“Larix Broadcaster not working” can mean the app will not open, the stream will not connect, it stops after you lock the phone, or YouTube receives choppy video. Identify which of those is happening first; each points to different checks.
Larix supports YouTube Live on Android, but there is no verified universal MIUI or HyperOS setting path that fixes every Redmi or Xiaomi phone. Check the YouTube setup and network as well as the phone, and note your exact model and software version before changing device settings.
Identify where the failure happens
Start with the first point at which something goes wrong. Does Larix crash before you can set a destination? Does it remain open but fail to connect? Does it connect, then stop when you switch apps or lock the screen? Or does the broadcast stay live while its picture stutters and frames drop? These are distinct symptoms, not different names for one Xiaomi fault.
Write down what you see in Larix and YouTube Studio, and when it happens. For example, note whether the stream reaches YouTube before you lock the phone, whether it stops immediately or after a while, and whether the preview is already choppy while Larix is in the foreground. If a different network changes the result, record that too. A short, controlled test is more useful than changing several settings at once.
Keep the model, Android version, MIUI or HyperOS version, Larix version and YouTube account in your notes. Menu names and available controls can vary by build and region. Without those details, “Xiaomi setting” is too broad to identify a reliable procedure.
| What you observe | First checks | What it suggests |
|---|---|---|
| Larix closes or will not open | App update, restart, available storage, repeatable crash | An app or phone launch issue |
| Larix opens but will not go live | Destination, server URL, stream key, YouTube account and stream state | A setup or eligibility issue |
| Stream stops after switching apps or locking | Whether Larix was closed, then background restrictions | A background interruption |
| Stream stays connected but looks uneven | Upload stability, network changes, bitrate and encoder demands | A quality or network issue |
This table is a way to prioritise checks, not a diagnosis. A failure that appears on one Wi-Fi network but not another may have a different cause from an app that crashes on launch. Change one relevant condition at a time so you can tell which test made a difference.
If Larix will not open
If the app closes as soon as you tap it, or crashes while opening a profile, do not begin by changing YouTube’s stream key. The broadcast setup is not yet being reached. Restart the phone, check whether Larix has an available update in its app store, and see whether the phone has room to run and update apps. Then open Larix again and note whether it fails at the same point.
If it opens but hangs only when you load a particular saved connection or profile, distinguish that from a general launch failure. Try to reach the app’s settings without starting a broadcast, and check the profile information you can safely inspect. Avoid deleting saved settings before noting the server details you may need to enter again. If the app consistently crashes, record the phone model and software build alongside the point of failure before contacting Larix support.
A phone restart or app update is a basic diagnostic, not proof that the underlying issue has been fixed. If the app opens after a restart, test it again before relying on it for a scheduled stream. If the failure returns, that repeatability is useful evidence. Do not install an unofficial app package or grant unrelated permissions as a shortcut; use the listing and support channels for the app version you actually have.
The Google Play listing describes Larix Broadcaster as an Android encoder supporting YouTube Live and RTMP/RTMPS. That confirms the broad destination and protocol capability, not that every phone configuration or saved profile will work. Check the current Larix Broadcaster listing for current app details.
If your real goal is a continuous channel rather than an occasional phone broadcast, a phone that must remain awake and in the foreground may not suit the job. A practical alternative is to prepare the video and stream setup separately; for a prerecorded channel, see the encoder settings guide for a 24/7 YouTube channel. That is a different workflow from fixing a crash in Larix, so decide which problem you are solving.
If streaming stops in the background
If Larix works until you lock the phone, switch apps or leave it running in the background, first establish what action preceded the stop. Did you swipe Larix away, use a cleaner or task manager, or see an Android notification that the app was restricted? Did the stream stop only after the display went off, or does it continue while you use another app? Those details help separate an explicit app closure from a device-level background restriction.
