If Larix Broadcaster keeps asking for camera permission, first establish whether your phone camera is meant to be the live source or whether you are trying to send a prerecorded video file. Larix is documented as a mobile encoder for live camera video; the reviewed official materials do not establish that it plays local prerecorded files.
That distinction matters because granting camera access may be relevant to a camera-based broadcast, but it does not demonstrate that a file-playback workflow will work. The repeated prompt’s exact cause cannot be identified without your device, operating-system version, permission state, prompt wording and the steps that trigger it.
What the camera permission prompt can tell you
A camera permission request is about access to a device capability. It does not, by itself, tell you why the app requested it again, whether an earlier choice was saved, or whether the current broadcast workflow is appropriate for the source you want to use. Treat the prompt as a clue to investigate rather than a diagnosis.
Larix’s own app listings describe a mobile live-video encoder with camera capture. YouTube’s mobile encoder guidance also describes Larix Broadcaster as an app for capturing and streaming live video from mobile cameras. Camera permission therefore makes sense when the intended source is the phone’s camera.
A permission prompt can recur for different reasons, and the available sources do not explain the behaviour for every device or operating-system version. A changed permission choice, a device-level restriction, or a particular sequence of actions may be relevant, but none can be assumed from the prompt alone. Do not reinstall the app or change several settings at once on the strength of a guess: that can make it harder to identify what changed.
Start by writing down the exact prompt and when it appears. Does it show on launch, after you tap a camera control, when you connect to YouTube, or when you try to start the broadcast? Note whether the operating system says access is denied, limited or blocked. Those observations are more useful than assuming that every prompt points to the same fault.
Check whether Larix is opening its camera-capture path
Separate the intended input from the app’s current path. If you want to show a live view from the phone, you are asking for camera capture. If you want the audience to see an existing bhajan recording, study session, product demonstration or other saved video, you are asking for prerecorded-file playout. Those are different jobs, even if both are broadcast to a YouTube Live event.
The Google Play listing for Larix describes live camera capture and recording, and the Apple App Store listing describes front and back camera capture, live switching and recording. Neither reviewed listing establishes local prerecorded-file playback as a supported function. You can inspect the Google Play listing and the Apple App Store listing for the version and platform you use, but do not infer file playout from the presence of recording features.
Recording what the camera sees and playing an existing file are not interchangeable. A feature that saves a camera recording does not prove the app can select a saved video as the broadcast input. Likewise, being able to connect Larix to YouTube does not establish that every kind of source can be sent through that connection.
Look at what you tap just before the request appears. If you select a camera, switch between front and rear views, or start a camera preview, the camera-capture path is a plausible part of the workflow. If your intention was to select a file but the app instead opens a camera preview or asks for camera access, stop and check the app’s documented input options. That observation still does not prove why the prompt repeated; it tells you which path you are currently testing.
For a prerecorded programme, choose an encoder whose documentation explicitly says it accepts the file or playlist input you need. This is especially important for a channel intended to run for hours or overnight: a one-time manual camera test cannot establish continuous file playback. A useful comparison is how to stream prerecorded product comparison videos on YouTube Live, which addresses the recorded-video workflow rather than treating a camera encoder as a file player.
Review permission status on your Android device
If your intended source is the phone camera, review Larix’s permission in Android’s own settings before testing again. Menu labels and paths vary between Android versions and manufacturers, so use your device’s Settings search for “Larix” or “camera” rather than relying on a universal sequence of taps. Open the app’s permission details and record what the device reports for camera access.
Do not change unrelated permissions as a precaution. If the phone shows camera access as denied, blocked or otherwise restricted, that is relevant evidence for a camera-based test. If access is allowed but the app asks again, note that discrepancy; the reviewed sources do not provide a universal fix for it. The precise meaning of the status and any additional controls depend on the device and operating-system version.
A careful test changes one thing at a time. Record the current status, make only the permission change you intend to test, then repeat the same action that brought up the prompt. If the prompt returns, capture the wording and the point in the workflow where it appears. Avoid switching between several permission states, reinstalling, and changing app settings in a single attempt, because the result will not show which change mattered.
If Android does not list Larix where you expect, or the wording differs from the instructions you have found, do not force a menu path from another phone model. Check your manufacturer’s current documentation or contact the app developer with the device model, Android version, app version, exact prompt and reproduction steps. Keep the evidence factual: for example, “camera access shows as allowed; prompt appears after tapping Start” is more useful than “Android keeps resetting it.”
Camera streaming and prerecorded-file playout are different jobs
A camera stream takes its live picture from the phone. A prerecorded stream needs an encoder that can take the saved video or playlist as its input and send that output to YouTube. The destination can be the same, but the input and controls differ. This distinction is central if your goal is a continuous devotional, lofi, news or study channel rather than a live phone-camera report.
The reviewed Larix materials describe camera capture and recording, not local file playout. That is a limit on what can be concluded from those sources, not proof that a particular version cannot offer some other workflow. Check the exact app version and its current documentation before relying on any feature. Do not assume the ability to record means it can play a local video back into a live broadcast.
| Your intended programme | Input the encoder must support | What to verify |
|---|---|---|
| Live view from a phone | Camera capture | Camera permission, preview and connection to YouTube |
| One existing video file | File input and playback | That the encoder documents local-file playout |
| Repeated or continuous recorded material | Playlist or looping playback | That looping behaviour and unattended operation are documented |
The table is a way to define the task, not a ranking of products. An encoder may support one input and not another. Before moving a channel’s whole workflow, test the relevant input and confirm how the programme behaves when the phone locks, the app is interrupted, or the file reaches its end. Do not assume a test of camera permissions says anything about those playback behaviours.
