encoder such as OBS and enable its loop control. A YouTube playlist repeating for ordinary viewing is not a live broadcast: YouTube Live needs an encoder to send video and audio to a live event.
The practical route is to check that your channel can go live, create an encoder stream in YouTube Studio, add the file as an OBS Media Source, then preview the output before starting. The preview and Live Control Room checks matter: they help you catch a silent soundtrack, a cut-off narration, or a framing problem before viewers see it.
Confirm live access and prepare the video
Start with the channel, not OBS. YouTube’s current eligibility guidance says a channel must be verified and have no live-streaming restrictions in the preceding 90 days; the minimum age to live stream is 16. If you have never enabled live streaming on the channel, activation can take up to 24 hours. Check the current YouTube live-streaming eligibility guidance and allow time before the planned broadcast.
Prepare one finished video file on the computer that will run OBS. The recording might contain a spoken Malayalam yoga nidra practice, gentle background music, still or slow-moving imagery, or some combination. Make sure the image and sound are part of the file and play it through locally before you build the scene. That simple check can reveal a missing audio track or an export that stops before the practice ends.
Use only visuals and audio you own or have permission to use for both the live stream and any replay you may keep. A licence for background music may have limits on live broadcasts, territories, or archived video. Do not assume that permission for a private recording or an ordinary YouTube upload also covers a public live stream and its archive.
YouTube scans live streams for matches to third-party content. A match may trigger a warning or placeholder, or interrupt or terminate the broadcast. YouTube also notes that licensed third-party content can still be interrupted if the rights owner has not allowlisted the channel through Content ID. Check YouTube’s guidance on copyright issues with live streams for the current rules; permission is not a guarantee that a stream will avoid a claim.
A loop is a technical choice, not a monetisation shortcut. YouTube’s monetisation policy applies to live streams and says highly repetitive or mass-produced content with little variation or value may be ineligible. A thoughtfully prepared practice can still be useful to viewers, but do not assume repeating it makes the channel eligible for monetisation. For background on the distinction between a live feed and the broader channel strategy, see our guide to running an always-on Indian music channel with OBS or FFmpeg.
Create or schedule the encoder stream
In YouTube Studio, open the Live Control Room and choose the encoder workflow to create a stream or schedule one for later. The event is the destination for the feed; it is separate from the OBS scene that supplies the video. YouTube provides a stream URL and stream key for the encoder to use. Follow YouTube’s encoder setup instructions if the Studio screens differ from what you remember.
Treat the stream key like a password. Anyone who gets it may be able to send a feed to your event, so do not paste it into a public document, screenshot, or message. If it is exposed, use YouTube Studio to replace it and update OBS with the new key. Keep the event and its key clear in your notes, especially if you manage more than one channel.
For this single prerecorded file, the standard encoder route is a straightforward start. YouTube recommends RTMPS for the usual encoder workflow. It also documents HLS as an alternative for supported codecs or workflows, with higher latency; unless you have a specific need for HLS, use the normal encoder settings YouTube presents for your event. The point is to send the prepared file as a live feed, not to make a video playlist repeat in the YouTube player.
Choose resolution and bitrate according to YouTube’s current encoder table and the actual upload connection where OBS will run. YouTube recommends leaving 20% bandwidth headroom, so do not plan to consume the full measured upload capacity with the stream. Its encoder guidance recommends a two-second keyframe interval and says not to exceed four seconds. Confirm current values in the YouTube encoder settings and bitrate guidance rather than treating a setting from another channel or an old tutorial as universal.
There is no need to buy a webcam or microphone simply to loop a completed recording. The file already supplies the picture and sound. A computer that can play the file and encode the chosen settings may be enough; test that actual setup before relying on it for a long session.
Add the file as an OBS Media Source
In OBS, select the scene you intend to send to YouTube. In the Sources panel, add a Media Source, give it a name that identifies the yoga nidra file, and choose the local video. OBS’s Media Sources guide describes the source and its properties. Keep the file in a location that will remain available to OBS for the entire broadcast.
For a single recording, enable Loop in the Media Source properties. OBS restarts the selected file after playback completes, so the same video begins again. This loop happens in the encoder before the feed reaches YouTube. It is different from repeating a playlist on YouTube for ordinary viewing, which does not create a live broadcast or send a continuous encoder feed.
If you are sequencing several recordings instead of repeating one, OBS has a separate VLC Video source with a Loop Playlist option. That source requires VLC to be installed. It is useful when you want multiple files to play in sequence; it adds another moving part and is not necessary for one yoga nidra video. The comparison is simple:
| Need | OBS source | Loop setting | Consideration |
|---|---|---|---|
| Repeat one local video | Media Source | Loop | Direct choice for a single finished practice file |
| Play several local files in sequence | VLC Video | Loop Playlist | Requires VLC and a playlist arranged in the desired order |
Check the scene canvas after adding the source. If the video does not fill the frame, adjust its size and position in OBS rather than assuming YouTube will correct it. A portrait recording placed in a widescreen scene can leave empty areas or require cropping; preserve the meaningful image and any on-screen text. Our notes on framing portrait video in a 16:9 YouTube loop cover that trade-off in more detail.
