Livepush documents prerecorded video playlists and continuous looping for YouTube, but the material reviewed does not confirm that those loops can be sent as vertical 9:16 streams. It also does not confirm that a Livepush loop will appear in YouTube’s Shorts live feed.
Those are separate questions: whether a service can repeat prerecorded video, whether it can route a portrait-format live stream, and whether YouTube surfaces that stream while viewers browse Shorts. Treat the combination as unverified until Livepush confirms the output path and you test it on your channel.
Short answer: the combination is unverified
The direct answer is that Livepush documents looping, while Livepush support for portrait output and Shorts live-feed discovery is not established by the sources reviewed. YouTube, separately, documents a vertical live-stream experience and ways to set up vertical streams. Neither fact proves that Livepush’s prerecorded playlist feature can produce that format or feed placement.
It helps to keep three terms distinct. A loop is playback of one or more prerecorded videos repeatedly or as a continuing playlist. A vertical live stream is a live broadcast delivered in a portrait-oriented format, commonly described as 9:16. The Shorts live feed is YouTube’s mobile discovery surface where viewers browsing Shorts may encounter vertical live streams. A loop can be live in the sense that YouTube receives an ongoing broadcast, even though its pictures and sound were recorded earlier.
For a practical decision, ask two questions of Livepush before buying or building around this workflow: can its prerecorded playlist output be sent to YouTube as 9:16 using the vertical stream route, and does YouTube recognise that particular output for Shorts live discovery? A general “YouTube is supported” answer is not enough to settle either point.
If portrait discovery is essential, do not assume a landscape loop will be converted or that a vertical-looking video alone will be routed as a vertical live stream. If uninterrupted prerecorded playback is the main requirement, Livepush’s documented loop capability may still be relevant, provided you verify plan terms, duration conditions and the exact channel setup.
What Livepush documents about prerecorded loops
Livepush’s Help Center describes multi-video playlist streaming as videos played one after another as a continuous livestream. It presents playlists as a way to run a 24/7 channel and indicates that playlists are available on plans with a 24/7 schedule channel. Livepush’s product page also describes uploading recorded videos, scheduling them to YouTube, playlist playback and continuous looping. These are vendor descriptions of its prerecorded workflow, not evidence of portrait output.
The distinction matters when you plan content. In a prerecorded loop workflow, you prepare the video assets in advance and the service schedules or repeats them. That can be suitable for a devotional programme, a study ambience video or a music rotation that does not need a camera operator to be present. It is different from a creator-operated broadcast where a camera, microphone or encoder produces a live picture and sound signal in real time.
Livepush’s destinations article identifies YouTube as a supported destination. That establishes a general destination connection, but the article does not say that the connection exposes a portrait-specific stream key, selects YouTube’s vertical stream route, or creates simultaneous horizontal and vertical outputs. A supported destination answers “can this service send a stream to YouTube?” It does not necessarily answer “which stream formats and YouTube discovery features does this workflow support?”
The plan page is also relevant, but only for the loop and schedule question. Livepush lists a Creators plan with a 24/7 schedule channel and video looping. The research notes record the page’s listed price as $39 monthly, or $32.50 per month when billed annually at $390, as accessed on 3 October 2026. These are page-listed commercial terms, not a promise about checkout or future prices; confirm current plan and price details directly with Livepush before you commit.
Livepush’s product page says its recorded-video scheduling can operate without leaving a local computer switched on, and claims continuous loops subject to plan stream-duration limits. Treat both as vendor claims and check the specific duration conditions for the plan and schedule you intend to use. A service’s ability to keep a prerecorded playlist running does not establish how a portrait stream is encoded, whether two formats can run together, or whether a particular YouTube surface will carry it.
If the intended channel is a music or devotional rotation, the editorial and rights questions remain separate from technical compatibility. A workflow that repeats files still needs content you have permission to use and a schedule viewers can understand. For a practical example of planning a regional playlist, see this guide to scheduling regional music for a 24/7 YouTube radio stream in India. For a devotional format, setting up a Hindi devotional video loop with OBS illustrates a different operating approach; it should not be read as proof of Livepush’s portrait capabilities.
What YouTube documents about vertical live streams
YouTube Help documents vertical live streams as part of a mobile-focused viewing experience. YouTube says viewers browsing Shorts on mobile can find vertical live streams, and that opening one leads into a full-screen vertical live experience. That describes YouTube’s format and discovery behaviour; it does not promise that every vertical broadcast will be recommended or surfaced to every viewer.
YouTube also documents a dual-format setup in Live Control Room, allowing a horizontal 16:9 and vertical 9:16 version to be run at the same time. For a third-party encoder, YouTube’s instructions describe RTMP(S) and selecting a second stream key for the vertical stream. The setup route matters: sending a normal YouTube stream is not automatically the same as configuring the vertical stream output.
