If you want an Indian VPS for a 24/7 YouTube stream, the evidence here supports a shortlist, not a performance ranking. Inservers publishes a streaming VPS offer in New Delhi; Contabo lists VPS plans in Mumbai. Neither listing, by itself, proves sustained upload capacity or an enforceable commitment to relay your stream continuously.
Choose a plan only after matching its permitted outbound use to the bitrate and number of destinations you need. Treat location, specifications and prices below as provider-published information, then confirm the current written terms directly before buying.
What an always-on YouTube stream needs from a VPS
A VPS can run streaming software without leaving your home computer switched on, but it does not remove the need to understand the stream path. In a relay setup, an encoder sends a feed to the VPS and the VPS sends it onward to YouTube. In another setup, software on the VPS reads a stored video and creates the outgoing stream itself. These approaches have different CPU, storage and upload requirements, so first decide which one you intend to run.
For a simple relay of an already encoded feed, the server mainly needs to receive, maintain and forward the stream. If you plan to transcode, combine sources or add graphics on the VPS, the processor and memory workload rises. A plan with a large advertised network port does not tell you whether its CPU can handle your particular encoding settings, nor whether the provider permits continuous high-volume egress.
YouTube's live encoder settings guidance recommends RTMPS and provides bitrate guidance by resolution, frame rate and codec. It also recommends constant bitrate (CBR) and a two-second keyframe interval, with a maximum of four seconds. Use the current YouTube table for your actual output rather than copying a bitrate from a different resolution or codec.
A channel that loops devotional music or a study playlist may have a steady picture and audio profile; local news or a live camera can vary more. The VPS still has to carry the outgoing bitrate for as long as the stream runs. For a practical explanation of how a creator setup can depend on the source computer, see our guide to running a 24/7 study stream on a Chromebook.
Indian VPS shortlist: Inservers and Contabo
Inservers advertises a streaming VPS located in New Delhi, with a page describing RTMP relay to YouTube. Its listed entry offer includes 2 vCores, 4 GB RAM, 40 GB NVMe storage and a 1 Gbps unmetered uplink, with a starting price of ₹880 per month. These are Inservers' published specifications and price, accessed in 2026; they are not results from an independent sustained-upload test. Confirm the current plan, price and usage terms with Inservers before ordering.
Contabo's official location page identifies Mumbai as its India data-centre location and lists VPS configurations with vCPU, memory, storage and monthly prices. The page establishes that Mumbai is a listed location; it does not establish that a particular configuration is suitable for round-the-clock YouTube relay. Check the Contabo India location and VPS details for current configuration and pricing information, and confirm which terms apply to the plan and location you would buy.
The difference in how these offers are presented may help narrow your research: Inservers describes a streaming-specific use case, while Contabo's cited page documents an India location and general VPS configurations. That is not evidence that one has better throughput, more reliable service or more suitable support. No independent performance results or enforceable 24/7 relay commitments are established by the reviewed provider pages.
Do not treat “unmetered” or “1 Gbps” as a complete answer to the bandwidth question. Ask what outbound traffic is allowed, whether there is a fair-use policy or a sustained-rate limit, and what happens when a service exceeds any allowance. If the provider will not confirm that a continuous YouTube relay is acceptable, a published CPU and memory table cannot settle the most important policy question.
Compare locations and published specifications
Use a comparison table to separate what is documented from what still needs an answer. Published resources can help you check whether a plan is plausible for your software, but they do not describe the full network policy or guarantee an uninterrupted stream.
| Provider | India location on the cited page | Published offer information | Still to verify |
|---|---|---|---|
| Inservers | New Delhi | Streaming VPS entry offer: 2 vCores, 4 GB RAM, 40 GB NVMe storage and a 1 Gbps unmetered uplink; listed from ₹880/month | Sustained egress, transfer or fair-use rules, continuous-relay permission, support response and applicable SLA |
| Contabo | Mumbai | VPS configurations list vCPU, memory, storage and monthly prices | Which current plan and terms apply, outbound traffic policy, continuous-relay permission, support response and applicable SLA |
The Inservers details and starting price are provider-published and accessed in 2026; Contabo publishes its own current plan and price information on its site. Prices and plan details can change. Check each provider's own page at the point of purchase rather than treating this comparison as a live quotation.
