If you need to replace a video in a running Livepush YouTube playlist, Livepush says active playlists can be changed while the broadcast is live: you can swap videos, reorder them, or add clips. Open the stream’s Pre-recorded Live dashboard and inspect its current playlist controls; the public instructions do not document the exact replacement steps or when a change to the video currently playing takes effect.
Before editing, establish whether you have a playlist problem at all. If the picture is moving but you hear nothing, first check YouTube’s player, your browser and device, then compare one item with the rest of the stream. That helps distinguish a local playback issue from silence in a source, playlist, broadcast or destination.
Check whether YouTube or the broadcast is silent
A viewer’s report that a stream is silent does not tell you where the sound disappeared. Start with the simplest separation: is the problem only at the viewer’s end, or can you confirm that the live output itself has no audible sound? Do not replace playlist content until you have made that distinction; editing the wrong part of the chain can leave the original issue untouched.
Open the live stream on YouTube and listen directly, rather than relying only on the Livepush dashboard preview or an embedded player elsewhere. Confirm that playback is live and that the player is not muted. If available to you, listen from a second device or browser as well. YouTube’s troubleshooting tips for video playback cover player and device checks that can help rule out a local playback issue.
If YouTube is audible on your own device but a viewer reports silence, ask them to check their player and device before you change the broadcast. A muted tab, low system volume, Bluetooth output routed to another device or a connected headset can all make an otherwise audible stream seem silent. These are checks, not proof: a second listener is useful because it gives you another playback path to compare.
If several listeners and devices hear silence on the live output, investigate the video and broadcast path next. If only one person does, start with that person’s player and device. If YouTube is silent but the dashboard preview is audible, look at the destination path and the actual YouTube event, rather than treating the playlist file as the established cause.
Test player, browser and device volume
On YouTube, check that the player’s speaker control is not muted and raise its volume to a clear listening level. Check the device’s system volume and the browser tab or application volume where those controls exist. Also verify the selected output: a computer may be sending sound to a monitor, headset, Bluetooth speaker or other device you are not listening to.
Try an ordinary YouTube video in the same browser and on the same device. If that is silent too, the issue is likely not specific to your Livepush playlist. Check another browser or device before changing the broadcast. If the ordinary video plays sound but your live stream does not, continue with stream-specific comparisons; do not infer that the playlist is at fault merely because only the live stream is affected.
These checks are especially useful when the stream picture is visible and the complaint comes from a single viewer. A viewer may have muted a browser tab earlier, switched audio outputs, or left the player volume at zero. You can ask them to test a different YouTube video and then return to the live stream, without asking them to change your channel’s broadcast settings.
For a Windows setup in which you are monitoring a stream through OBS, the application’s audio output choice can also matter. The guide to setting OBS audio output for a bhajan stream is relevant when OBS is part of your monitoring or contribution path. Livepush’s pre-recorded workflow is cloud-run, however, so an OBS setting on your own computer is not automatically the source of audio for that broadcast.
Compare one playlist item with the whole stream
Once local playback checks pass, compare the scope of the silence. Is one video silent while the next is audible, or is every item silent? If the playlist contains multiple videos, note which item was playing when the report began and whether the sound returns at a transition. A problem that tracks one item points you towards that source file or its audio content; a problem that spans all items calls for checks of the broader broadcast and destination path.
A practical record is enough: write down the approximate time, the item on air, whether the picture continued, and whether audio returned when the playlist moved on. Do not use a time note to claim a cause; use it to compare what listeners heard with the order and status you can see in the dashboard. If you have not observed a transition or verified the output, the point at which silence began remains uncertain.
If only one video appears affected, prepare a known-good replacement or test source, but first verify that it contains audible sound. A file can have a perfectly visible picture and no usable audio track. Listen to it locally with a media player, and confirm that the relevant section is not simply quiet. If the source is a long devotional recording, for example, check a part with music or speech rather than a silent introduction.
If every item is silent, replacing one video is unlikely to be a sound diagnosis. Check whether the broadcast itself is sending audio and whether the destination is receiving it. For an OBS-based workflow, the saved profile and scene collection guide can help you find which configuration is active, but avoid applying OBS-specific steps to a cloud playlist unless OBS actually participates in your path.
Check another device or YouTube video
Cross-checking gives you a useful matrix without requiring specialist tools. Play the live stream on another device, and play a separate YouTube video on the original device. If the live stream is silent everywhere while other videos have sound, focus on the live broadcast and its content. If the live stream is audible elsewhere but silent on one device, focus on that device’s player, browser or output selection.
| Live stream on the affected device | Same live stream elsewhere | Another YouTube video on affected device | What to check next |
|---|---|---|---|
| Silent | Audible | Audible | Player, browser, output device or local playback settings |
| Silent | Silent | Audible | Stream-specific source, playlist, broadcast or destination path |
| Silent | Silent | Silent | Device or browser audio, then repeat the live-stream check elsewhere |
| Audible | Audible | Audible | Ask the original reporter to repeat checks; the issue may not be present now |
This comparison narrows the investigation; it does not prove which setting failed. A temporary change may have ended before you tested, and different devices can use different speakers or network paths. If another listener can confirm the stream is silent at the same time, you have stronger evidence to investigate the broadcast rather than a single viewer’s device.