The official instructions further say that vertical format cannot be added after a stream has started. In other words, format selection is a pre-broadcast decision, not a switch you should expect to enable once the stream is already running. Check the format and stream key in advance, and allow time to validate the result before treating it as a production workflow.
You can read YouTube’s current live streaming instructions and its vertical live-stream guidance before configuring a channel. The Help pages are the source for the YouTube behaviour described here; recheck them because YouTube’s product and setup instructions can change.
A creator using a camera or encoder can follow YouTube’s documented setup directly, subject to the encoder and workflow actually supporting the required outputs. If you need a prerecorded programme rather than live capture, that does not mean you must use a camera route, but it does mean you need evidence that your chosen scheduler supports the relevant format and stream-key arrangement. YouTube documentation explains YouTube’s side of the connection; it does not certify every third-party scheduler.
For readers weighing a local continuous setup against a managed prerecorded workflow, the operational difference is worth spelling out. A local encoder may give you more direct control over a custom scene and live inputs, but requires a computer and a stable process while it runs. A cloud-based scheduler may suit uploaded files and planned playback, but only if the output format, routing and monitoring needs are supported. Neither approach guarantees discovery in Shorts.
Why looping does not confirm portrait output
Looping describes playback behaviour, not the dimensions or orientation of the outgoing live signal. A playlist can repeat a landscape file continuously and still be landscape. It can also contain portrait source video without necessarily being transmitted through YouTube’s vertical-live route. The shape of the uploaded content and the format of the stream sent to YouTube are related but distinct parts of the workflow.
To establish portrait output, you need confirmation about the entire chain: whether the scheduler accepts portrait video, whether it preserves or scales that orientation as intended, whether it can choose the vertical stream key or equivalent route, and whether YouTube receives the result as a vertical live stream. The documents reviewed establish none of those Livepush-specific details. Do not infer them from the words “playlist”, “continuous” or “YouTube destination”.
A useful example is a 16:9 bhajan video with a central singer. Cropping the picture to a tall frame could cut off the harmonium player or lyrics at the edges. Padding the landscape frame to fit a portrait canvas could leave empty space. Even if you prepare a 9:16 version yourself, that only addresses the media asset; you still need to verify the outgoing stream configuration and YouTube’s recognition of it.
If both landscape and portrait audiences matter, ask whether Livepush supports simultaneous dual-format output from the same playlist, or whether you would need separate schedules and stream keys. YouTube’s native dual-format documentation does not mean a third party has implemented that arrangement for prerecorded loops. Equally, a scheduler might support one format but not both; make the exact requirement explicit before you organise content and subscriptions around it.
For file preparation, check resolution, aspect ratio, framing and any on-screen text on the actual playback device. A title placed close to the edge can be clipped after a crop, and small captions may be hard to read on a phone. If you are using an encoder route instead of an uploaded loop, this guide to bitrate and scaling fixes for a blurry YouTube live stream can help diagnose image quality, but it is not a substitute for verifying the vertical stream route.
The safest wording for a production plan is “Livepush supports documented prerecorded looping; portrait output remains to be confirmed.” That makes the established capability useful without overstating the missing one. Keep the distinction in your notes if you are comparing vendors, asking support questions or explaining the plan to someone who manages the channel.
Why vertical live does not confirm Shorts-feed placement
A stream can be vertical without a guarantee that viewers will encounter it in the Shorts live feed. YouTube’s documentation describes the availability of vertical live streams while browsing Shorts on mobile, but does not promise placement, reach or a particular amount of discovery. Feed visibility is different from simply broadcasting in portrait format.
There is a second gap here: YouTube’s description of its own vertical-live behaviour does not say that a Livepush-generated loop is eligible or recognised in that surface. The reviewed Livepush material confirms a YouTube destination, not the Shorts feed. The reviewed YouTube pages explain vertical live setup and discovery, not compatibility with Livepush’s playlist feature. Neither side’s general documentation closes the gap.
Even if Livepush confirms that it can send 9:16 using the vertical key, the feed question should still be tested separately. Ask whether the resulting stream is categorised by YouTube as vertical live and whether it is eligible to appear while a mobile viewer browses Shorts. A support reply about “portrait video” or “YouTube streaming” may describe only one part of that chain, so request a direct answer about the complete route.
Discovery can also vary with YouTube’s own product behaviour and viewer context. Do not promise an audience or describe feed placement as automatic in your channel plan. If you are setting expectations for viewers, share the live URL or schedule through your usual channel posts as a separate route, rather than relying solely on Shorts browsing.
