To add a local video in XSplit Broadcaster, choose Add Source > Video File, then right-click that source and open its properties. You can find playback controls there, but the official guidance reviewed does not establish a current loop-checkbox label or promise that repeating a file will make its picture or sound join seamlessly.
Treat these as two separate jobs: configure the source to repeat, then prepare and test the file’s end-to-start transition. XSplit’s documented options can help you manage playback; they cannot make mismatched frames or audio disappear at the boundary.
Add the local file with Video File
Open the scene where you want the clip to appear and use Add Source > Video File. XSplit describes this source as a way to add video files in different formats to a scene. Its media-source guide names common types including MP4 and WebM, but that does not mean every codec, profile or file variant will work. If a file fails to load, check the file and its encoding rather than assuming the source menu is missing.
Choose the file you intend to play, then confirm that it appears in the scene and plays as expected. For a devotional channel, that may be a prepared bhajan video; for a study or ambience channel, it could be a long visual with a music bed. The source is local to the computer running Broadcaster, so the file needs to remain accessible there while you test and stream.
If you are preparing a continuous service rather than configuring just this source, first make a written inventory of the videos, order and intended duration. That helps distinguish a source problem from a playlist-ending problem. For the latter, see what happens when a 24/7 stream’s source playlist ends.
Do not confuse adding a file with establishing that its loop works. A clip can load and play once while the repeat control is absent, unavailable, or named differently in your installed version. Confirm the playback behaviour in the scene before relying on it for a long broadcast.
Open the source’s properties
Once the video source is on the scene, right-click it and open its properties. XSplit’s support guide identifies a Playback area for managing the file’s playback settings. The guide’s text does not give a complete current inventory of the controls, so treat the panel you see in your installation as authoritative for its exact wording.
Check that you have opened the properties for the intended video rather than another layer or source. A scene may contain a background, an overlay and more than one clip; changing the wrong item can make it seem as though a setting has no effect. Selecting the source in the scene first, then checking the file preview or name in its properties, reduces that risk.
The XSplit guide’s summary is that playback controls let you control a video or audio file’s playback settings. That is a useful description of the area, not evidence that every version exposes the same controls or that a particular setting creates a seamless wrap. Keep a note of your Broadcaster version and the control labels you actually see if you need to repeat the setup later.
You can also confirm the file itself plays through before investigating repeat behaviour. A source that fails halfway through, stutters, or loses audio has a different problem from one that plays correctly but pauses or jumps when it reaches its end. Make one change at a time and observe which problem remains.
Identify the linked Media Source
In the properties window, look for the Media Source selector. XSplit documents it as the way to change the file linked to that properties window. This matters when a scene has several similar clips: a setting may be attached to the source you selected, while the file name shown in the properties belongs to another item.
Before changing playback settings, verify that the selector points to the intended local file. If you replace a file or select a different source, test again; do not assume that settings, timing or visual composition from the previous media will transfer as intended. A short, deliberate check now is easier than discovering during a scheduled broadcast that the scene is showing the wrong clip.
If you are repeating one file, a Video File source is the direct starting point. If you are managing several clips in a continuous sequence, XSplit describes Video Playlist as a source with continuous playback and other playback options. For multiple images or videos as a visual element, its Media Slideshow description says it can loop those items. These source types serve different jobs, and the descriptions do not establish gap-free transitions.
| Need | Source to consider | What XSplit’s material supports | What it does not establish |
|---|---|---|---|
| Repeat one local clip | Video File and its Playback properties | Adding a local video and managing playback; historical release notes mention loop options | A current checkbox label or seamless picture and sound at the boundary |
| Play several clips as a sequence | Video Playlist | Continuous playback and other playback options | Gap-free transitions or identical behaviour in every version |
| Cycle several images or videos visually | Media Slideshow | XSplit describes it as able to loop multiple images or videos | Seamless transitions or suitability for every playlist workflow |
Choose based on whether the job is a single file, a sequence, or a visual slideshow. If your channel’s plan depends on several items playing in a precise order, a playlist is more appropriate to investigate than treating each file as an unrelated source. Keep your source choice and content plan aligned.
Review the available Playback controls
With the intended media source selected, inspect the controls under Playback. Look for the controls available in your installed version and read their labels in context. The support text confirms that this area governs playback settings, but does not enumerate a current set of labels. This article therefore cannot reliably tell you to click a checkbox with a particular name.
Broadcaster’s release history says loop options for each video source and each Video Playlist item were added in Broadcaster 3.0, in a feature entry dated June 2017. That establishes that looping has appeared in the product’s history. It does not verify where a control sits today, how it is labelled in your version, or whether its behaviour has remained unchanged. The history is useful context, not a current UI walkthrough.
If you see an option that clearly indicates repeat or looping, use the control as presented in your version and test it with the clip. If you do not see one, check the current official support material and the release notes for your installed version before concluding that the feature is absent. Avoid applying instructions from an old screenshot by matching position alone; controls can move or change between releases.
When you stream through XSplit, the source behaviour is one part of a larger setup. Your YouTube live copyright checks for compilations and loops are separate from whether a source repeats technically. A loop setting does not determine whether you have permission to use the media or whether YouTube will accept a broadcast. Check the current official YouTube guidance for your circumstances.