Softvelum’s Larix FAQ says Android background operation is available by default until the app is explicitly closed. Treat that as the app maker’s description of expected behaviour, not a promise that every Xiaomi software build will keep a particular session alive. On your phone, check whether Larix remained open and whether a battery-control or cleanup feature might have acted on it.
Redmi and Xiaomi phones do not all present the same software version or settings. Look for the relevant app-specific battery or background controls on your own build, using the phone’s current help material if the labels are unclear. Do not assume a menu path from a different model applies to yours, and do not turn off broad protections without understanding the effect. If you find a control that restricts Larix, note its original state and test one adjustment at a time.
Also check your own habits during the test. A manual swipe-away, a “clear all” action, a scheduled cleanup utility or an app manager can close a stream regardless of the phone brand. Start another test, leave Larix open, lock the screen once, and observe YouTube Studio from another device if possible. If the stream continues, repeat the test before concluding that the problem has gone; if it stops, record the timing and any phone notification.
When an always-on broadcast depends on a mobile app remaining open all night, background behaviour becomes an operational risk even if you can sometimes make it work. For a channel built from a prepared video, StreamNeo removes the need to keep your Redmi or Xiaomi phone switched on by turning the uploaded file into a YouTube live stream that runs with your computer off. It is YouTube-only, so it is not a fix for a mobile broadcast you need to film live from the handset.
If Larix will not connect to YouTube
When Larix stays open but cannot start a broadcast, confirm the destination and the YouTube details before blaming a phone restriction. YouTube’s encoder workflow uses a server URL and stream key; check that you entered the values for the intended live stream and account. A typo, an old key or details copied from a different scheduled stream can prevent the encoder from reaching the intended broadcast.
YouTube’s encoder guide explains how to set up a live stream with an encoder, including use of the server URL and stream key. Follow the current instructions there and confirm the stream is ready in YouTube. Keep the stream key private: anyone who has it may be able to send video to the channel. If you suspect it was exposed, use YouTube’s current controls to replace it rather than sharing it in a support post.
Check whether YouTube receives any signal at all. If it does not, focus first on the destination settings, connection and account. If it receives a signal but the broadcast is not public or does not appear where you expect, inspect the YouTube stream’s own status and visibility rather than repeatedly changing Larix settings. Keep a note of any exact error text; “cannot connect” is less useful than the message Larix actually shows.
It can also help to test a stable network without changing the stream profile. If the connection succeeds on one network but not another, the network path may be involved. That observation does not prove a particular router, mobile carrier or Xiaomi setting is responsible, but it helps narrow where to investigate. Avoid repeatedly regenerating keys while you are testing network conditions; change one variable and preserve a known-good configuration.
A failed connection and a channel that is not eligible to go live are also different cases. Check the account and workflow that you are using in the next section, rather than assuming requirements for YouTube’s own mobile app apply identically to every encoder setup.
If YouTube receives video with dropped frames
A stream can connect successfully and still look poor. If YouTube receives video but the picture stutters, freezes or drops frames, check the upload connection and the stream’s demands before changing unrelated phone settings. A changing or unstable upload can interrupt delivery even when the phone remains connected to Wi-Fi or mobile data.
Run a short test on the network you intend to use, then compare it with another reliable connection if available. Keep the resolution, frame rate and other settings unchanged during that comparison. If the second connection behaves better, investigate the original connection’s stability and upload conditions. If both show the same problem, reduce the stream’s demands and test again rather than assuming the phone’s battery controls caused frame loss.
Larix’s FAQ notes that RTMP and RTSP can show frame loss as network conditions worsen. It also describes SRT recovery within its configured latency and adaptive bitrate for unreliable networks. Those protocol and feature choices are not interchangeable magic fixes: what you can select depends on the destination and current app edition, and changing transport protocol may require matching settings at the receiving end. Check Larix’s current documentation before switching protocols.