Connect OBS to the YouTube stream
Open OBS settings for the stream and select the service and connection method appropriate to YouTube’s encoder workflow. Enter the stream URL and stream key supplied for the event in YouTube Studio. If OBS presents separate fields for server and key, place each value in its corresponding field. Avoid copying spaces or punctuation from surrounding notes, and do not share the key while asking someone to help troubleshoot.
Match the encoder output settings to the resolution and bitrate you chose for the connection. For a stable feed, YouTube’s guidance recommends CBR and the keyframe interval noted above; consult the live settings page for the current supported values and your chosen resolution. The upload connection matters more than a setting that looks impressive on paper. If the connection varies, lower the bitrate or resolution and leave the recommended bandwidth headroom rather than pushing the link to its limit.
A useful planning distinction is whether you need this particular computer to remain on and run OBS. If you do, the local encoder gives you direct control of the scene and source. If the burden is leaving your computer running and watching for a dropped feed, StreamNeo removes that specific operational task by turning an uploaded video into a YouTube Live stream without requiring your computer to stay on. It is YouTube-only, so it does not replace OBS when you need a custom live scene or other destinations.
Preview the scene and check stream health
Before starting the encoder, play the file in OBS and listen from beginning to end of a representative portion. Confirm that the Malayalam narration is understandable, the music is not masking speech, and the expected channels are audible. Check what happens at the end of the file and at the loop point: a hard cut or brief silence may be distracting during a relaxation practice. These are checks to perform on your own recording, not assumptions about how every file will behave.
Look at the OBS preview at the size viewers are likely to see. Check that the image is neither stretched nor cropped in a way that removes a face, text, or visual cue. Make sure overlays are intentional and that no editing controls, desktop notifications, or unrelated windows appear in the scene. If the video is meant to be calm and uninterrupted, a simple scene with just the file can make accidental additions easier to notice.
Start the encoder while the YouTube event is still in preview, and use the Live Control Room to inspect the incoming picture, audio and stream-health messages. YouTube recommends testing with audio and movement similar to the planned stream, then monitoring stream health and its messages. Do not take the event live until the preview represents what you intend viewers to receive. A local OBS preview confirms the scene; the Studio preview confirms that YouTube is receiving it.
If the health display reports a problem, work through likely causes rather than repeatedly restarting without a check. Confirm the key and URL match the selected event, verify OBS is actually sending, and check the connection’s available upload capacity. A bitrate that exceeds what the connection can sustain can lead to instability. You can also return to the file itself if audio is missing or the picture is wrong; encoder settings cannot repair a source file with no sound.
For a long-running channel, think through what happens if a file ends, OBS closes, or the connection drops. Loop handles the end of that selected file; it does not promise that the computer, encoder or network will continue operating. If you are weighing a file loop against a multi-video channel, our guide to running a 24/7 playlist with Indian-language videos explains the broader operating choice without confusing a playlist with the YouTube Live feed itself.
Start the encoder and stop deliberately
Once the YouTube preview and health checks look right, start the event from the Live Control Room when you are ready for viewers to see it. Keep an eye on the event and OBS during the start. The source should continue cycling through the file; if it stops or the event reports a connection problem, pause to identify whether the cause is the media source, encoder or connection.
When the broadcast is finished, stop the stream in the encoder and confirm that YouTube Studio has registered the end of the feed. YouTube says streams under 12 hours are automatically archived, but do not treat an archive as guaranteed or ready to share without checking it. Review the replay’s picture and sound and check its rights or claims status before making it available as an on-demand video. A live broadcast and its archive can have different rights outcomes.
Keep a short record of the event name, source file version, OBS settings and any changes made after preview. If you schedule another session, that note can help you avoid confusing old keys or selecting the wrong scene. It is more useful to record what you actually used than to rely on remembered settings copied from a different connection.
Before committing, compare the operating options on the pricing page. When the file and channel are ready, start free — 24-hour trial, no card.
FAQ
How do I stream a looping video on YouTube Live?
Create or schedule an encoder stream in YouTube Studio, then send a rights-cleared local video from an encoder such as OBS. Enable Loop on the OBS Media Source, connect the event’s stream URL and key, and inspect YouTube’s preview before taking the event live.
How do I loop a video in OBS?
Add the local file as a Media Source and turn on Loop in its properties. For several files, use a VLC Video source with Loop Playlist; VLC must be installed for that source type. Neither setting makes a YouTube playlist into a live broadcast.
Can I stream a prerecorded video as a YouTube Live broadcast?
Yes. An encoder can send a prerecorded local file to a YouTube Live event as its feed, and OBS can repeat that file. Repeating a YouTube playlist is a different viewing function and does not create an encoder-based live broadcast.
Can I use music in a live yoga nidra stream?
Use music only when your permission covers the live broadcast and any replay you intend to keep. YouTube scans live streams for third-party matches, and licensed material may still be interrupted if the channel is not allowlisted by the rights owner. Check the current official copyright guidance and review any replay’s claims status before sharing it.