YouTube’s live stream troubleshooting guidance is a useful official reference for checking a live event. Keep the distinction clear: YouTube player checks address playback at the viewer’s end, while your source and broadcast checks address what is being sent to the destination. Do not treat a visible live preview alone as confirmation that the outgoing stream has sound.
Inspect the source and destination audio path
For a single silent playlist item, inspect that video first. Confirm that it is the intended file, that it has an audio track, and that the section in question contains audible material. If it was uploaded or imported from a cloud drive, make sure you are selecting the intended version rather than a similarly named file. Listen to the candidate replacement before adding it, so that you do not swap one silent source for another.
For silence across the playlist, trace the audio path from source through broadcast to YouTube. In a computer-based encoder workflow, that means confirming the media source’s audio is enabled, the encoder is receiving it and the stream output includes it. In a cloud pre-recorded workflow, check the selected playlist items and the dashboard’s current stream status, then compare its preview with YouTube’s actual live output. The path differs by workflow, so do not apply encoder instructions to a broadcast that is not using that encoder.
A stream that is audible in a dashboard preview but silent on YouTube suggests a difference between preview and destination output. A stream silent in both places gives you reason to inspect the source selection and broadcast path, but still does not establish which part is responsible. Capture what you observe and consult the current product help or support if the dashboard does not expose enough detail. For the broader destination connection, the explanation of RTMPS and YouTube Live is useful context, although it is not a substitute for checking whether your particular workflow uses that path.
Replace the item in Livepush’s playlist
Livepush’s help article on adding videos to a pre-recorded live stream describes opening the relevant Pre-recorded Live stream dashboard, choosing Add Video to upload or import a source, selecting it and choosing Add to Playlist. Imports may be from Google Drive, Dropbox or a downloadable web URL, according to that help page. Those are the documented steps for adding content, not a complete documented sequence for replacing an existing item.
For a stream that is already running, Livepush’s multi-video playlist information says that active playlist content can be swapped, reordered or expanded without interrupting the broadcast. Open the relevant stream in the dashboard and inspect the controls shown for its active playlist. Use the current interface to identify the item you mean to change, and verify the selected replacement before confirming the edit. Do not rely on an assumed button name or removal sequence: the public instructions reviewed do not specify those controls.
The help material also does not explain exactly when replacing the item currently on air takes effect. It may not be clear from the published instructions whether the change cuts in immediately or at a later transition. Check the dashboard preview and the YouTube live output after editing, and tell viewers to expect a possible transition rather than promising an instant switch. If timing matters, confirm it with Livepush support before making a change during an important broadcast.
Plan eligibility needs the same care. Livepush’s product and playlist information describe features associated with its pre-recorded live and schedule offerings, but plan terms can change. Check the current account plan and pricing information before assuming that on-air editing is available to your account; do not infer access from a general feature description. If the controls are missing, verify both the selected stream type and current plan with Livepush rather than trying a guessed workaround.
Looping is separate from replacing an item. Livepush’s guide to continuous video looping describes Loop Video as the setting for repeating playback; the guide says a stream can be started or scheduled with looping enabled and continues until manually stopped. It does not present looping as a prerequisite for editing a playlist. Use it when you want continuous repeat playback, not as a fix for silence or a required step for a replacement.
If this change sits within a broader always-on operation, the key distinction is whether you are editing a schedule or changing what viewers currently see. A scheduled event can be prepared ahead of time; an active playlist edit affects a live audience and its timing should be checked. Livepush describes cloud-run pre-recorded broadcasts and YouTube as a supported destination on its pre-recorded live product page. That does not remove the need to verify the live output yourself.
Before committing, compare the operating options on the pricing page. When the file and channel are ready, start free — 24-hour trial, no card.
FAQ
Can I replace a video without stopping a Livepush stream?
Livepush says you can swap, reorder or add videos to an active playlist without interrupting the broadcast. The public instructions do not show the exact control sequence for replacing a specific item, so inspect the current dashboard or ask Livepush support if you cannot identify the right control.
Will a replacement start playing immediately?
The available public help does not specify whether an edit to the item currently on air takes effect at once or at a later transition. Check the dashboard preview and YouTube output after the edit, and do not promise viewers a precise cutover time without confirmation.
Does Loop Video have to be enabled to replace a playlist item?
The published looping guide describes Loop Video as a continuous-playback setting, not a condition for playlist editing. Enable it if you want content to repeat, and treat replacement as a separate playlist operation.
What should I do if all playlist videos are silent?
First rule out the YouTube player and device by checking volume, another device and another YouTube video. If the live stream remains silent across devices, inspect the source and broadcast-to-destination path; a single replacement is not an established fix for a whole-stream problem.