Start in the Livepush dashboard for the stream you want to send, choose Add Destination, select YouTube, and use the account-authorisation flow where it is available. You then choose the channel and live event, set its details and privacy, save the destination, and enable it.
If you do not want to link the account, or the authorisation flow is unavailable, create the event in YouTube Studio and enter its RTMP stream key through Livepush’s Configure Stream Keys option. These two methods are not identical: linked accounts provide additional authenticated features, while the manual method must be configured again for each YouTube live event.
Before connecting: confirm YouTube live access
Check YouTube access before troubleshooting Livepush. You need a Google account, a YouTube channel, a Livepush account, and a channel that is verified with live streaming enabled. YouTube’s current guidance is summarised in its live-streaming eligibility and setup help, but the labels shown in YouTube Studio can change.
The first live stream on a channel may not be available straight away. YouTube says that enabling a first live stream takes at least 24 hours after the first request. This is an activation delay, not a fault in Livepush. If you are preparing an always-on devotional channel, study stream or local news loop, request access before you need the first broadcast.
Do not wait until the planned start time to test a newly enabled channel. Sign in to YouTube Studio, go to the live-streaming area, and check whether YouTube lets you create or schedule a live event. If it still shows that live streaming must be enabled, complete that request and allow for the stated waiting period.
You should also decide which channel is meant to receive the stream. One Google account can have access to more than one YouTube channel, and choosing the wrong channel during authorisation can leave you investigating the wrong Studio dashboard later. Write down the intended channel name before you begin.
If your content is a recorded loop, review the material before connecting it. A destination connection only tells Livepush where to send the broadcast. It does not decide whether your music, sermons, news clips or other material has the necessary rights. For a longer preparation checklist, see this guide to avoiding copyright claims on a YouTube radio station livestream.
Open the correct Livepush stream dashboard
Sign in to Livepush and open the stream that should go to YouTube. The relevant dashboard may be labelled Live Input or Pre-recorded Live, depending on how your source enters Livepush. The YouTube destination belongs to that individual stream, so adding YouTube from a general account page may not produce the result you expect.
Look for Add Destination in the stream dashboard. Select it and choose YouTube. Livepush may adjust the wording or position of these controls over time, so use the current label that refers to adding a platform destination rather than relying on an older screenshot.
At this point, pause if you have opened the wrong stream card. For example, a recorded bhajan loop attached to one Livepush stream and a local news loop attached to another should not share assumptions about their YouTube event. Confirm the stream name, source and intended channel before authorising anything.
Livepush’s own product information for linked social accounts describes account linking as the route for one-click live streaming and related authenticated controls. The practical point is simple: begin from the stream that will actually be sent, then add YouTube to that stream.
Authorise YouTube and choose a channel
With YouTube selected as the destination, choose Login with YouTube or the equivalent authorisation button. A Google sign-in window should appear. Sign in with the Google account that can manage the intended YouTube channel, then review the permissions shown before continuing.
If more than one channel is available, select the channel that should receive this stream. Do not choose by memory if several channels have similar names. Open YouTube Studio in another tab if necessary and compare the channel name or avatar.
Authorisation and channel selection are separate decisions. Signing in with the correct Google account does not automatically mean that the correct channel will be selected. Check the channel presented by Livepush before saving the destination.
After the account is linked, Livepush should download the RTMP settings for the YouTube live event as part of the connection. You do not normally need to copy a server URL and key by hand in this preferred flow. The exact wording can vary, but look for a channel or event selection step rather than assuming that authorisation alone has completed the setup.
The linked route is generally the better fit when you operate a recurring channel. Livepush documents linked-account features such as managed titles and access to YouTube comments in its Multi chat tools. Those controls depend on the account connection, so they are not equivalent to merely pasting a stream key.
If the Google sign-in window closes without connecting, return to the Livepush destination screen and check whether the account was actually added. If it was not, start the authorisation again. Avoid creating several incomplete destinations while testing, because that can make it harder to identify which one is intended to be enabled.
Create or select a YouTube live event
Once the channel is selected, choose an existing event or select New Live Event. The available labels may differ slightly in the current dashboard. The important distinction is whether you are connecting Livepush to an event that already exists or asking the flow to create one.
For a new event, enter the title and description. Use a title that tells viewers what the broadcast is rather than leaving a temporary working name in place. For example, a title such as “Morning Aarti and Bhajan Loop” is easier to understand than “Test stream 2”. You can change the content later in YouTube Studio if the linked controls permit it, but it is better to start with the intended information.
If you select an existing event, check its date, time and channel in YouTube Studio. A previously created event may have been made for a different recording, time slot or audience. Livepush can send to the selected destination, but it cannot correct a mistaken event choice.
For a 24/7 recorded channel, think carefully about whether you need one continuing event or a sequence of scheduled events. The connection process does not remove the need to manage the YouTube side of the broadcast. If your source is a collection of recordings, this guide to making a looping playlist live stream covers the content and continuity questions separately from the destination connection.
Do not start the broadcast until the event has been saved and appears in the correct YouTube channel. A title visible in Livepush is not, by itself, proof that the event is public or that viewers can find it.
Set event details and privacy
Set the event’s visibility deliberately. YouTube normally offers privacy choices such as Public, Unlisted and Private, though the current wording and placement should be checked in YouTube Studio. Public is suitable when you want people to find the stream through the channel or YouTube search. Unlisted is useful for a controlled test where viewers need the link, while Private is for restricted access.
Privacy is not a technical test of whether the connection works. A stream can be reaching YouTube correctly while remaining invisible to the audience you expected because the event is unlisted or private. Conversely, making an event public does not fix a missing or disabled Livepush destination.
