You can send one encoder feed to multiple YouTube channels with Livepush by connecting the channels, adding each one as a destination, and starting one stream from your encoder. Livepush then relays that feed to the destinations you have enabled.
The important planning point is that each YouTube channel uses a destination slot. Before you configure the broadcast, count the channels you need and compare that number with the destination limit on your Livepush plan.
Understand the one-feed, multiple-destination workflow
Your encoder is the source of the video and audio. It might be OBS, vMix, Streamlabs, Wirecast, Zoom or compatible hardware. Instead of sending a separate stream from the encoder to every YouTube channel, you send one feed to Livepush. Livepush distributes that input to the YouTube destinations selected for the broadcast.
This changes the shape of the setup. You are not asking one computer to maintain several independent encoder outputs. You are preparing one programme feed and choosing where that feed should go. If the same devotional loop, local news bulletin, study session or ambience video belongs on several channels, this can be simpler than managing separate encoder profiles.
The feed itself remains shared. If you change the video, audio, bitrate or encoder output, the change affects every enabled destination. That is useful when all channels should carry the same material, but it is not a way to create different programmes from one source. A bhajan loop and a local news loop still need separate source feeds if they are meant to run at the same time.
A destination is also not the same thing as a YouTube live event. A linked YouTube channel gives Livepush a channel to which it can send the broadcast. You may still need to select or prepare the relevant live event, title, description and visibility settings for that channel. Do not assume that adding a destination automatically creates a complete scheduled event with identical metadata everywhere.
This distinction is useful for a 24/7 operator. The common part is the programme feed. The channel-specific part includes the destination selection, YouTube event details, audience, branding and any moderation arrangements. Keep those two layers separate in your checklist.
If your shared feed is made from several files, prepare it before connecting destinations. For example, the advice in the guide to looping multiple MP4 files on a 24/7 YouTube livestream is relevant to the encoder side of this workflow, but it does not remove the need to configure each YouTube destination.
Connect each YouTube channel
In Livepush, link the YouTube accounts or channels that you intend to use. Livepush describes this as an authorisation flow through the platform, after which the connected channels can be selected as separate destinations. Multiple YouTube channels can be linked to one Livepush account according to its product documentation.
Begin with a written list rather than clicking through the dashboard without a plan. Include the channel name, its YouTube handle or account, the intended programme, and whether it should receive this particular broadcast. Similar channel names are easy to confuse, especially when one person manages a devotional channel, a regional-language channel and a clips channel under related branding.
A practical list might look like this:
| Channel | Programme for this feed | Use in this broadcast | Event prepared |
|---|---|---|---|
| Morning Bhajan | devotional loop | Yes | Yes |
| Temple Darshan | devotional loop | Yes | Yes |
| Hindi Study Room | recorded lessons | No | Not applicable |
Use the account connection screen to authorise the intended channels, then check the resulting channel names in Livepush. Do not rely only on the order in which accounts appear. Open the relevant YouTube channel separately if you need to confirm its identity before enabling it.
Livepush states that access can be revoked from the platform side. Treat the authorisation step as an account permission that you should understand and review, not as a permanent transfer of ownership. You should also check the current permissions and account guidance on the official YouTube Help page for managing channel access before connecting a channel managed by a team.
There is also a manual route using a YouTube RTMP stream key. Livepush documents this as an alternative to linking the channel. It can be useful when you do not want to use the linked-account workflow, but it has different practical consequences: the documented manual guide says each live event must be set up again, and comments from that channel do not appear in Livepush Multi Chat.
For a channel that runs every day, repeated manual event setup can become the main source of mistakes. A linked channel may fit better when you want to manage destinations from a persistent dashboard. For a one-off broadcast or a channel with a narrowly defined event process, a stream key may still be suitable. Choose based on how often you repeat the workflow, not simply on which screen looks quicker the first time.
Add the channels as stream destinations
Once the channels are connected, open the stream dashboard and use the destination control. The documented route is labelled “Add Destination”, although interface labels can change. Choose YouTube, then select or add the connected channels intended for this stream.
Work through the destinations one at a time. After adding a channel, confirm that its name appears in the destination list and that it is enabled. Then compare the list with your written channel plan. The goal is not just to see that several channels are connected to the account; it is to confirm that the correct channels are attached to this specific broadcast.
For example, if you have four connected channels but only two should carry tonight’s feed, add only those two. A connected account is available for use, while a selected destination is part of the current stream configuration. Keeping those ideas separate makes it easier to reuse the account without accidentally broadcasting a programme to every channel you manage.