Location is useful, but it is only one part of the route. A Mumbai or New Delhi VPS may be convenient for administration or for a source located in India, yet that does not establish the route's quality to YouTube's ingest endpoint or the experience viewers will have. Ask whether the provider can specify the relevant network and routing terms, then test from the exact VPS and region you plan to use.
Compare resources against your workflow, not against a neighbouring row in the table. A relay that copies a pre-encoded file or feed has different requirements from software that decodes and re-encodes video. Storage matters if the VPS holds a local video file, but it does not substitute for upload allowance. If your setup involves looping recorded material, our article on seamless YouTube video loops in XSplit covers a separate part of the workflow: getting the source playback right.
Estimate continuous outbound bitrate needs
Start with the bitrate YouTube recommends for your chosen resolution, frame rate and codec, then add the audio bitrate if it is stated separately in your encoder configuration. YouTube's guide is the primary reference for the relevant settings. Do not use a single rule of thumb for every channel: a 1080p stream and a lower-resolution audio-led loop do not necessarily send the same amount of data.
For one destination, the VPS must send approximately the configured stream bitrate continuously, plus protocol overhead and any variation introduced by the software. For multiple destinations, count each outgoing copy. If a VPS relays a 4 Mbps feed to YouTube and also sends a separate copy to another platform, the combined outbound load is roughly two copies of the feed, not one. This is a planning illustration, not a promise about how a particular provider meters traffic or handles network capacity.
You can translate bitrate into approximate monthly traffic using this relationship: megabits per second × 0.45 is approximately gigabytes per day, before overhead. For example, a 4 Mbps stream is about 1.8 GB per hour and about 43.2 GB per day; over a 30-day month that is about 1,296 GB. These are arithmetic estimates based on continuous transmission, not a vendor allowance or an observed usage figure. Add a margin for overhead, reconnects and any additional destinations when asking a provider about transfer limits.
National Informatics Centre (NIC) guidance for its own government webcast workflows specifies 2–4 Mbps of dedicated bandwidth per stream. Its page also describes a static public IP and outbound RTMP port 1935 for a hired-agency path. These are NIC's workflow details, not universal YouTube or VPS requirements. Consult the NIC webcast service guidance for its stated context, and do not substitute its bandwidth figure for YouTube's encoder bitrate table.
The number that matters in your provider conversation is your expected sustained outbound load, including every destination. Ask whether the service has a data-transfer cap, a fair-use threshold, a port or throughput limit, or an acceptable-use restriction that applies to a long-running relay. A large port-speed figure describes a published interface specification; it does not establish that the rate will be continuously available to your individual instance.
Check network, egress, acceptable-use, support and SLA terms
Ask for written answers before paying. Provider sales pages often make hardware and location easy to compare, while the terms that decide whether a 24/7 stream is permitted may be on a separate policy or service-level page. Keep the response and the applicable terms so you know what you purchased.
For network and egress, ask whether the published bandwidth is a port speed, a guaranteed rate, or a maximum, and whether any transfer is metered. Clarify what “unmetered” means in the plan's terms, including any fair-use conditions, throttling, traffic shaping or restrictions on sustained upload. Ask whether the advertised terms apply in the India location specifically. If the provider cannot distinguish those points, plan as though the marketing label does not answer your capacity question.
For acceptable use, describe the actual task plainly: a continuous outbound relay to YouTube, the approximate bitrate, and whether the VPS will send to one destination or several. Ask whether that use is permitted and whether there are limits on long-running processes, streaming protocols or content delivery. Do not infer permission from the fact that a product is called a streaming VPS, or from a generic VPS listing that does not mention streaming.
For support and service levels, distinguish a response target from a resolution guarantee, and a promotional uptime statement from a contractual SLA. Ask what the SLA covers, whether it applies to the chosen location and plan, how outages are measured, and what remedy the terms provide. Ask how to reach support outside business hours and whether the provider offers a way to report a live incident. No SLA wording should be read as a guarantee that YouTube will accept a stream or that your particular encoder will remain connected.
