To repeat a YouTube playlist, open a video from that playlist and switch on its Repeat or Loop control. The control is different on a computer, TV and mobile, so check the device that is actually playing the videos.
Choose playback quality by observing whether that device buffers, not by assuming an Airtel broadband plan guarantees a particular resolution. Playlist repeat cycles videos, but it does not create a YouTube Live broadcast or prevent YouTube’s “Continue watching?” prompt.
Turn on Repeat for the playlist you mean to play
First open the playlist itself and start a video from within it. Repeat applies to the selected playlist when that playlist is active; it is not the same as asking YouTube to choose a related video after the current one ends. If you started from an individual video or a recommendation queue, find and open the intended playlist before changing a repeat setting.
YouTube uses different labels and controls across its apps. On a computer, look for Loop in the expanded playlist panel. On a TV, use the remote or controller to expose playback controls and select Repeat until the mode identifies the playlist. On mobile, play the playlist and use the loop control in its playlist control box. If you cast from one device to another, verify the repeat state on the endpoint that is playing rather than assuming the phone’s screen tells the whole story.
Repeat and Autoplay solve different problems. Repeat takes the chosen set of videos back to its beginning when it reaches the end. Autoplay can start another video after playback, but that next video may be a recommendation rather than an item in the playlist you selected. For a devotional sequence, a set of study recordings or an ambience playlist, use Repeat for the playlist and check what the player says before leaving it.
A quick test helps catch a mistaken mode: inspect the repeat indicator, then move through a few items or let the last item finish while you are present. Confirm that playback returns to the first playlist item, rather than repeating just one video or moving to an unrelated recommendation. Do this before relying on the setup for a long listening session.
Loop a playlist on a computer
On a computer, open the playlist and start one of its videos. Expand the playlist panel beside the player if it is collapsed, then select Loop in that panel. The setting should indicate that the playlist is being repeated. If you cannot see the control, make sure you are viewing the playlist queue and not just a single video page.
Do not confuse playlist Loop with the player’s single-video Loop option. YouTube also offers a way to repeat an individual video from the player context menu. That is useful when you want one recording to start again, but it does not cycle through a playlist. For several bhajans or lessons in sequence, the playlist panel is the relevant place to check.
To choose the computer’s playback quality, open the player’s Settings, then Quality. You can leave quality on Auto or select a resolution that is available for that video and device. Availability may vary with the uploaded source and browser support; a resolution missing from the menu does not necessarily indicate a fault with the Airtel connection. YouTube explains that quality selection is affected by connection speed, screen size, source quality and browser support in its video quality help.
If you are setting up a dedicated computer to play an always-on playlist in a room, distinguish that local playback job from a live broadcast. A computer can keep a playlist playing for people in the room while its browser remains active, but other YouTube viewers are not watching a new Live event just because the playlist is looping. For a separate approach that does create a live stream from a playlist, see how a headless Linux computer can host an always-on YouTube playlist; that involves a different setup and its own maintenance.
Set playlist repeat on a TV
Start the playlist in the YouTube app on the smart TV or game console. Press down on the remote or controller to show playback controls, then choose Repeat until the displayed mode reads Repeat • Playlist. If it reads Repeat • Currently playing, only the current video will start again. Cycle the control until the playlist mode is selected, then check that it remains selected when you return to the video.
TV interfaces can make setup less obvious than a computer because the playlist queue and controls may be tucked behind the remote’s playback overlay. If Repeat is not visible, make sure the playlist is open and playback has started, then bring up the controls again. Avoid relying on a phone or TV app setting from a different session: verify the mode on the television that will be left playing.
If the TV app itself is stuck, separate an app problem from a network problem. Reopen YouTube; if that does not help, sign out and back in, restart the TV or console, and check whether its software needs an update. YouTube’s troubleshooting guidance for streaming and video issues also suggests testing another way to watch. As a conditional fallback, a laptop connected to the TV with an HDMI cable for connecting a laptop to a TV can help identify whether the TV app is the difficulty. The cable is not needed to loop a playlist, does not improve Airtel broadband, and is not a guaranteed remedy for Wi-Fi buffering.
A TV can be comfortable for a shared room, but it is not necessarily the easiest device for troubleshooting. When the app’s controls or playback behave oddly, test the same playlist on a computer or mobile device. If another endpoint plays normally while the TV app does not, focus first on the TV app, device software or its network path.
Loop from a phone or tablet, including casting
On a phone or tablet, play the playlist, then open its playlist control box and tap the Loop control. Check that the playlist, rather than a single video, is repeating. The control may not look exactly like the one on the computer, so do not assume that a setting shown on another device has carried over.
Casting introduces a second device into the playback path. YouTube supports casting from its mobile app to a TV, and its casting help explains how to connect. With computer casting, the computer and TV or streaming device should be on the same Wi-Fi network; phone or tablet casting can also use a TV code when the devices are not on the same Wi-Fi. Check the instructions for your particular casting route, then verify Repeat at the endpoint actually showing the video.
Autoplay settings may differ from one device to another. If the playlist stops, look at the active player rather than expecting a phone’s setting to control every TV or casting session. Also remember that casting changes how playback reaches the screen, not what playlist repeat means: it still cycles the playlist and does not turn it into a live broadcast.
Choose quality by watching for buffering
There is no Airtel-specific resolution that can be prescribed from the information available here. A plan name or advertised speed does not establish the actual connection at the TV, the quality of the Wi-Fi signal in that room, or the performance of other devices using the network. Start with Auto if playback is steady. If the video repeatedly pauses to buffer, try a lower available resolution and observe whether it becomes consistent.