Before starting, check the following for each destination:
- The displayed channel name is the intended one.
- YouTube is the selected platform.
- The destination is enabled for this stream.
- The correct live event or channel-level target is selected where the interface asks for one.
- The planned title, description, visibility and thumbnail have been checked on YouTube.
The final item matters because identical video does not require identical channel presentation. A local-language channel may need different text from an English-language channel. A worship channel may use a fixed programme description, while a news loop needs the date or bulletin context reviewed before going live.
If you are preparing a long-running stream, keep a record of the destination configuration. Write down which channels are intentionally included, the event name, and the order in which you checked them. This is particularly useful when the same Livepush account contains channels for different owners or projects.
Check destination slots against your plan
Count the YouTube channels that will receive the broadcast. Each selected YouTube channel consumes one destination slot; adding several channels does not turn them into a single shared slot. You must also consider any other destinations or simultaneous streams covered by the plan rules.
Livepush’s pricing help page lists one destination per platform on Free, three on Pro, five on Creators and fifteen on Business, as listed on Livepush’s site in September 2026. These are destination limits, not a promise that every other stream or platform allowance will be available at the same time. Check the complete current plan table before purchasing or changing a plan.
| Intended YouTube channels for one feed | Destination capacity to check | Planning result |
|---|---|---|
| One | At least one YouTube destination | One channel can fit within the listed Free allowance, subject to the other plan rules. |
| Two | At least two YouTube destinations | The listed Free allowance is not enough for both at once. |
| Three | At least three YouTube destinations | The listed Pro allowance reaches this channel count, subject to other limits. |
| Four or five | At least four or five YouTube destinations | The listed Creators allowance reaches this range, subject to other limits. |
| Six to fifteen | At least six to fifteen YouTube destinations | The listed Business allowance reaches this range, subject to other limits. |
The plan names and limits above are vendor information, not independent performance measurements. They are also subject to change. Reconfirm them in Livepush’s current plans and pricing help article on the day you configure the account.
The table gives you a first check, not a full capacity calculation. If you run two different broadcasts, stream to other platforms, or need several concurrent streams, review the overall destination, platform and simultaneous-stream limits. A plan that fits one five-channel broadcast may not fit a second broadcast at the same time.
Do not count only the channels you expect to be live at this minute if your normal operation switches between groups. Instead, decide whether your workflow needs all destinations available under one account, or whether only a smaller group is used for each stream. The distinction may affect how you organise accounts and plans, but do not assume that unused connected channels are free extra capacity.
Before committing to a plan, write a simple capacity note: number of YouTube channels in this broadcast, number of other platforms, number of simultaneous streams, and whether a second operator might need the account. This takes less time than discovering that a destination cannot be added after the encoder is already running.
Start the stream from the encoder
After the destinations are ready, configure your encoder with the Livepush input details. Livepush documents RTMP and SRT input support and names several compatible encoder applications and devices. Use the input protocol and settings shown in your current Livepush account rather than copying values from an old tutorial.
In OBS, for example, the relevant work is to select the service or custom server details supplied by Livepush, enter the stream key or input credential shown in the dashboard, choose the prepared source, and start streaming. The same principle applies to another encoder: one output goes to Livepush, while Livepush handles the enabled destinations.
Do a short private or unlisted check when the channel workflow allows it. Confirm that the picture is visible, the audio is present, and the source is the material you intended. If you use a long loop, watch the transition between files before relying on it overnight. A black frame, missing audio or abrupt transition at the source will be carried to every destination.
This is where the encoder and destination responsibilities meet. If the input does not reach Livepush, none of the YouTube channels can receive the feed. If the input reaches Livepush but one destination is disabled or misconfigured, the remaining destinations may still behave differently from that one. Troubleshoot the shared input first, then inspect individual destinations.
For a computer-based encoder, make the local setup dependable before treating the relay as the solution to everything. Prevent sleep, keep the correct source collection loaded, check the audio device, and avoid an operating-system update or unrelated workload during the start window. If you need help with a source-side fault, the OBS black-screen troubleshooting guide covers one problem that can make a healthy destination look broken.
If you are running a channel continuously, consider whether you want the encoder computer on all night. A cloud-based workflow such as StreamNeo is designed for the specific pain of leaving your own computer running: you upload the video, provide the YouTube stream key, and the broadcast can continue while your computer is switched off, with automatic monitoring and restart if it drops. It is YouTube-only, so it does not replace a multi-destination Livepush workflow when you need Livepush to relay one feed to several channels.
