You can set a YouTube live stream to send viewers to a Premiere when the live event ends. Schedule the Premiere first, then configure the source event’s Redirect setting in YouTube Studio; scheduling the encoder event and setting the redirect are separate steps.
YouTube’s published instructions describe a general workflow and eligibility rules, but do not settle whether the feature is available in India specifically. They also do not promise recurring redirects or unattended continuity for an always-on channel, so check the controls in your own Studio account and plan the handoff as a distinct event.
Schedule the encoder stream in Live Control Room
First create the destination Premiere. Then create or schedule the live event that will act as the source. The order matters because the destination needs to exist before you can select it in the source event’s redirect settings. YouTube’s Live Redirect instructions describe this setup sequence.
In YouTube Studio, open Create and choose Go live to reach Live Control Room. Set up the live event with its title, visibility, description, thumbnail, audience settings and scheduled time. If you use an encoder, select the stream setup appropriate to your workflow and keep the event available in Studio for later editing. The exact labels can change, so follow the current controls rather than relying on an old screenshot.
Scheduling an encoder event does not mean your encoder has already connected, nor does it start a redirect. A scheduled event is the destination-independent container for the broadcast. You still need to send a valid video signal at the planned time, and you separately select what should happen to viewers when that event ends.
For example, a bhajan channel might schedule a live evening introduction and performance, then create a Premiere of a longer devotional programme as the destination. The Premiere can be public and scheduled for an appropriate time, but the creator should check how its timing relates to the live event’s expected end. A destination that is not available in the picker cannot be selected just because it was mentioned in the description.
Keep event identity clear. The source title and thumbnail should tell viewers what they are watching now; the destination’s title and thumbnail should identify what comes next. You can use a separate thumbnail workflow for a 24/7 music stream as a reminder that persistent artwork needs to remain legible at small sizes, though Live Redirect itself is configured in Studio rather than through thumbnail settings.
Connect the encoder and start the event
At broadcast time, open the scheduled event in Live Control Room and connect the encoder using the stream details shown there. An encoder may be OBS or another supported application. Wait for YouTube to recognise the incoming signal, inspect the preview, and start the event using the controls in Live Control Room. If the event is meant to lead into a Premiere, leave enough time for the live portion to end deliberately rather than cutting it off while viewers are still listening.
A scheduled start and a live start are not necessarily the same action. Depending on the event configuration, sending video to YouTube and pressing the control to go live are separate parts of the process. Confirm the event is actually live before promoting it as live, and verify the audio and picture from the viewer-facing page as well as the encoder preview.
If a loop or recorded segment is feeding the encoder, test how it behaves before the event. The practical concern is whether the source continues playing, not whether Redirect can repair it. For a church broadcast, troubleshooting notes on OBS stopping while looping video may help isolate the encoder side. Live Redirect only determines the destination after the source event ends; it does not keep an encoder running or restore a failed source.
During the live event, keep a person responsible for ending it at the right moment and checking that the selected destination is still appropriate. This is especially useful when the schedule can move: a service may run long, a news loop may need an urgent update, or a host may want to answer a final question before the Premiere begins. A redirect configuration is not a substitute for that editorial decision.
Configure the end-of-stream Redirect
Once the Premiere is created and the source event exists, edit the source event in YouTube Studio. Open Content, then Live, select the source event and choose Edit. In the event’s Customization area, locate Redirect, choose Add, and select the destination Premiere. Save the change and revisit the event to confirm the chosen destination is shown.
This setting belongs to the source live event. It tells YouTube where to direct viewers after that event ends; it does not schedule the encoder, initiate the broadcast, or create a repeating rule for future streams. For each separate event, check that the intended destination is attached to that specific source. Do not assume a setting from last week carries over to a newly created event.
YouTube documents redirecting from a live stream to a Premiere or another eligible live stream, and also describes guiding Premiere viewers to a live stream. For the direction in this article, the source is the live stream and the target is the Premiere. YouTube’s Premiere guide covers creating a Premiere and points to Live Redirect as a way to guide viewers onward.
The picker is a useful check, but it is not proof of universal availability. It will show destinations that are available to the account under the current conditions. If your own upcoming Premiere does not appear, check that it has been created and is in a suitable upcoming state, that you are editing the correct source event, and that you have saved the Premiere’s settings. For a different channel’s live stream, permission is an additional condition discussed below.
Meet sender eligibility
The current YouTube Help instructions say the channel sending a redirect must have more than 1,000 subscribers and no Community Guidelines strikes. This is the sender rule: it applies to the channel whose source event is directing its audience elsewhere. It is not the same as the recipient channel’s permission setting.
Check the current YouTube Help eligibility and setup page before making plans around a particular account. Account controls and platform policy can change, and a general help page cannot confirm what options will appear on your individual event. If the Redirect option is missing, first verify sender eligibility, then check that you are editing a live event rather than a different content item.
The research available for this guide does not establish an India-specific exception or guarantee. The official feature guidance gives general eligibility and setup instructions but does not say that India is supported or excluded as a country. That is a limit in what the documentation establishes, not a reason to claim that every Indian account has the feature or that none do. Check your own account’s current Studio controls and consult YouTube’s latest official guidance if the option is absent.
