If Live Redirect is missing or not working on your monetized YouTube channel in India, check the sender’s eligibility, the destination channel’s permissions, the stream format and the Studio setup. YouTube’s published Live Redirect guidance lists requirements separately from monetization; it does not establish whether India has an additional restriction for this feature.
Live Redirect is configured on the stream in YouTube Studio. Being monetized is not a substitute for checking the feature’s own requirements, and a failure to redirect does not, by itself, show that monetization caused the problem. Work through the checks below before drawing a conclusion about regional availability.
What Live Redirect does
Live Redirect sends viewers from your live stream to a selected destination when your stream ends. You can route them to a Premiere or to another channel’s live stream. YouTube says viewers may need to wait briefly while playback reloads after the originating stream ends. The feature is therefore an end-of-stream hand-off, not a way to switch viewers between channels in the middle of your broadcast.
There are two roles to keep straight. The sending channel is the one whose stream is ending and whose creator sets the destination in Studio. The receiving channel is where viewers are sent. If you are redirecting to somebody else’s stream, the receiving channel has to permit the redirect from your channel; being able to view that stream does not automatically mean you can send your audience there.
This distinction matters when you troubleshoot. A missing destination can be a receiving-channel permission issue, while a missing Redirect control can point to sender eligibility, stream format or account-specific availability. YouTube’s Live Redirect help page describes the eligibility, permissions and setup flow. Start with those documented checks rather than treating a monetized badge as the explanation.
Does monetization affect eligibility?
The reviewed YouTube Help guidance does not say that monetization status controls access to Live Redirect. It states that creators sending a redirect need more than 1,000 subscribers and no Community Guidelines strikes. These are the stated sender checks; monetization is a separate set of earning features and policies.
That separation is useful, but it is not a reason to infer facts about your particular account. If Studio shows a policy notice, an account limitation or another feature restriction, read that notice and check its scope. A separate account issue could coexist with a monetized channel, but the material reviewed here does not identify monetization itself as the cause of Redirect being absent.
YouTube documents live earning controls separately, including ads, Super Chat and Super Stickers, and channel memberships. Its guidance also cautions that an ad slot is not guaranteed to serve an ad. These settings describe how an eligible monetized live stream may earn; they do not replace the Live Redirect subscriber, strike, permission or format checks. See YouTube’s live-stream monetization guidance if the issue you are seeing is about earnings rather than audience hand-off.
Keep the diagnosis narrow. If ads are not appearing, check monetization settings and ad delivery expectations. If Redirect is missing, first test the Redirect criteria and Studio path. Do not enable or change earning features expecting that alone to make the redirect option appear.
Check sender eligibility
First check the channel that is ending its stream. YouTube Help says the sending creator must have more than 1,000 subscribers and no Community Guidelines strikes. The wording is more than 1,000, not a general monetization threshold. Check the current channel state in YouTube Studio and compare it with the language on YouTube’s help page, rather than relying on an old note or a third-party summary.
Next, look for any active notices or limitations associated with the channel. A channel may have a separate policy or feature issue, and it is worth reading what YouTube actually says about that account. Do not treat every restriction as a Redirect restriction without evidence: note the notice, the affected feature and any action YouTube asks you to take. The sender eligibility requirements published for Live Redirect remain the starting point.
If you manage a continuous playlist or prerecorded channel, the Redirect decision is still separate from how the stream itself is produced. For example, a channel operator may use a 24/7 Indian music radio-style setup to keep a stream running, but the production method does not replace the Redirect checks. Remove the accidental space in the URL if copying it: the correct address is /blog/how-to-stream-a-24-7-indian-music-radio-style-channel-on-youtube-from-pre-recorded-videos.
If the sender appears to meet the documented requirements and the control is still unavailable, record what you checked: subscriber count, strike status, stream format and the exact Studio location where Redirect is absent. That record will make a question to Creator Support more specific than simply saying the channel is monetized and Redirect does not work.