Review the title, description, thumbnail and audience settings shown in the event flow. If your channel serves children, devotional audiences or students, take particular care with the audience declaration and any restrictions YouTube presents. Use YouTube’s current live-streaming help and Studio guidance for settings that are not specific to Livepush.
For a test, unlisted is often easier to control than public. You can confirm that the video appears, inspect stream health and check the audio without directing an unfinished broadcast to your regular audience. Once the test is complete, use the intended event or update the visibility in YouTube Studio.
If you are running a channel aimed at viewers in India, remember that privacy and account permissions do not change because the audience is local. The same channel access, verification and content rules apply. For a longer-running aarti format, you can also review the preparation steps in how to set up a 24/7 aarti stream on YouTube.
Use RTMP stream-key setup as a fallback
Use the manual route when you do not want to link the YouTube account, or when account authorisation is not available. It is a documented fallback, not a mirror image of the linked-account method.
First open YouTube Studio and use Create followed by Go live. Create or schedule the event, then locate its streaming settings and copy the RTMP stream key for that specific event. Keep the key private. It is a credential used to direct an encoder or streaming service to the event, not a public viewing link.
Return to the relevant Livepush stream dashboard. Choose Add Destination, select YouTube, and then choose Configure Stream Keys or the equivalent manual option. Enter the stream key you copied from YouTube Studio, save the destination, and leave it disabled until you have checked that it belongs to the intended event.
The event must be created first in YouTube. A stream key copied from an old event can send the broadcast to an unexpected destination, and a key from another channel will not become correct simply because it is pasted into the right Livepush account.
Livepush documents two important limitations for this method. You need to repeat the setup for each YouTube live event, and manual setup does not provide YouTube live comments in Livepush Multi chat. A key can support the video relay, but it does not give Livepush the same authenticated account controls as linked authorisation.
| Consideration | Linked YouTube account | Manual RTMP stream key |
|---|---|---|
| Initial setup | Authorise Google, choose the channel and select or create an event | Create or select the event in YouTube, then copy the key into Livepush |
| Repeated events | Choose the relevant event through the linked flow | Repeat the event and key setup for each event |
| YouTube comments in Livepush Multi chat | Supported according to Livepush’s linked-account guidance | Not available according to Livepush’s manual setup guidance |
| Title and account controls | Linked features can provide authenticated title management | A key alone does not provide those account controls |
| Suitable use | Recurring channels and operators who want account-linked features | One-off or deliberately manual broadcasts |
If the stream key may have been exposed, do not publish it in a screenshot, message or public document. Use the current controls in YouTube Studio to review or replace the key. The exact recovery steps can change, so follow YouTube’s current instructions rather than assuming an old key is still valid.
Save, enable and verify the destination
After either setup method, select Save Destination and wait for the save to complete. Then check the YouTube destination’s switch. Livepush must have the destination enabled before it sends the stream there.
A saved destination is not necessarily an active destination. Think of the process as three separate states: the account or key is configured, the destination is saved, and the destination is enabled. Confirm all three before looking for the stream in YouTube.
Start with a controlled test if possible. In YouTube Studio, check that the selected event is the one receiving the broadcast, then inspect the preview or stream-health area. YouTube recommends monitoring stream health and having enough upload capacity when sending to more than one platform, including the combined target bitrates for those destinations. Its guidance on streaming across platforms is the right place to check the current requirements.
If the destination does not work, use this order:
- Confirm that YouTube live streaming is enabled for the intended channel.
- Confirm that the correct Google account and channel were selected.
- Confirm that the event title and privacy setting belong to the intended broadcast.
- Confirm that the Livepush destination was saved.
- Confirm that its on/off switch is enabled.
- For manual setup, compare the entered key with the key for the selected event.
- Check YouTube Studio for stream health and any account or event warning.
If a linked account has become disconnected, reconnect it and save the destination again. If the event is visible but the broadcast is not, check whether the source stream is running in Livepush before changing YouTube settings. Changing several controls at once can hide the actual cause.
The same verification habit matters if you later move to a workflow that removes the need to keep a local computer running. For example, StreamNeo is designed for the separate problem of uploading a video once and having it sent to YouTube while the computer is switched off, with automatic monitoring and restart. It does not change which YouTube channel, event or privacy setting you should verify.
Once the test is correct, write down the chosen channel, event name and connection method. That small record helps when a team member later sees several similarly named destinations or when a recurring broadcast needs to be recreated using the manual route.
Before committing, compare the operating options on the pricing page. When the file and channel are ready, start free — 24-hour trial, no card.
FAQ
Does YouTube live activation happen immediately?
No. YouTube says enabling a first live stream takes at least 24 hours after the first request. Request access before setting a launch time and confirm in YouTube Studio that the channel can create a live event.
Is linking a YouTube account the same as using an RTMP stream key?
No. Linked authorisation lets Livepush work with the selected channel and provides account-linked features described by Livepush, including YouTube comments in Multi chat. Manual RTMP setup sends using an event key, must be repeated for each event, and does not provide those same authenticated controls.
Why can I not see the stream after saving it?
Check that the destination was saved and enabled, then confirm that the intended channel and event were selected. For a manual connection, verify that the key belongs to that exact event, and inspect YouTube Studio for stream-health messages.
Should I make the event public while testing?
Not necessarily. An unlisted event can let you test the video and audio with selected viewers before publishing it, while a private event restricts access further. Choose the visibility in YouTube Studio based on who should see the test and the final broadcast.