YouTube recommends a minimum connection speed of 7 Mbps for HD streaming on TV. Treat that as YouTube’s recommendation for HD on a television, not as a guarantee for a particular Airtel service, home, router or period of the day. YouTube’s connection-speed recommendation does not certify an Airtel plan, and the connection actually available at the playback device matters.
Check the network where the TV or streaming device sits. Run a speed test close to it, see whether it is within useful router range, and consider walls or interference between the router and the device. If several people are using the connection for downloads or video at the same time, reduce competing network use as a test. If a lower quality stops the buffering, keep that setting for this session; if it still buffers, investigate the connection or device rather than repeatedly changing resolution.
The most useful quality is the highest available setting that plays reliably on your actual endpoint. A large television may make lower-resolution source material more noticeable, while a smaller screen can be more forgiving. The source upload also limits the available options: YouTube cannot offer a resolution the video does not have, and some devices or browsers may show fewer choices. If a menu lacks a setting, compare another video or playback device before concluding that the broadband is responsible.
Use a simple sequence: check the selected video is playing, note the current quality, and observe whether it pauses. If buffering continues, lower quality one step and give playback time to settle. Then check Wi-Fi strength at the TV and other network use. If the TV alone fails but another device plays smoothly in the same place, troubleshoot its app or connection; if several devices struggle, measure the connection and check Airtel account details directly. A guide to running a 24/7 devotional music stream from a VPS in India covers a different broadcast arrangement, rather than a way to diagnose home Wi-Fi.
Understand inactivity prompts and playback limits
Playlist repeat does not guarantee uninterrupted unattended playback. YouTube may pause autoplay and ask “Video paused. Continue watching?” after 30 minutes on mobile, 60 minutes on web, or 180 minutes on TV of uninterrupted autoplay. These are timings described by YouTube Help, not promises that a prompt will appear only at those points or a setting to disable it. Check YouTube’s current explanation of the Continue watching prompt for the applicable behaviour.
The prompt is separate from a buffering interruption. Buffering means the player is waiting for video data; an inactivity prompt asks for confirmation that someone is still watching. Lowering playback quality can help with an unstable connection, but it does not answer the prompt. Likewise, repeat can bring the playlist back to its first item without confirming that a person is present.
For a household watching a playlist, the practical response is to notice the prompt and confirm playback when appropriate. If the device is meant to play unattended, build the possibility of a pause into your expectations and test how the YouTube app behaves on that device. Do not assume that a setting on a computer changes the app’s behaviour on a television or phone.
A station that needs to be available to remote viewers around the clock has a different requirement from a TV left on in a shop or prayer room. Review YouTube’s current guidance and your intended viewing arrangement before treating a browser playlist as a continuous service. For a channel owner considering a live broadcast rather than local playback, a playlist stream that runs without a PC in India discusses the distinction and the need to plan for an actual YouTube Live stream.
What playlist repeat does—and does not—do for a 24/7 channel
A repeated YouTube playlist is a playback setting for a viewer. It tells a device to cycle the videos in that playlist. It does not publish a YouTube Live broadcast, create a live event for subscribers, or make the playlist continuously visible as a live channel to people elsewhere. If the goal is background viewing on one TV, repeat may be enough when someone is available to deal with prompts. If the goal is a 24/7 YouTube channel, you need a broadcast workflow, not just the Repeat control.
That distinction matters for a local business, devotional channel or study station. A television in a reception area can play selected videos for people in that room; a YouTube Live stream is a separate broadcast that remote viewers can open as a live programme. The former depends on the playback device and its app staying active. The latter requires you to prepare and run a live stream, and it remains subject to YouTube’s rules and platform behaviour. Neither arrangement should be described as guaranteed to run without interruptions.
StreamNeo can remove the need to leave your own computer running when the specific problem is turning an uploaded video into a YouTube Live broadcast, but a local YouTube playlist on a TV remains a different use case. It does not change the TV’s repeat setting, Airtel connection or YouTube inactivity prompt. Choose based on whether you need in-room playback or a broadcast for remote viewers, and check the current platform guidance for the setup you intend to use.
If you are only trying to keep a family playlist cycling, set Repeat • Playlist, choose a quality that behaves consistently, and plan to respond if YouTube pauses. If viewers outside the room must see a continuing live programme, research a proper broadcast workflow and test it before relying on it overnight. Do not treat a playlist loop as evidence that a live channel is running.
Before committing, compare the operating options on the pricing page. When the file and channel are ready, start free — 24-hour trial, no card.
FAQ
How do I loop a YouTube playlist on my TV?
Start the playlist, press down on the remote to show the controls, and select Repeat until it shows Repeat • Playlist. If it says Repeat • Currently playing, the TV will repeat only that video. Test the mode before leaving the playlist unattended.
What quality should I set to stop YouTube buffering on Airtel broadband?
There is no single quality setting guaranteed for every Airtel connection or home. YouTube recommends at least 7 Mbps for HD streaming on TV, but your actual Wi-Fi and connection at the device matter; if playback buffers, try a lower available resolution and check the network beside the TV.
Why does YouTube ask if I am still watching?
YouTube can pause autoplay and ask for confirmation after a period of uninterrupted playback: its help page lists 30 minutes on mobile, 60 minutes on web and 180 minutes on TV. Playlist repeat does not bypass that prompt, which is distinct from buffering.
Does repeating a playlist make my channel live 24/7?
No. Repeat cycles a playlist on the device playing it; it does not create a YouTube Live broadcast for remote viewers. A 24/7 channel needs a live broadcast workflow, and it should be tested and monitored rather than assumed to run without interruption.