You can repeat a YouTube playlist from its playlist controls, but the control is not in the same place on every device. On a phone, start a playlist and tap Loop in the playlist control box beneath the video; on a computer, use Loop in the expanded playlist panel; on a TV or console, choose Repeat • Playlist while playback is active.
A loop icon with a “1” means that only the current video will repeat. If you cannot see a loop or repeat control, first check that you started playback from a playlist and are looking at the playlist controls, not the video player’s single-video loop option.
Check that a playlist is playing
The first question is not where the button is, but what YouTube is playing. A video opened by itself and a video playing as part of a playlist can have different repeat controls. The distinction matters because a control that repeats one video does not necessarily repeat the list you selected.
Open the playlist you want to hear or watch, then start playback from that playlist. You might begin from a saved playlist in the app or from a playlist page. While a video is playing, look for evidence that the playlist is active: the playlist’s videos or controls should be available alongside or beneath the player, depending on the device. If playback began from an individual video page, return to the playlist and start it there before looking for playlist repeat.
YouTube Help describes the feature as a way to “play a video or playlist on repeat by looping it”. That wording covers two different actions: repeating one video and repeating the whole playlist. The control and indicator you see depend on which action is selected, and the interface varies across mobile, computer, television and console.
If you need to find a saved list in the Android app, YouTube’s playlist instructions explain how to find and manage playlists. The app’s layout can change, so use the playlist itself as the starting point rather than assuming every device has the same tabs or buttons.
For a channel owner, this guide is about repeating ordinary YouTube playback, not keeping a live broadcast running. A playlist playing in the app is different from an always-on live stream that viewers open on a channel. If you are building a long-running channel, the separate guide to keeping a church stream from showing an offline screen between loops deals with the broadcast-side problem.
Find the Loop control in the app
On the YouTube mobile app, start playing a playlist and inspect the playlist control box beneath the video. Tap Loop there to repeat the full playlist. You may need to bring the playback controls into view or scroll the page to reach the box; the important point is to use the playlist control box rather than a control intended for the current video alone.
YouTube’s Android help page for looping videos and playlists gives the documented path: play a playlist, then use Loop in the playlist control box below the video. The help page is a guide to the feature, not a guarantee that every version presents the same layout or wording in precisely the same place.
If the video is minimised or the app has moved to another screen, return to the active player first. A playlist repeat toggle is easier to identify when you can see both the video and its playlist controls. Make sure you are tapping the control attached to the playlist, not an icon in a separate menu that only affects the current video.
Once you tap Loop, give the icon a moment to show its selected state. The exact appearance can vary, so do not rely solely on colour or position. The useful distinction is whether the loop icon includes a “1”: that mark indicates repeat for the current video, not the whole playlist.
If the list is not already open, go back to the playlist and begin playback from there. Then look beneath the player again. This simple check keeps you from treating a missing playlist control as evidence of a fault when you may be watching a video outside the playlist context.
Switch between playlist and video repeat
Playlist repeat and single-video repeat are related but not interchangeable. With playlist repeat enabled, YouTube returns to the first item after the final item. With single-video repeat enabled, the current item starts again instead of moving on through the rest of the list.
On mobile, tap Loop once to repeat the playlist. Tap the same Loop control again to switch to repeating only the current video. YouTube indicates the single-video state by adding a “1” to the loop icon. If you do not want one track or clip to play continuously, check for that marker and tap again to return to playlist repeat.
The icon’s state is more useful than the mere presence of a loop symbol. A loop symbol without the “1” represents the playlist state in the documented mobile instructions; a loop symbol with “1” represents the current-video state. If the interface uses a label instead, read the label before leaving playback.
On a computer, the distinction is especially easy to miss because the player itself has a Loop action. Right-clicking the video and choosing Loop repeats that one video. To repeat the list, expand the playlist panel beside the video and choose Loop inside the playlist box. The same idea applies on TV and console: read the Repeat label and select the playlist mode rather than assuming a generic repeat toggle has the desired scope.
A practical check is to watch what happens when the current item ends, if you are able to do so. Playlist repeat should move through the list and then return to its beginning; single-video repeat should restart the same item. You do not need to change the playlist itself or duplicate its entries to use the built-in loop control.
Repeat a playlist on a computer
Open a video that belongs to the playlist and expand the playlist panel beside the player. In the playlist box, click Loop. That control is the one intended to repeat the playlist. The computer instructions from YouTube Help also distinguish it from the player’s own Loop action.
If the panel is collapsed, look for the playlist next to the video and expand it. A narrow browser window can make panels less obvious, so widen the window or use the available playlist control to reveal the list. The action you need is inside the panel containing the playlist, not simply anywhere on the video.
Right-clicking the player and selecting Loop is a different option: it repeats only the video currently playing. This is useful when you want one lecture segment, song or ambience clip to continue, but it does not mean the whole playlist will cycle. If the same item restarts when it ends, check whether you selected the player’s Loop rather than the playlist box’s Loop.