Check destination permissions
For a redirect to another channel’s live stream, ask the receiving channel owner to check whether it permits your channel to redirect viewers to it. The destination’s settings can allow channels it subscribes to, all channels, or selected channels on a manually approved list. Those are permissions controlled by the destination, not by the sender’s monetization settings.
The subscribed-channels option has a condition: YouTube’s help page says subscriptions need to be public for that route. If the destination owner has private subscriptions, do not assume that being subscribed is enough; ask them to review the available permission choices and select one that includes your channel. Alternatively, they can permit all channels or add your channel specifically, depending on how they want to manage incoming redirects.
YouTube documents a limit of up to 100 channels on the specific-channel list. Treat this as a platform rule, not a target or an estimate. If the destination owner already manages a full list, they will need to review the approved channels rather than assuming another name can be added. The official Live Redirect instructions explain the permission choices and their combinations.
If you are sending viewers to a Premiere on your own channel, the cross-channel permission check is not the same issue. Confirm that the intended Premiere is available to select and that you are editing the correct live item. If you are sending viewers to another creator, ask them to confirm the permission setting from their own Studio account; the sender cannot grant permission on the recipient’s behalf.
Configure Redirect in YouTube Studio
Open YouTube Studio and go to Content, then Live. Find the relevant live item and choose Edit. In the item’s Customization settings, open Redirect and choose Add. Select the intended Premiere or eligible live stream, then save the change. YouTube’s documented route is tied to the particular live item, so check that you are editing the stream you plan to end, not a different broadcast or archived item.
After saving, revisit the same item and confirm that the intended destination is still selected. If the stream has several scheduled items, give them clear names or note which one is active so that you do not configure the wrong entry. Then confirm the receiving channel’s permissions if it is another channel. A destination that does not meet the permission conditions may not appear for selection.
There is also a format check. YouTube lists Live Redirect as available for horizontal live streams and not for the vertical live feed. If you are preparing a vertical broadcast, do not interpret the absent option as proof that monetization or geography is responsible. Verify the format against YouTube’s live streaming feature comparison, then test the documented path with a horizontal stream if that suits your planned broadcast.
Before the event, make a simple operational note: which Studio item is configured, which destination is selected, and who has confirmed the receiving permission. You do not need to infer success from the stream being monetized. The useful evidence is that the Redirect setting is present and saved, the destination is eligible and permitted, and the originating stream is in a supported format.
Troubleshoot availability and setup
Use the checks in a fixed order so you do not mix unrelated symptoms. First confirm sender eligibility: more than 1,000 subscribers and no Community Guidelines strikes. Second confirm the destination permission if routing to another channel. Third confirm the stream is horizontal, then reopen the intended item in Studio and check Edit, Customization, Redirect, Add.
If the destination is missing from the list, ask whether it is an upcoming Premiere or live stream and whether the receiving creator’s settings allow your channel. A channel owner can verify this from their Studio permissions; the sender’s ability to find or watch a video is not evidence that redirect permission is enabled. If the target is a Premiere, check that you are selecting the correct item rather than a different scheduled event.
If the Redirect control itself is absent, check that you are in the Live tab and editing the correct stream, then confirm the horizontal format and sender criteria. Read any Studio notice attached to the account. Keep a note of the exact item, format and missing control, and take a screenshot for your own support request if helpful. This turns a vague issue into a reproducible description without presuming a cause.
If the selection is saved but viewers do not seem to move, distinguish between configuration and the viewer experience. YouTube says viewers should wait briefly after the originating stream ends while playback reloads. Check the selected destination, then test the hand-off with a colleague or another account where practical; do not assume that an ad break or monetization status is part of the redirect mechanism.