For a 24/7 channel, continuity deserves its own plan too. A feed listing is not a fallback if a stream drops, and looping does not by itself ensure that your live broadcast remains connected. Think through what happens when playback stops, when a scheduled file ends, or when the destination reconnects. This guide on what a 24/7 channel should consider when a stream goes offline covers the broader operational concern without implying that any specific service avoids interruptions.
What to verify before building the workflow
Get a written answer from Livepush before choosing it specifically for vertical looping. State that your source is a prerecorded playlist, your destination is YouTube, and your target is a 9:16 vertical live stream using YouTube’s vertical stream route. Ask whether the feature is available on the plan you are considering and whether it supports one vertical output or simultaneous horizontal and vertical outputs.
Then ask the separate discovery question: does this exact prerecorded output qualify as a vertical live stream that YouTube may show in the Shorts live feed? Ask what you can observe in YouTube Studio or on a mobile device to confirm the stream is configured correctly. Do not treat an affirmative answer about the video file’s dimensions as an affirmative answer about YouTube routing or feed eligibility.
| Decision point | What the reviewed sources establish | What you still need to verify |
|---|---|---|
| Prerecorded playlist and loop | Livepush describes queued video playback, playlists and continuous looping for its 24/7 workflow. | Current plan inclusion, schedule limits and stream-duration conditions. |
| YouTube destination | Livepush identifies YouTube as a supported destination. | Whether the destination setup offers the vertical stream key or equivalent route. |
| Vertical live format | YouTube documents vertical live and a third-party encoder path using RTMP(S) with a second stream key. | Whether Livepush implements that route for prerecorded playlists. |
| Shorts live discovery | YouTube says viewers can find vertical live streams while browsing Shorts on mobile. | Whether a Livepush loop is recognised and eligible for that surface; placement itself is not guaranteed. |
| Dual-format output | YouTube documents a horizontal and vertical setup in Live Control Room. | Whether Livepush can produce both formats from one playlist and how each is configured. |
Run a small test before moving the full channel. Use a short, rights-cleared clip with clear portrait framing, configure the format before going live, and inspect the result in YouTube Studio and on a phone. Confirm that the viewer experience is full-screen vertical and separately check whether the stream is discoverable through Shorts browsing. A test that only confirms the picture is tall does not verify feed placement.
Keep a fallback that matches your actual need. If a vertical feed presence is essential and Livepush cannot confirm its route, use a workflow that explicitly supports YouTube’s documented vertical setup, or wait until the scheduler can demonstrate it. If prerecorded 24/7 playback matters more than portrait discovery, you may choose the documented loop function while presenting the format and feed questions as unresolved rather than assumed.
Also review the channel’s scheduling and content plan. A continuous devotional stream, for example, may have a sequence of services or a repeated video; a 24/7 morning aarti stream plan can help you think through programming, but it does not address Livepush format compatibility. Keep the practical questions separate: rights and playlist order, service duration, orientation and routing, mobile viewing, and discovery.
If you choose a creator-operated encoder for the test, account for the machine and connection that must remain available, and make sure someone can see whether the broadcast is still running. If you choose an uploaded-file scheduler, verify what happens at the end of a file, on a reconnect and when a schedule reaches a plan limit. In either case, avoid changing the stream format after starting; YouTube says vertical format cannot be added after the stream has begun.
Once the exact workflow has been demonstrated, record the tested settings: source file shape, selected stream route, destination channel, start procedure and how you verified the mobile result. That note is more useful than a generic claim that a tool “supports YouTube”, particularly if another person has to restart or reproduce the channel later.
Before committing, compare the operating options on the pricing page. When the file and channel are ready, start free — 24-hour trial, no card.
FAQ
Does Livepush support prerecorded YouTube loops?
Livepush’s help and product pages describe prerecorded playlists and continuous looping, including a 24/7 schedule channel on the Creators plan. Check the current plan details and any duration conditions with Livepush before relying on a particular schedule.
Can a Livepush loop stream in portrait 9:16?
The sources reviewed do not confirm that Livepush can send its prerecorded loop as a 9:16 YouTube vertical live stream. Ask Livepush specifically about portrait output and routing through YouTube’s vertical stream key before building around it.
Will a Livepush loop appear in the Shorts live feed?
That is also unverified. YouTube says viewers can find vertical live streams while browsing Shorts on mobile, but the reviewed sources do not establish that a Livepush loop is recognised for that surface, and no feed placement is guaranteed.
Can I add vertical format after the stream starts?
YouTube says vertical format cannot be added after a stream has started, so configure and verify the format beforehand. Test the stream before relying on it for a scheduled or continuous channel.