For a quick confirmation, inspect the playlist panel before playback advances. The selected control should be associated with the list. If you are switching between browser tabs or have opened the video from a search result, make sure the video still belongs to the playlist whose controls you intend to use.
If your goal is to run a pre-recorded programme continuously as a channel broadcast, the browser’s playlist loop is not the same as a 24/7 live stream. The guide to rotating a YouTube live playlist from a JioFiber-connected PC covers a separate setup in which videos are used as broadcast material.
Repeat a playlist on a TV or console
On a television or gaming console, select the playlist and start a video from it. While playback is active, press down on the remote or controller to bring up playback options. Choose Repeat and cycle through the available states until the screen indicates “Repeat • Playlist”. That label is the clear sign that the whole playlist, rather than just the current video, is set to repeat.
Some TV and console interfaces also put the Repeat toggle under Settings during playback. The exact route depends on the app and device, so follow the label rather than expecting the mobile app’s Loop button to appear on screen. YouTube’s official looping instructions cover this TV and console approach as well as the computer procedure.
If the Repeat control shows a mode for the current video, continue selecting the control until it identifies the playlist. Avoid relying on a generic repeat icon without reading the accompanying text. A television interface may give you less room to see the playlist and player simultaneously, which makes the explicit mode label particularly useful.
Use the remote’s navigation controls slowly enough to confirm the selected item. If you exit the playback overlay, bring it back while the video is still playing and reopen Repeat or Settings. The goal is to select the playlist repeat state; repeatedly opening unrelated settings will not establish which mode is active.
If the Loop control seems missing
YouTube’s help pages explain where to find the documented controls, but they do not give a universal explanation for why a particular person might not see one. A missing control by itself does not prove an outage, account restriction, or any particular app or regional issue. Start with the playback context and the documented location before drawing conclusions.
Use this checklist:
- Start from a playlist. Open the list you want, then begin playback from it rather than from a standalone video.
- Look in the playlist area. On mobile, inspect the control box beneath the video; on a computer, expand the playlist panel; on a TV or console, open Repeat during active playback.
- Separate the player from the list. On a computer, the player’s right-click Loop repeats one video; use the Loop control in the playlist box for the list.
- Check the selected state. A “1” on the mobile loop icon means current-video repeat. On a TV or console, look for the “Repeat • Playlist” label.
- Return to playback controls. If an overlay has closed or you are on a different screen, bring up the active player’s controls and inspect the playlist options again.
If you still cannot find the control, consult YouTube Help for the device you are using and check the current app interface. The documented steps are a sensible place to look, not a promise that every interface will match the screenshots or wording. Avoid treating a refresh, reinstall or settings change as an official fix: the cited help instructions do not identify those as universal remedies for an absent control.
For channel operators, this distinction also prevents a different kind of troubleshooting detour. Repeating videos for your own listening is not the same as broadcasting a pre-recorded loop to viewers. If you are deciding whether a computer should run an extended broadcast, the guide to YouTube encoder settings for a 24/7 pre-recorded channel covers stream configuration rather than the app’s playlist repeat control.
A persistent interface difference is a reason to check the device-specific current instructions, not to assume a particular cause. You can also use another supported device to confirm whether the playlist itself is available, while keeping in mind that control placement and naming differ between devices. Do not infer that one device’s layout is the standard for all others.
If you are maintaining a continuous channel rather than simply looping a personal playlist, the operational concern is more than the visible repeat button. StreamNeo removes the need to leave your own computer switched on to keep an uploaded video broadcasting continuously, which addresses the specific problem of a home machine having to remain on through the night.
When the playlist behaviour is clear, keep the task in its right scope: use YouTube’s built-in control to repeat a list for playback, and evaluate a separate live-stream workflow only if you need viewers to watch a channel broadcast.
Before committing, compare the operating options on the pricing page. When the file and channel are ready, start free — 24-hour trial, no card.
FAQ
Why can’t I see the playlist Loop button in the YouTube app?
First confirm that playback began from a playlist, then inspect the playlist control box beneath the video. YouTube documents that location, but its help page does not identify one universal cause or guaranteed fix for a control that is not visible in a particular interface.
How do I know whether YouTube is repeating one video or the whole playlist?
On mobile, a “1” on the loop icon indicates that only the current video repeats; tap Loop again to switch modes. On a TV or console, look for the Repeat label and select “Repeat • Playlist” for the full list.
Does right-clicking Loop on a computer repeat a playlist?
No. The video player’s right-click Loop action repeats the current video. To repeat the playlist, expand its panel beside the video and click Loop in the playlist box.
Can I use the same playlist repeat control on every device?
The repeat feature is available across the documented app, computer, TV and console instructions, but the controls are not laid out identically. Use the device-specific path and confirm the selected mode rather than expecting one button placement everywhere.