Check the documented loop control in your version
The practical question is not simply “where is the loop box?” It is whether your version offers a repeat control for the selected source and whether it behaves as you need. The official material reviewed leaves current wording unverified. When the UI is unclear, record the Broadcaster version, source type and visible Playback controls, then consult XSplit’s current support documentation rather than guessing at a label.
XSplit’s product descriptions distinguish the Video Playlist and Media Slideshow from a single Video File source. The playlist is presented for continuous playback of multiple videos, while the slideshow is described as looping multiple images or videos. Those descriptions can guide your choice, but they do not promise that one item will transition to the next with no interruption. Test the precise source type you plan to use.
There is a useful difference between “repeat the same file” and “keep a channel’s programme moving”. The first concerns a file’s playback behaviour. The second may require a playlist, a deliberate item order and a decision about what happens when the final item ends. If you are weighing a computer-based setup for a long-running channel, this dedicated-PC budget guide may help frame the operational trade-offs without changing how you verify XSplit controls.
For an always-on channel, also ask what needs to stay powered, what you will monitor, and how you will recover if a local machine stops. StreamNeo removes the need to leave your own computer running for a prepared-file broadcast, which addresses the specific burden of maintaining a local machine overnight; it does not change the need to prepare the media or check YouTube’s current rules.
Test the transition between repetitions
A repeat setting only tells the source to play again. It does not edit the file’s last frame, first frame, last audio sample or first audio sample. If the clip ends on a bright frame and begins on a dark one, the cut remains visible. If the music resolves and restarts on a different beat, the restart remains audible even when playback repeats as configured.
Make a test scene or use a time when you can watch the wrap point. Play the file to its ending and observe the start of the next repetition. Check both picture and sound, including the moment immediately before and after the boundary. A visual transition can look continuous while a click or gap remains in the audio; a smooth audio bed can still accompany a noticeable jump in the image.
If the boundary is distracting, address the media itself. You may need to trim the beginning or ending, choose a different in-point, or edit the clip so its final visual composition and audio lead naturally into its opening. These are general video-production steps, not special XSplit controls. The appropriate edit depends on the content: a static rain scene may tolerate a different boundary than a close-up of a singer or a beat-driven lofi animation.
Test the rendered scene, not just the source preview. Transforms, overlays, captions or scene changes can make a boundary look different in the complete output. If you use a Video Playlist, test the transition between two different items as well as a single clip repeating; continuous playback is not the same as a guarantee of gapless output.
For a 24/7 YouTube channel, a local playback test is not a substitute for checking the live output. Once you have verified the source and the boundary, monitor a short private or otherwise appropriate test broadcast using YouTube’s available controls, then confirm that the received stream matches what you saw in Broadcaster. YouTube features and account requirements can change, so consult the current official Help pages rather than relying on an old setup note.
Troubleshoot black video separately from seams
A black source is a display or processing problem, not evidence that the loop failed. XSplit’s troubleshooting guide for sources that display black suggests switching video processing to Prefer GPU. It also describes unchecking Use Media Foundation Engine for video playback, with the qualification that this option is available only when video processing is set to Prefer GPU.
Treat those as troubleshooting steps for black video, not as methods for smoothing a loop. Change one setting at a time, then reopen or test the source so you know what changed. If the source is still black, consult the current XSplit instructions and check whether the file itself plays outside Broadcaster. The guide does not claim these steps fix a visible or audible seam.
Other symptoms need their own diagnosis. A frozen image, missing audio, an unsupported file or a visible jump at the repeat boundary are not interchangeable problems. Confirm the file works, check that the intended Media Source is selected, and note whether the failure happens during ordinary playback or only when the file repeats. That distinction will make a support question more useful and reduce trial-and-error changes to a working scene.
For a black picture with otherwise audible playback, focus first on the source display guidance. For a sound click at the wrap, listen to the media boundary and inspect the edit. For a pause between playlist items, test the playlist path rather than assuming the one-file repeat behaviour applies. Troubleshooting becomes more reliable when each symptom is matched to the relevant part of the setup.
XSplit’s official sources cited here are Image, Video, and Audio Source, Sources Menu - Introduction, its Broadcaster feature history, and Fixing Sources That Only Display Black. Review the relevant current page for your version; the support material and feature history do not certify seamless loops.
If you would rather avoid leaving a local computer responsible for a prepared-file stream, compare the operating options on the pricing page. When the file and channel are ready, start free — 24-hour trial, no card.
Before committing, compare the operating options on the pricing page. When the file and channel are ready, start free — 24-hour trial, no card.
FAQ
How do I add a local video file in XSplit Broadcaster?
Choose Add Source > Video File and select the local clip. Then confirm it plays in the scene and open its properties by right-clicking the video source. XSplit lists common formats such as MP4 and WebM, but not every codec or file variant is guaranteed to work.
Where are the playback settings for a video source?
Right-click the source and open its properties, then inspect the Playback area. XSplit describes that area as controlling file playback settings. The official text reviewed here does not list a complete current set of control names, so use the labels shown in your installed version.
Does looping guarantee a seamless YouTube video loop?
No. Repeating a file does not edit its final and opening frames or audio, and the official guidance reviewed does not promise a seamless boundary. Test the wrap and revise the media if the visual or sound transition is noticeable.
What should I do if the source is black?
Follow XSplit’s black-source troubleshooting guidance, which includes trying Prefer GPU and, when that mode is selected, unchecking Use Media Foundation Engine for video playback. These are display troubleshooting steps, not loop-seam fixes; check the current XSplit page for your version.