Verify each destination’s status
Do not stop at the encoder showing “streaming”. That confirms the input side, not necessarily that every intended YouTube channel is receiving and presenting the broadcast correctly. Review the Livepush dashboard and inspect each destination’s status individually.
Use a destination checklist with one row per channel. Confirm that the destination is enabled, that the expected event or channel target is selected, and that the status changes as expected after the encoder starts. Then open the relevant YouTube channel or YouTube Studio view and verify the live presentation from the channel’s side.
You are checking for practical differences, not trying to infer a guarantee from a single status label. One destination may have an event mismatch, a privacy setting that differs from the others, or a channel-specific restriction. If the shared video appears on some channels but not another, compare the destination configuration before changing the encoder.
Also compare metadata. The video feed may be identical while the title, description, thumbnail, visibility or scheduled event differs. Record any differences that are intentional. If they are not intentional, correct them before the stream becomes difficult to supervise.
For overnight operation, keep a lightweight monitoring routine. Check the dashboard after starting, inspect the YouTube-side view for each important channel, and revisit the statuses after the stream has been running long enough for you to be confident that the initial connection was not the only successful moment. Do not describe this as a guarantee of identical behaviour across destinations; it is simply a sensible verification process.
If a destination drops, first note whether the shared input is still healthy. A shared-input failure points towards the encoder or Livepush input. A single-destination failure points towards that destination’s connection, event or YouTube-side configuration. Keeping these cases separate avoids restarting a working encoder when only one channel needs attention.
Plan for channel-specific event needs
Multiple destinations are most useful when the same feed has a genuine reason to appear in several places. The administration still belongs to each channel. Give every destination an owner, a purpose and a check before launch.
For a devotional operator, two channels might carry the same prayer loop but use different languages in their titles and descriptions. For a study business, one channel might publish the full class while another carries a regional version. For a local news organisation, the same bulletin feed may be useful on several branded channels, but each channel still needs its own audience and moderation plan.
Prepare channel-specific details in advance:
- Channel name and owner.
- Intended live event or stream target.
- Title, description and thumbnail.
- Visibility and schedule decision.
- Moderation contact and comment policy.
- Destination slot required by the plan.
- Person responsible for checking it after launch.
Do not assume that one event action in YouTube will update every channel in the same way. A linked channel and a live event are different parts of the workflow, and the exact controls available can depend on the current YouTube account and Livepush interface. Check the current YouTube Live streaming documentation for the channel-side requirements.
Copyright and channel policy also remain channel responsibilities. Sending the same feed to several channels does not change who owns the music, footage, lessons or news material, and it does not guarantee that YouTube will treat every channel or event identically. Check the current official YouTube policies for your content and audience rather than assuming that a multi-destination setup provides approval or protection.
A long loop needs particular care. Repeating material across several channels can make stale titles, incorrect dates or unchanged descriptions more noticeable. If the content is a rain, nature and ambience loop for a 24/7 relaxation channel, review the loop and metadata together. The same operational discipline applies to bhajans, worship videos, podcasts, lessons and news.
Finally, keep a recovery note. It should say which encoder input to restart, where to inspect destination status, which channels are intentionally enabled, and who can change YouTube event details. A second operator should be able to follow it without guessing which similarly named channel was intended.
Before committing, compare the operating options on the pricing page. When the file and channel are ready, start free — 24-hour trial, no card.
FAQ
Can I send one Livepush feed to several YouTube channels?
Yes. Livepush documents a one-encoder-input workflow in which the feed is distributed to selected destinations. Connect the channels, add each required channel as a destination, and start one output from the encoder.
Does each YouTube channel use a destination slot?
Yes. Each selected channel consumes one destination slot. The listed allowances are one destination per platform on Free, three on Pro, five on Creators and fifteen on Business, as listed on Livepush’s site in September 2026; verify the current plan table before relying on those limits.
Can I use a YouTube stream key instead of linking a channel?
Livepush documents a manual stream-key method. Its guide says that each live event must be set up again, and comments from that manually connected channel do not appear in Livepush Multi Chat, so compare this with the linked-account workflow before choosing it for a regular channel.
Does adding a destination create the YouTube live event automatically?
Do not assume that it does. A connected channel, a selected destination and a YouTube live event are separate parts of the setup. Check the destination and the YouTube-side event details for each channel before starting the broadcast.