A separate continuity problem can look similar to a redirect problem. If your stream does not end as expected, viewers may never reach the point at which the hand-off occurs. For operators using OBS, keeping a stream running after shutting down your computer addresses a different operational question: stream continuity. Likewise, advice on restarting an FFmpeg YouTube stream automatically concerns recovery when an encoder stops, not Redirect eligibility. Keep those problems separate when describing the fault.
What is known about India
The official guidance reviewed for this article does not settle whether India has an additional Live Redirect-specific restriction. It does not establish an India-only ban, and it does not guarantee that every eligible channel in India will see the feature. The correct conclusion is limited: the published material gives the sender requirements and setup checks, while the regional question remains unresolved by those sources.
This matters because YouTube’s monetization programme and individual earning features can have country or region criteria. Those rules should not be silently transferred to Live Redirect. YouTube’s YouTube Partner Programme overview sets out monetization criteria, but the reviewed guidance does not say that any India-specific monetization detail determines Live Redirect access.
If the sender, destination, format and Studio path all check out but the option remains absent for a channel in India, check current notices in Studio and ask YouTube Creator Support for an account-specific answer. Include the channel’s country, the live item and format, the sender eligibility checks, the destination permission status and what you see in the Redirect menu. Ask specifically whether Live Redirect is available for that channel; avoid presenting a regional policy as established unless YouTube confirms it.
This careful approach is more useful than guessing from the monetized status. It gives support the relevant facts and leaves room for an account-level restriction, a setup issue or an availability question without asserting which one applies before there is evidence.
Keep the channel workflow separate
Live Redirect is a YouTube Studio feature, while the rest of a 24/7 channel’s workflow may involve preparing a playlist, keeping a stream continuous and ending or handing it off at the right time. Treat these as connected operational tasks, not as one setting. If a devotional channel, local news loop or study stream is scheduled to finish, the operator should verify the Redirect destination on the relevant live item in advance and also know how the source stream is managed.
For example, a small channel may run a loop from a computer and shut it down manually at the end of a programme. That operating choice does not decide whether Redirect is available, but it affects whether the stream ends when the creator expects. If you are planning a continuous Hindi lo-fi channel, use the relevant stream-production guidance for continuity and the YouTube Help workflow for Redirect. Do not treat a tool used for one task as evidence that another YouTube feature is enabled.
A short pre-event checklist is usually enough: confirm that the correct live item is edited; verify sender requirements and the supported horizontal format; confirm that the destination is available and permitted; save the Redirect selection; and decide who will observe the stream ending. After the broadcast, note whether the viewers reached the selected destination and whether any Studio message appeared. Those observations help you distinguish a configuration mistake from a question that needs YouTube support.
If you are still comparing ways to operate the channel, make that decision separately from this platform troubleshooting. The Redirect fix itself is not a reason to buy equipment or change monetization settings. First establish what Studio allows for your account, then choose a production workflow that matches how often you need to publish and how you want to handle interruptions.
Before committing, compare the operating options on the pricing page. When the file and channel are ready, start free — 24-hour trial, no card.
FAQ
Does monetization enable YouTube Live Redirect?
The reviewed YouTube Help guidance does not say that monetization enables Redirect. It gives separate sender checks: more than 1,000 subscribers and no Community Guidelines strikes. Confirm the current criteria in YouTube Help and in Studio for your channel.
Why is another channel missing from the Redirect list?
The destination channel must allow your channel to redirect viewers to it, and the intended live stream or Premiere must be available to select. Ask the destination owner to check their permission settings, including whether they allow your channel specifically or use a broader option.
Does Live Redirect work in India?
The official guidance reviewed here does not resolve whether India has an additional Live Redirect-specific restriction. Do not infer a ban or a guarantee from the public materials; check Studio notices and ask Creator Support if the documented checks pass but the option remains unavailable.
Can I use Redirect on a vertical live stream?
YouTube’s feature comparison lists Live Redirect for horizontal live streams, not the vertical live feed. Check the current comparison and the format of the live item you are editing before treating the missing control as an account or regional issue.