A static IP may be required by a particular workflow, firewall or upstream service, but it is not a blanket condition for every YouTube stream. Likewise, NIC's port 1935 instruction belongs to its described agency workflow; YouTube's recommended secure ingest path is RTMPS. Confirm the required protocol and ports for your chosen software and target, then ask the VPS provider whether outbound traffic on those ports is allowed.
Test the VPS before relying on it for 24/7 streaming
A short purchase test should resemble the real workload. Configure the same resolution, frame rate, codec, bitrate and protocol that you expect to use, then send representative audio and motion. YouTube recommends testing before a live event and monitoring stream health; a stream that starts successfully for a few minutes is not evidence that a host will sustain the workload over a full day or longer.
Begin by confirming that the server is in the location you selected and that the operating system, encoder and stream key are configured correctly. Send a private or unlisted test if appropriate for your channel, and watch YouTube's stream-health feedback alongside the encoder logs. Check for dropped frames, reconnects, bitrate instability and audio issues. If the stream fails, isolate the source, software, protocol, VPS resource use and provider network rather than attributing the problem immediately to one cause.
Test the specific concern that could affect your channel overnight: leave the stream running long enough to observe normal load, check resource use, and confirm how the process behaves after a network interruption or software restart. Do not assume a successful test proves ongoing capacity; it only tells you what happened during that test under those conditions. For symptoms such as a stream stopping on a local connection, our BSNL broadband checks for 24/7 streams can help distinguish home-network issues from the VPS question.
Before moving a channel's regular audience to a new setup, document the configuration and your recovery steps. Keep the stream key private, know how to stop a stale broadcast, and check YouTube Studio if the stream appears live in the encoder but not on the channel. The YouTube guidance on encoder setup and stream health is worth revisiting when you change resolution or protocol. Make changes one at a time so you can identify which adjustment helped.
If your priority is to avoid leaving a personal computer running, StreamNeo removes that specific burden by turning an uploaded video into a YouTube live stream that can continue with your computer switched off. It is YouTube-only, so it is not a replacement for a VPS when you need your own relay software, multiple destinations or control over the server environment.
Make the purchase decision against your own stream
There is no defensible “best” provider on the published evidence alone. Inservers is the more directly described streaming-relay offer in this shortlist, while Contabo documents an India VPS location in Mumbai. That distinction can guide which sales team you contact first, but it is not a performance result or a recommendation that either offer will suit every channel.
Write down your needs before comparing a quote: source method, output resolution and bitrate, number of destinations, whether you will transcode, storage required, and whether you need a static IP. Then compare those needs with the written plan specifications and policy answers. A low monthly price is not useful if the service does not permit your workload; a larger CPU allocation may be unnecessary for a simple relay that does no transcoding.
If you have a small devotional or ambience channel with a single stable feed, a relay may be operationally simpler than encoding on a local machine, but only if the provider's network and usage terms fit. If you run news loops, several destinations or complex graphics, the outbound traffic and software workload may change enough to justify a different configuration. The right choice is the one whose published and written terms match the actual job, and which passes a representative test without implying guarantees beyond that test.
Before committing, compare the operating options on the pricing page. When the file and channel are ready, start free — 24-hour trial, no card.
FAQ
Can I use a VPS for 24/7 YouTube live streaming?
Yes, a VPS can run relay or streaming software continuously, provided the plan's resources and terms fit your workload. Confirm permission for continuous outbound streaming and test the exact setup; neither a product name nor a successful short test proves an enforceable 24/7 commitment.
Which India VPS has enough bandwidth for YouTube Live?
The provider pages reviewed here do not establish a universally sufficient plan or independently verified sustained upload. Calculate the bitrate for your YouTube settings and destinations, then ask the provider how its egress and transfer policies apply to that continuous load.
Does YouTube require a static IP or port 1935?
Do not treat either as a blanket YouTube requirement. NIC specifies a static public IP and outbound RTMP port 1935 for a particular hired-agency webcast workflow, while YouTube recommends RTMPS for live ingest; check the needs of your own encoder and provider policy.
Is Inservers better than Contabo for a stream?
The available evidence does not support a performance ranking. Inservers publishes a streaming-specific New Delhi offer, while Contabo lists Mumbai VPS plans; compare written network, egress, permitted-use, support and SLA terms against your own workload.