Confirm destination permissions
A Premiere on your own channel is different from a live stream on someone else’s channel. For another channel’s live stream to appear as a destination, that receiving channel must permit your channel to redirect viewers to it. You can ask the recipient to review the redirect permissions in its own Studio settings before you schedule the handoff.
YouTube describes recipient approaches that can allow redirects from subscribed channels, from all channels, or only from specifically approved channels. The recipient chooses the policy; you cannot change it from the source channel. If the destination owner uses an allow-list, they need to include your channel. Confirm the permission directly rather than treating a verbal plan or a shared event link as evidence that the destination will be selectable.
When a destination is missing, check the basics together: is it an upcoming Premiere or an active or upcoming stream, is it on the channel you expect, and has the receiving channel permitted the redirect? Then refresh the event editor and inspect the picker again. A missing destination may reflect eligibility or permission, not a problem with the encoder.
A recipient can receive redirects without meeting the sender’s subscriber threshold according to YouTube’s announcement; the threshold in the Help instructions is a rule for the channel sending viewers. Because the practical distinction matters, confirm the latest wording in the current Help Center page and ask the recipient to verify its settings. Neither step is a guarantee that the destination will appear in every account’s interface.
Plan viewer communication and reload time
A redirect is an autoplay handoff after the source event ends. YouTube advises allowing a few seconds for screens to reload. Tell viewers in advance that they should wait briefly at the end rather than closing the page as soon as the stream stops. The guidance does not specify that every viewer will experience an identical transition.
Autoplay settings matter. TeamYouTube’s Live Redirect announcement explains that viewers who have autoplay disabled may need to click play. So make the destination visible in your live description or closing remarks as a fallback, and give viewers its title so they can find it if the automatic handoff does not happen for them.
A short spoken cue can be enough: “When this stream ends, wait a moment for the programme to open. If it does not, use the link in the description and press play.” For a Hindi-language channel, say the same in the language your audience uses, and avoid promising a seamless switch. If the Premiere has a scheduled start, tell viewers its expected timing in plain terms so they are not left wondering whether the stream has ended early.
Do not treat a successful redirect as a measured retention result. The official materials explain the feature behaviour, not how many viewers will follow, how long a reload takes for every connection, or whether viewers will remain for the next programme. A local test with your own event setup can help you understand the visible flow, but it cannot establish what every viewer will see across devices and settings.
For a channel that runs a long loop, keep the redirect’s role narrow: it is the transition at the end of one source event. Separate operational questions such as recovering a stream after an encoder crash need their own monitoring and recovery plan. Redirect cannot repair the source stream while it is still meant to be live.
Limits of scheduling a 24/7 channel
You can use a scheduled live event as one part of a programme sequence, but the documented Redirect workflow does not create a recurring schedule. It does not say that one redirect can be applied automatically to every future encoder event, nor that an event will be repeatedly restarted and handed off without a person checking it. Configure and verify each source event on its own terms.
Likewise, scheduling is not unattended continuity. An encoder can fail to connect, a computer can lose power, the source file can stop looping, or the broadcast can end at an inconvenient time. Live Redirect is triggered by the end of the source event; it is not a guarantee that the stream remains live until the intended handoff, and it does not restart a failed encoder. A 24/7 OBS playlist setup has a different operational problem to solve: keeping the source and encoder running over time.
If you need a sequence of a short live introduction followed by a Premiere, use an explicit run sheet. Record the source event title, scheduled time, destination title, permission check if another channel is involved, person responsible for ending the stream and viewer message. Before going live, confirm that the Premiere is still the right destination. After the live portion, end the event intentionally and watch for the expected handoff from a viewer-facing device.
For a channel whose computer being switched off is the underlying concern, StreamNeo removes that specific burden by turning an uploaded video into a YouTube live stream that can continue without your computer running. That addresses continuous delivery of a prepared file, not YouTube’s eligibility or destination-permission rules, and it does not make a Premiere redirect recurring or guarantee a handoff. Keep those platform settings as a separate part of your workflow.
If the workflow must happen repeatedly, decide who will create or inspect each event and redirect rather than assuming that scheduling solves the operational work. Keep a fallback destination link available, tell viewers what to do if autoplay does not transfer them, and check the current YouTube documentation when controls change. A practical run-through can reveal an unclear title or missing permission before a real audience depends on it, but it cannot promise uninterrupted service.
Before committing, compare the operating options on the pricing page. When the file and channel are ready, start free — 24-hour trial, no card.
FAQ
Can a YouTube live stream redirect viewers to a Premiere?
Yes. YouTube documents selecting a Premiere as the destination for a live stream’s end-of-stream redirect. Create the Premiere first, then edit the source live event in Studio and select it under Customization > Redirect.
Does Live Redirect work in India?
YouTube’s reviewed Help instructions provide general eligibility and setup guidance but do not resolve India-specific availability. Check whether the controls and destination appear for your account in Studio, and consult current official guidance rather than treating the documentation’s silence as a country-level guarantee.
Why can’t I see another channel’s live stream in the destination picker?
The receiving channel must allow redirects from your channel, and the destination must be in an eligible available state. Ask the recipient to check its Studio permission settings, then confirm you are editing the correct source event and inspect the picker again.
Will viewers move automatically when the live stream ends?
YouTube describes an autoplay handoff and recommends allowing a few seconds for screens to reload. Viewers with autoplay disabled may need to press play, so tell them what destination to look for and provide a fallback link.