If your aim is an always-on channel built from recorded lessons, the distinction is similar to the one in this guide to recorded coding lessons on YouTube: the video source must be something the chosen encoder can actually play. For music-led channels, creating separate 24/7 radio streams for different moods also illustrates why the content programme and its playback method should be planned together.
Connect a scheduled YouTube stream as an encoder
Scheduling an event in YouTube Studio creates the event; it does not automatically supply the programme or make a mobile encoder play a file. YouTube’s encoder setup instructions explain using the server URL and stream key to connect an encoder. For a scheduled broadcast, the documented sequence is to start sending the encoder output, wait for the preview in Live Control Room, then select Go live there.
Copy the current stream URL and key from the relevant YouTube Live setup and enter them in the encoder as instructed by YouTube. Keep the key private: it is a credential that lets an encoder send a signal to your event. If you suspect it has been exposed, consult YouTube’s current controls rather than sharing it while asking for help.
A clean test separates connection from source selection. First establish whether the encoder can send the intended input. Then confirm that YouTube receives a preview for the scheduled event. If the phone camera is the input, camera permission is part of that test. If the input is a prerecorded file, the first question is whether the selected encoder documents file playback, not whether granting camera access makes a preview appear.
Do not treat a scheduled event as a substitute for starting the encoder at stream time. Conversely, do not click Go live just to clear a prompt before confirming that the preview contains the right content. For a repeatable recorded programme, document who starts the encoder, how the preview is checked and what happens if the input ends. YouTube notes on its help page that streams under 12 hours are automatically archived; that archive rule is not a guarantee that the encoder will keep sending a signal or that a file will loop.
Retest with the exact steps that trigger the prompt
A useful retest is a small reproduction, not a sequence of unrelated fixes. Record the phone model, operating-system version, Larix version, exact prompt text, current permission status and whether the intended input is the live camera or a saved file. Include the specific action immediately before the prompt appears. These details are needed before anyone can distinguish a permission-state issue from an input-path mismatch or another device-specific behaviour.
For a camera test, keep the sequence simple: open Larix, choose the documented camera view, note the permission state, and record whether a preview starts. If the prompt appears, stop and note the wording rather than repeatedly tapping through it. If permission is already allowed, say so explicitly. The purpose is to capture what happens, not to assume that granting access will solve a recurring request.
For a file-based test, do not describe it as a Larix file stream unless you have confirmed the version’s documented file-playback capability. State which file, selection control and encoder you are using. If Larix opens a camera screen, record that as the observed result. Then test the file with an encoder whose documentation confirms that kind of input, keeping the YouTube event and connection details separate from the question of playback.
Change only one relevant variable between attempts. For example, if you change camera access from denied to allowed, keep the app version and steps the same. If you update the app, do not also alter several system settings before retesting. This will not identify every possible cause, but it gives app support or device support a reproducible account instead of a general report that the camera prompt “keeps coming back.”
A short screen recording can help if it does not reveal your stream key or private account details. Otherwise, write the sequence in plain language: “I open the app, tap this control, and this exact message appears.” Do not include credentials in a public forum. If the symptom happens only after a particular device action, such as reopening the app, say that rather than generalising it to all use.
When to check app or device support
Check the app developer’s current support information when the prompt’s text, app version or observed behaviour does not match what you expect. Check your phone manufacturer or operating-system guidance when the permission status cannot be changed, the app is missing from the expected settings view, or the device presents a restriction you cannot interpret. Give support the model, OS and app versions, exact wording, current permission status and a repeatable sequence.
Use the current app listing for your platform to confirm what the app claims to do. The Android and Apple listings have different platform details, and a feature description on one is not proof that the other has the same controls. App listings and operating-system settings can change; check the current source for your device rather than relying on a menu path or feature note written for another release.
If the problem is specifically that Larix does not appear to offer the file or playlist input your programme needs, ask the developer whether that capability is documented for your platform and version. Do not frame that as a camera-permission defect unless the evidence connects the two. A different encoder may be the appropriate choice if it explicitly supports the required file source and YouTube connection method.
For an always-on channel, also decide whether a phone-based workflow is suitable for the operating conditions. A phone app requires the phone and app to remain available for the broadcast; a desktop workflow may suit someone who needs local editing or direct control, while a cloud workflow can avoid leaving a personal computer running. Each adds different setup and monitoring responsibilities. Compare the input support, unattended operation, recovery behaviour and YouTube connection process rather than choosing solely by whether the first test starts.
When the problem is not permission but keeping a recorded programme going without your computer, StreamNeo removes the need to leave that computer running by turning an uploaded video into a YouTube live stream. It is YouTube-only, and it does not resolve an unexplained Larix permission prompt or replace checking the programme and event before broadcast.
Before committing, compare the operating options on the pricing page. When the file and channel are ready, start free — 24-hour trial, no card.
FAQ
Does granting camera permission let Larix stream a prerecorded video?
Not necessarily. Permission allows access to a device capability; it does not establish that Larix can play a local file as its live programme. Check the selected app version’s documentation for file-playback support before building your workflow around it.
Why does Larix keep asking after I have allowed camera access?
The prompt alone does not identify the cause. The device model, operating-system version, exact wording, permission status and action that triggers it are needed to investigate; the reviewed sources do not document a universal fix.
Does scheduling a YouTube Live event start the broadcast?
No. YouTube’s encoder workflow requires the encoder to connect using the stream URL and key and send its output. For a scheduled event, YouTube instructs you to wait for the encoder preview in Live Control Room and then choose Go live.
What should I send to support?
Provide your device model, OS and Larix versions, the exact prompt, the permission state shown in settings and the steps that reproduce it. Say whether you intend to use the camera or a prerecorded file, and do not share your stream key.