If the current Larix edition and setup offer adaptive bitrate for your workflow, it may help when available upload capacity changes. Otherwise, reduce bitrate or other stream demands and make a new test. Lowering the amount of video data sent can improve the chance that the connection keeps up, but it also affects picture detail. Use a setting that your network can sustain, then confirm the result in YouTube rather than judging only the local preview.
For more context on settings for a continuous prerecorded broadcast, the 720p Kannada songs stream settings example may help you think through encoder choices. It is an example, not a prescription for every Redmi phone or a replacement for checking your own upload connection. If the stream’s audio and picture are otherwise stable but video segments have silence between them, that is a separate issue covered in the guide to audio gaps between videos in a YouTube live loop.
Check account eligibility and connection details
YouTube account rules depend on the way you start a live stream. YouTube’s mobile-live help lists a verified channel, no live-streaming restrictions in the previous 90 days, live streaming enabled, and at least 50 subscribers among its requirements for mobile live streaming. It also lists Android 8.0 or later for that mobile flow and says enabling a first live stream can take up to 24 hours. These are requirements on YouTube’s mobile-live help page, not a claim that Larix has the same Android minimum or that every encoder-based workflow follows the same path.
Read YouTube’s current mobile live streaming requirements for the account and workflow you are actually using. If you are starting directly in YouTube’s mobile flow, check each listed requirement and allow for the possible activation delay. If you are sending a stream from Larix as an encoder, confirm the encoder instructions and account state for that route rather than treating a mobile-app requirement as a Larix error message.
There is a further distinction in Google’s developer documentation: its requirements for launching YouTube’s Mobile Live flow from another Android app are about that integration, not Larix’s minimum Android version. The documented Mobile Live deep-link scenario specifies Android Marshmallow/API 23 or later, a camera capable of 720p at 30 frames per second, a microphone, specified hardware audio and video encoders, and YouTube app version 13.02 or later. See the YouTube Android developer documentation for scope and current details. Do not use those integration requirements to diagnose a standard Larix encoder connection unless you are actually using that deep-link workflow.
Before changing the phone, verify three separate things: that the correct YouTube account is selected, that the stream key and server URL belong to the intended stream, and that YouTube is ready to receive it. Then test the phone’s network and background behaviour independently. This order prevents an account or key problem from being mistaken for a Redmi setting, and it gives you clearer evidence if you need help from YouTube, Softvelum or the phone maker.
For a scheduled stream, write down the working configuration and the exact symptom if a test fails. Include the handset model, software build, app version, network type, whether the phone was locked, and what YouTube showed. Do not publish a stream key or share screenshots that expose it. A concise record makes it easier for support to distinguish a launch crash, background closure, rejected destination and network-related frame loss.
Before committing, compare the operating options on the pricing page. When the file and channel are ready, start free — 24-hour trial, no card.
FAQ
Why does Larix stop when my Redmi screen locks?
First check whether Larix was explicitly closed, cleared by a task manager, or restricted by an app-specific background or battery control. Larix says Android background operation is available unless the app is explicitly closed, but that does not establish one Xiaomi menu path or guarantee behaviour on every build. Note the model and software version and test one relevant change at a time.
Why will Larix not connect to YouTube?
Check that the server URL and stream key match the intended YouTube stream, and confirm that YouTube is ready to receive it. If the account or stream is not eligible for the workflow you are using, resolve that separately. Keep the key private and use the exact error message to guide the next check.
What should I do if YouTube keeps dropping frames?
Compare upload stability on the intended network with another reliable connection, keeping the stream settings unchanged. If needed, reduce bitrate or other stream demands and test again; adaptive bitrate may be available depending on the Larix edition and workflow. A connected stream with frame loss is not, by itself, evidence of a Xiaomi battery setting problem.
Do all Redmi and Xiaomi phones use the same Larix fix?
No. Models, regions, Android versions and MIUI or HyperOS builds can differ, and the available evidence does not establish a universal settings path for Larix Broadcaster. Identify the failure stage and verify any device-specific instructions against your exact build.